diff mbox series

[1/4] usb: typec: hd3ss3220: configure advertised power opmode based on fwnode property

Message ID 20241107-usb-typec-controller-enhancements-v1-1-3886c1acced2@zuehlke.com (mailing list archive)
State New
Headers show
Series usb: typec: hd3ss3220: enhance driver with port type, power opmode, and role preference settings | expand

Commit Message

Oliver Facklam via B4 Relay Nov. 7, 2024, 11:43 a.m. UTC 
From: Oliver Facklam <oliver.facklam@zuehlke.com>

The TI HD3SS3220 Type-C controller supports configuring its advertised
power operation mode over I2C using the CURRENT_MODE_ADVERTISE field
of the Connection Status Register.

Configure this power mode based on the existing (optional) property
"typec-power-opmode" of /schemas/connector/usb-connector.yaml

Signed-off-by: Oliver Facklam <oliver.facklam@zuehlke.com>
---
 drivers/usb/typec/hd3ss3220.c | 53 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
index fb1242e82ffdc64a9a3330f50155bb8f0fe45685..56f74bf70895ca701083bde44a5bbe0b691551e1 100644
--- a/drivers/usb/typec/hd3ss3220.c
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -16,10 +16,17 @@ 
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 
+#define HD3SS3220_REG_CN_STAT		0x08
 #define HD3SS3220_REG_CN_STAT_CTRL	0x09
 #define HD3SS3220_REG_GEN_CTRL		0x0A
 #define HD3SS3220_REG_DEV_REV		0xA0
 
+/* Register HD3SS3220_REG_CN_STAT */
+#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_MASK		(BIT(7) | BIT(6))
+#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_DEFAULT	0x00
+#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_MID		BIT(6)
+#define HD3SS3220_REG_CN_STAT_CURRENT_MODE_HIGH		BIT(7)
+
 /* Register HD3SS3220_REG_CN_STAT_CTRL*/
 #define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK	(BIT(7) | BIT(6))
 #define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP		BIT(6)
@@ -43,6 +50,31 @@  struct hd3ss3220 {
 	bool poll;
 };
 
+static int hd3ss3220_set_power_opmode(struct hd3ss3220 *hd3ss3220, int power_opmode)
+{
+	int current_mode;
+
+	switch (power_opmode) {
+	case TYPEC_PWR_MODE_USB:
+		current_mode = HD3SS3220_REG_CN_STAT_CURRENT_MODE_DEFAULT;
+		break;
+	case TYPEC_PWR_MODE_1_5A:
+		current_mode = HD3SS3220_REG_CN_STAT_CURRENT_MODE_MID;
+		break;
+	case TYPEC_PWR_MODE_3_0A:
+		current_mode = HD3SS3220_REG_CN_STAT_CURRENT_MODE_HIGH;
+		break;
+	case TYPEC_PWR_MODE_PD: /* Power delivery not supported */
+	default:
+		dev_err(hd3ss3220->dev, "bad power operation mode: %d\n", power_opmode);
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT,
+				  HD3SS3220_REG_CN_STAT_CURRENT_MODE_MASK,
+				  current_mode);
+}
+
 static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref)
 {
 	return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL,
@@ -162,6 +194,23 @@  static irqreturn_t hd3ss3220_irq_handler(int irq, void *data)
 	return hd3ss3220_irq(hd3ss3220);
 }
 
+static int hd3ss3220_configure_power_opmode(struct hd3ss3220 *hd3ss3220,
+					    struct fwnode_handle *connector)
+{
+	/*
+	 * Supported power operation mode can be configured through device tree
+	 */
+	const char *cap_str;
+	int ret, power_opmode;
+
+	ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
+	if (ret)
+		return 0;
+
+	power_opmode = typec_find_pwr_opmode(cap_str);
+	return hd3ss3220_set_power_opmode(hd3ss3220, power_opmode);
+}
+
 static const struct regmap_config config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -223,6 +272,10 @@  static int hd3ss3220_probe(struct i2c_client *client)
 		goto err_put_role;
 	}
 
+	ret = hd3ss3220_configure_power_opmode(hd3ss3220, connector);
+	if (ret < 0)
+		goto err_unreg_port;
+
 	hd3ss3220_set_role(hd3ss3220);
 	ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, &data);
 	if (ret < 0)