From patchwork Tue Nov 12 17:01:11 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 13872576 Received: from mail-wm1-f48.google.com (mail-wm1-f48.google.com [209.85.128.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 97DC72144B2 for ; Tue, 12 Nov 2024 17:01:36 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731430899; cv=none; b=Qy8Lm8sK2tPwsoy9HKi8Qiahk9X/MM0c9gSTLbgBdBZv+NqGUgMMmrA4DPYAYvwqsh1VfL5GTTyG2a56oAxbyQ0a9yTAFfoYrXRusJiPpm7dUPMrHqUlbM36jojl6Kv5456Tgx500UGdue82izkNWbyDEjd3c73TaN5JOpUzrfU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731430899; c=relaxed/simple; bh=gKsNo34eTR5e/XIJURjIoPFHu63ccJTygJajHjh9qjM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=LmLEOSdduKG0GQx14wyn9fUhAaS33zCCXHYKZm+WKr98CRKONlleueNhJusVAkaRFBIxfrIyQfuxyzeGgkTDus4/suLgjRLP4Yo3PQLkshtjS1f186EIPCWrQbwH4XGG9Y3djAgstksQml0fb3ZN7C2JbsyVudXeDg5CClmMKTw= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=xpBPuFY8; arc=none smtp.client-ip=209.85.128.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="xpBPuFY8" Received: by mail-wm1-f48.google.com with SMTP id 5b1f17b1804b1-4315e62afe0so56345695e9.1 for ; Tue, 12 Nov 2024 09:01:36 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1731430895; x=1732035695; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=eXDkw0UP+V48h7JGNE40mW0FZDmkOXY/pSkLl94urJs=; b=xpBPuFY84FSOrsnzwXYvCGue2E99SP/nX4fUUpwD+wEDKSBh9Hj1v3++oz44qlIHCz OExI3xBCcOZJvX2NjVvD6lxsKJbSIAt+nwL3GH8iA+Gjpq/A84imU+KySDIAVfOvq4Iv q74Wu43nvGt2y7BzZldQs3E7Y8h+QcgSsFhZ1kqaqfYHWO/XH5iINSVDgNC537mPXyb6 cAw+2DdG60uQ6TlESPf7hx17VxumkDrTGZe73P6Wfsl4mMHoVs9bJ5e0Yk//i43b2nbm j6DFFqa/q1KIlPF0z5hfyBRr893ooESwOZKc4DhjNsHTjejhol6gEnFufAWB7hp571C4 UzPw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1731430895; x=1732035695; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=eXDkw0UP+V48h7JGNE40mW0FZDmkOXY/pSkLl94urJs=; b=QXU3/LZUs8FcH/ZGtE7hWHmpcKXAG+FLPVEPOYUoru9/64aPH/vAwB2qOMl/p3Eaxt Am1IGp5Dx5E6GjIc9pD8rchDUsqt+hOugCySujSIFZK4eZ/7jJcob2lyRp5lYqkWYM+v ch0ZdXxfz47/FPtMleF4IvdidYHpATc4rhwEX/MyTYV3bT+yR56H5DUYql6Yz9FX+Kml z0gc+C3LQEk7Gee5ecaSP4moj0d1OsfMVGXA8QdtP4ging048wkk+uNzH/wPNiiT9Cqe gaKxfuLARfnJJeXGbrJe4fd3SmvNaVbVbnU8B9L8sYNDyZpSRBY0te8e+uqoZ7CG7We6 6fKg== X-Forwarded-Encrypted: i=1; AJvYcCXGFui+GQDzulCuwzR/cc7QsZyBFgy3oscFzK0QCyZ6YMOhYmBordRWCC7KbAer6qYXPjSSM3oEXAQ=@vger.kernel.org X-Gm-Message-State: AOJu0Yy3G/2vzQT8XxMjan36Kx2yJEc0Y5YR7TolrE197zYi7v5JXFm1 CSfxBOGCtIB0qBUyS+sjJgN90W8VY3zKAiszYlrhwqTAcdD8kZYJOo2NgBFTaSQ= X-Google-Smtp-Source: AGHT+IGij5t2IeXv+csfZ0WqpurW6iJlB4rzHX1GgmJ67JSvIVCySyeCLiNgQKS6a4phGfyJ78TlfQ== X-Received: by 2002:a05:600c:3115:b0:431:7ca6:57b1 with SMTP id 5b1f17b1804b1-432b751c564mr138659355e9.32.1731430894809; Tue, 12 Nov 2024 09:01:34 -0800 (PST) Received: from [127.0.1.1] ([82.76.168.176]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-432b053051fsm215018895e9.6.2024.11.12.09.01.33 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 12 Nov 2024 09:01:34 -0800 (PST) From: Abel Vesa Date: Tue, 12 Nov 2024 19:01:11 +0200 Subject: [PATCH v5 2/6] usb: typec: Add support for Parade PS8830 Type-C Retimer Precedence: bulk X-Mailing-List: linux-usb@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241112-x1e80100-ps8830-v5-2-4ad83af4d162@linaro.org> References: <20241112-x1e80100-ps8830-v5-0-4ad83af4d162@linaro.org> In-Reply-To: <20241112-x1e80100-ps8830-v5-0-4ad83af4d162@linaro.org> To: Heikki Krogerus , Greg Kroah-Hartman , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bjorn Andersson , Konrad Dybcio Cc: Rajendra Nayak , Sibi Sankar , Johan Hovold , Dmitry Baryshkov , Trilok Soni , Christophe JAILLET , linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Abel Vesa X-Mailer: b4 0.15-dev-dedf8 X-Developer-Signature: v=1; a=openpgp-sha256; l=14799; i=abel.vesa@linaro.org; h=from:subject:message-id; bh=gKsNo34eTR5e/XIJURjIoPFHu63ccJTygJajHjh9qjM=; b=owEBbQKS/ZANAwAKARtfRMkAlRVWAcsmYgBnM4njU93+dfG0llmx5rCI9W1ufwIytifrRYZJk xyUirlFEFSJAjMEAAEKAB0WIQRO8+4RTnqPKsqn0bgbX0TJAJUVVgUCZzOJ4wAKCRAbX0TJAJUV VjxqEACvgbL4bLq4QbMjp+08Wb5fjzG7s4YIFHcIJAnbX+2ymZOBiW89G3ECx7bfFa9hU3RRRMn Pi73X66fdOKhCA5ygRo/uFhvDAPyXtVEj8v9qvu2Qq180xorqRCwXDm4Sl8P2Xfb4QpyGYm97KN X9Odu8flB7hTBMK9vRaVmhBD0zOPRI1LRMwHYC8S4AJAKF5v6Pk8DUylvNVaVzWXRGn3J3NuC00 oR2Ovi2q210/S+mQSe4hVFH9u+g1VX5zdRVji5WqyQJWI0w+02MT7q5bM85Km5GAb8GhojWqUnV Jg8b+ockpynk2xafOUb1MfJ/xOMovFJ2FL1DYPoDdAwChywVZ0hicJyWqKL+YNPY5CBW558QUNl kjbpAYkzKYDEFVEYCRWQb9AXxgcqRx/0KhbkrTP6mktgsZnC+sn7Bqx591hlIx0fX3EmuvDXeDX 90FAKEXLLsOM8SY3AfHZOQ6eBP6ANuH1lf0ejGE4GbnkY0daYfb4y419MFcjEYJ/XVUYaWc7XLl OA+K4Ax1IT5+/gaMdyBocjZYz1RVbGN9Dzw22gwRNGaagc92zRa1t7CfoRPUXZRt+CVEoa4PqIe 6ZVKiEhGz5Ltdt0hNk/BFDovBiJTFu+Q2GedjxbzA7SrJYbOCV0LcOqjPbLbWx9Zmu7WLWM6Ovx 7JignuUhyhPixag== X-Developer-Key: i=abel.vesa@linaro.org; a=openpgp; fpr=6AFF162D57F4223A8770EF5AF7BF214136F41FAE The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer, controlled over I2C. It usually sits between a USB/DisplayPort PHY and the Type-C connector, and provides orientation and altmode handling. The boards that use this retimer are the ones featuring the Qualcomm Snapdragon X Elite SoCs. Add a driver with support for the following modes: - DisplayPort 4-lanes - DisplayPort 2-lanes + USB3 - USB3 There is another variant of this retimer which is called PS8833. It seems to be really similar to the PS8830, so future-proof this driver by naming it ps883x. Signed-off-by: Abel Vesa --- drivers/usb/typec/mux/Kconfig | 10 + drivers/usb/typec/mux/Makefile | 1 + drivers/usb/typec/mux/ps883x.c | 437 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 448 insertions(+) diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index 67381b4ef4f68f4a6e73f157365ee24d0ab7109a..6dd8f961b593261fde1d39b238b981966e463599 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -56,6 +56,16 @@ config TYPEC_MUX_NB7VPQ904M Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C redriver chip found on some devices with a Type-C port. +config TYPEC_MUX_PS883X + tristate "Parade PS883x Type-C retimer driver" + depends on I2C + depends on DRM || DRM=n + select DRM_AUX_BRIDGE if DRM_BRIDGE && OF + select REGMAP_I2C + help + Say Y or M if your system has a Parade PS883x Type-C retimer chip + found on some devices with a Type-C port. + config TYPEC_MUX_PTN36502 tristate "NXP PTN36502 Type-C redriver driver" depends on I2C diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile index 60879446da9365183567d3374a2fb7b5171fb3d7..b4f599eb5053b8f20e9a41409b0a2d9a03d850b6 100644 --- a/drivers/usb/typec/mux/Makefile +++ b/drivers/usb/typec/mux/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o +obj-$(CONFIG_TYPEC_MUX_PS883X) += ps883x.o obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o obj-$(CONFIG_TYPEC_MUX_TUSB1046) += tusb1046.o obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o diff --git a/drivers/usb/typec/mux/ps883x.c b/drivers/usb/typec/mux/ps883x.c new file mode 100644 index 0000000000000000000000000000000000000000..3650e5d124727d9b9833302092331bf7f6f7b003 --- /dev/null +++ b/drivers/usb/typec/mux/ps883x.c @@ -0,0 +1,437 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Parade ps883x usb retimer driver + * + * Copyright (C) 2024 Linaro Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_USB_PORT_CONN_STATUS_0 0x00 + +#define CONN_STATUS_0_CONNECTION_PRESENT BIT(0) +#define CONN_STATUS_0_ORIENTATION_REVERSED BIT(1) +#define CONN_STATUS_0_USB_3_1_CONNECTED BIT(5) + +#define REG_USB_PORT_CONN_STATUS_1 0x01 + +#define CONN_STATUS_1_DP_CONNECTED BIT(0) +#define CONN_STATUS_1_DP_SINK_REQUESTED BIT(1) +#define CONN_STATUS_1_DP_PIN_ASSIGNMENT_C_D BIT(2) +#define CONN_STATUS_1_DP_HPD_LEVEL BIT(7) + +#define REG_USB_PORT_CONN_STATUS_2 0x02 + +struct ps883x_retimer { + struct i2c_client *client; + struct gpio_desc *reset_gpio; + struct regmap *regmap; + struct typec_switch_dev *sw; + struct typec_retimer *retimer; + struct clk *xo_clk; + struct regulator *vdd_supply; + struct regulator *vdd33_supply; + struct regulator *vdd33_cap_supply; + struct regulator *vddat_supply; + struct regulator *vddar_supply; + struct regulator *vddio_supply; + + struct typec_switch *typec_switch; + struct typec_mux *typec_mux; + + struct mutex lock; /* protect non-concurrent retimer & switch */ + + enum typec_orientation orientation; + unsigned long mode; + unsigned int svid; +}; + +static void ps883x_configure(struct ps883x_retimer *retimer, int cfg0, + int cfg1, int cfg2) +{ + regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_0, cfg0); + regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_1, cfg1); + regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_2, cfg2); +} + +static int ps883x_set(struct ps883x_retimer *retimer) +{ + int cfg0 = CONN_STATUS_0_CONNECTION_PRESENT; + int cfg1 = 0x00; + int cfg2 = 0x00; + + if (retimer->orientation == TYPEC_ORIENTATION_NONE || + retimer->mode == TYPEC_STATE_SAFE) { + ps883x_configure(retimer, cfg0, cfg1, cfg2); + return 0; + } + + if (retimer->mode != TYPEC_STATE_USB && retimer->svid != USB_TYPEC_DP_SID) + return -EINVAL; + + if (retimer->orientation == TYPEC_ORIENTATION_REVERSE) + cfg0 |= CONN_STATUS_0_ORIENTATION_REVERSED; + + switch (retimer->mode) { + case TYPEC_STATE_USB: + cfg0 |= CONN_STATUS_0_USB_3_1_CONNECTED; + break; + + case TYPEC_DP_STATE_C: + cfg1 = CONN_STATUS_1_DP_CONNECTED | + CONN_STATUS_1_DP_SINK_REQUESTED | + CONN_STATUS_1_DP_PIN_ASSIGNMENT_C_D | + CONN_STATUS_1_DP_HPD_LEVEL; + break; + + case TYPEC_DP_STATE_D: + cfg0 |= CONN_STATUS_0_USB_3_1_CONNECTED; + cfg1 = CONN_STATUS_1_DP_CONNECTED | + CONN_STATUS_1_DP_SINK_REQUESTED | + CONN_STATUS_1_DP_PIN_ASSIGNMENT_C_D | + CONN_STATUS_1_DP_HPD_LEVEL; + break; + + case TYPEC_DP_STATE_E: + cfg1 = CONN_STATUS_1_DP_CONNECTED | + CONN_STATUS_1_DP_HPD_LEVEL; + break; + + default: + return -EOPNOTSUPP; + } + + ps883x_configure(retimer, cfg0, cfg1, cfg2); + + return 0; +} + +static int ps883x_sw_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct ps883x_retimer *retimer = typec_switch_get_drvdata(sw); + int ret = 0; + + ret = typec_switch_set(retimer->typec_switch, orientation); + if (ret) + return ret; + + mutex_lock(&retimer->lock); + + if (retimer->orientation != orientation) { + retimer->orientation = orientation; + + ret = ps883x_set(retimer); + } + + mutex_unlock(&retimer->lock); + + return ret; +} + +static int ps883x_retimer_set(struct typec_retimer *rtmr, + struct typec_retimer_state *state) +{ + struct ps883x_retimer *retimer = typec_retimer_get_drvdata(rtmr); + struct typec_mux_state mux_state; + int ret = 0; + + mutex_lock(&retimer->lock); + + if (state->mode != retimer->mode) { + retimer->mode = state->mode; + + if (state->alt) + retimer->svid = state->alt->svid; + else + retimer->svid = 0; // No SVID + + ret = ps883x_set(retimer); + } + + mutex_unlock(&retimer->lock); + + if (ret) + return ret; + + mux_state.alt = state->alt; + mux_state.data = state->data; + mux_state.mode = state->mode; + + return typec_mux_set(retimer->typec_mux, &mux_state); +} + +static int ps883x_enable_vregs(struct ps883x_retimer *retimer) +{ + struct device *dev = &retimer->client->dev; + int ret; + + ret = regulator_enable(retimer->vdd33_supply); + if (ret) { + dev_err(dev, "cannot enable VDD 3.3V regulator: %d\n", ret); + return ret; + } + + ret = regulator_enable(retimer->vdd33_cap_supply); + if (ret) { + dev_err(dev, "cannot enable VDD 3.3V CAP regulator: %d\n", ret); + goto err_vdd33_disable; + } + + usleep_range(4000, 10000); + + ret = regulator_enable(retimer->vdd_supply); + if (ret) { + dev_err(dev, "cannot enable VDD regulator: %d\n", ret); + goto err_vdd33_cap_disable; + } + + ret = regulator_enable(retimer->vddar_supply); + if (ret) { + dev_err(dev, "cannot enable VDD AR regulator: %d\n", ret); + goto err_vdd_disable; + } + + ret = regulator_enable(retimer->vddat_supply); + if (ret) { + dev_err(dev, "cannot enable VDD AT regulator: %d\n", ret); + goto err_vddar_disable; + } + + ret = regulator_enable(retimer->vddio_supply); + if (ret) { + dev_err(dev, "cannot enable VDD IO regulator: %d\n", ret); + goto err_vddat_disable; + } + + return 0; + +err_vddat_disable: + regulator_disable(retimer->vddat_supply); +err_vddar_disable: + regulator_disable(retimer->vddar_supply); +err_vdd_disable: + regulator_disable(retimer->vdd_supply); +err_vdd33_cap_disable: + regulator_disable(retimer->vdd33_cap_supply); +err_vdd33_disable: + regulator_disable(retimer->vdd33_supply); + + return ret; +} + +static void ps883x_disable_vregs(struct ps883x_retimer *retimer) +{ + regulator_disable(retimer->vddio_supply); + regulator_disable(retimer->vddat_supply); + regulator_disable(retimer->vddar_supply); + regulator_disable(retimer->vdd_supply); + regulator_disable(retimer->vdd33_cap_supply); + regulator_disable(retimer->vdd33_supply); +} + +static int ps883x_get_vregs(struct ps883x_retimer *retimer) +{ + struct device *dev = &retimer->client->dev; + + retimer->vdd_supply = devm_regulator_get(dev, "vdd"); + if (IS_ERR(retimer->vdd_supply)) + return dev_err_probe(dev, PTR_ERR(retimer->vdd_supply), + "failed to get VDD\n"); + + retimer->vdd33_supply = devm_regulator_get(dev, "vdd33"); + if (IS_ERR(retimer->vdd33_supply)) + return dev_err_probe(dev, PTR_ERR(retimer->vdd33_supply), + "failed to get VDD 3.3V\n"); + + retimer->vdd33_cap_supply = devm_regulator_get(dev, "vdd33-cap"); + if (IS_ERR(retimer->vdd33_cap_supply)) + return dev_err_probe(dev, PTR_ERR(retimer->vdd33_cap_supply), + "failed to get VDD CAP 3.3V\n"); + + retimer->vddat_supply = devm_regulator_get(dev, "vddat"); + if (IS_ERR(retimer->vddat_supply)) + return dev_err_probe(dev, PTR_ERR(retimer->vddat_supply), + "failed to get VDD AT\n"); + + retimer->vddar_supply = devm_regulator_get(dev, "vddar"); + if (IS_ERR(retimer->vddar_supply)) + return dev_err_probe(dev, PTR_ERR(retimer->vddar_supply), + "failed to get VDD AR\n"); + + retimer->vddio_supply = devm_regulator_get(dev, "vddio"); + if (IS_ERR(retimer->vddio_supply)) + return dev_err_probe(dev, PTR_ERR(retimer->vddio_supply), + "failed to get VDD IO\n"); + + return 0; +} + +static const struct regmap_config ps883x_retimer_regmap = { + .max_register = 0x1f, + .reg_bits = 8, + .val_bits = 8, +}; + +static int ps883x_retimer_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct typec_switch_desc sw_desc = { }; + struct typec_retimer_desc rtmr_desc = { }; + struct ps883x_retimer *retimer; + int ret; + + retimer = devm_kzalloc(dev, sizeof(*retimer), GFP_KERNEL); + if (!retimer) + return -ENOMEM; + + retimer->client = client; + + mutex_init(&retimer->lock); + + retimer->regmap = devm_regmap_init_i2c(client, &ps883x_retimer_regmap); + if (IS_ERR(retimer->regmap)) + return dev_err_probe(dev, PTR_ERR(retimer->regmap), + "failed to allocate register map\n"); + + ret = ps883x_get_vregs(retimer); + if (ret) + return ret; + + retimer->xo_clk = devm_clk_get(dev, NULL); + if (IS_ERR(retimer->xo_clk)) + return dev_err_probe(dev, PTR_ERR(retimer->xo_clk), + "failed to get xo clock\n"); + + retimer->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS); + if (IS_ERR(retimer->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(retimer->reset_gpio), + "failed to get reset gpio\n"); + + retimer->typec_switch = typec_switch_get(dev); + if (IS_ERR(retimer->typec_switch)) + return dev_err_probe(dev, PTR_ERR(retimer->typec_switch), + "failed to acquire orientation-switch\n"); + + retimer->typec_mux = typec_mux_get(dev); + if (IS_ERR(retimer->typec_mux)) { + ret = dev_err_probe(dev, PTR_ERR(retimer->typec_mux), + "failed to acquire mode-mux\n"); + goto err_switch_put; + } + + ret = drm_aux_bridge_register(dev); + if (ret) + goto err_mux_put; + + ret = ps883x_enable_vregs(retimer); + if (ret) + goto err_mux_put; + + ret = clk_prepare_enable(retimer->xo_clk); + if (ret) { + dev_err(dev, "failed to enable XO: %d\n", ret); + goto err_vregs_disable; + } + + sw_desc.drvdata = retimer; + sw_desc.fwnode = dev_fwnode(dev); + sw_desc.set = ps883x_sw_set; + + retimer->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(retimer->sw)) { + ret = dev_err_probe(dev, PTR_ERR(retimer->sw), + "failed to register typec switch\n"); + goto err_clk_disable; + } + + rtmr_desc.drvdata = retimer; + rtmr_desc.fwnode = dev_fwnode(dev); + rtmr_desc.set = ps883x_retimer_set; + + retimer->retimer = typec_retimer_register(dev, &rtmr_desc); + if (IS_ERR(retimer->retimer)) { + ret = dev_err_probe(dev, PTR_ERR(retimer->sw), + "failed to register typec retimer\n"); + goto err_switch_unregister; + } + + /* skip resetting if already configured */ + if (regmap_test_bits(retimer->regmap, REG_USB_PORT_CONN_STATUS_0, + CONN_STATUS_0_CONNECTION_PRESENT)) + return 0; + + gpiod_direction_output(retimer->reset_gpio, 1); + + /* VDD IO supply enable to reset release delay */ + usleep_range(4000, 14000); + + gpiod_set_value(retimer->reset_gpio, 0); + + /* firmware initialization delay */ + msleep(60); + + return 0; + +err_switch_unregister: + typec_switch_unregister(retimer->sw); +err_vregs_disable: + ps883x_disable_vregs(retimer); +err_clk_disable: + clk_disable_unprepare(retimer->xo_clk); +err_mux_put: + typec_mux_put(retimer->typec_mux); +err_switch_put: + typec_switch_put(retimer->typec_switch); + + return ret; +} + +static void ps883x_retimer_remove(struct i2c_client *client) +{ + struct ps883x_retimer *retimer = i2c_get_clientdata(client); + + typec_retimer_unregister(retimer->retimer); + typec_switch_unregister(retimer->sw); + + gpiod_set_value(retimer->reset_gpio, 1); + + clk_disable_unprepare(retimer->xo_clk); + + ps883x_disable_vregs(retimer); + + typec_mux_put(retimer->typec_mux); + typec_switch_put(retimer->typec_switch); +} + +static const struct of_device_id ps883x_retimer_of_table[] = { + { .compatible = "parade,ps8830" }, + { } +}; +MODULE_DEVICE_TABLE(of, ps883x_retimer_of_table); + +static struct i2c_driver ps883x_retimer_driver = { + .driver = { + .name = "ps883x_retimer", + .of_match_table = ps883x_retimer_of_table, + }, + .probe = ps883x_retimer_probe, + .remove = ps883x_retimer_remove, +}; + +module_i2c_driver(ps883x_retimer_driver); + +MODULE_DESCRIPTION("Parade ps883x Type-C Retimer driver"); +MODULE_LICENSE("GPL");