diff mbox series

[v2,01/15] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #renesas,sysc-signal-cells

Message ID 20241126092050.1825607-2-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State New
Headers show
Series Add initial USB support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Nov. 26, 2024, 9:20 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The RZ/G3S system controller (SYSC) has registers to control signals that
are routed to various IPs. These signals must be controlled during
configuration of the respective IPs. One such signal is the USB PWRRDY,
which connects the SYSC and the USB PHY. This signal must to be controlled
before and after the power to the USB PHY is turned off/on.

Other similar signals include the following (according to the RZ/G3S
hardware manual):

* PCIe:
- ALLOW_ENTER_L1 signal controlled through the SYS_PCIE_CFG register
- PCIE_RST_RSM_B signal controlled through the SYS_PCIE_RST_RSM_B
  register
- MODE_RXTERMINATION signal controlled through SYS_PCIE_PHY register

* SPI:
- SEL_SPI_OCTA signal controlled through SYS_IPCONT_SEL_SPI_OCTA
  register

* I2C/I3C:
- af_bypass I2C signals controlled through SYS_I2Cx_CFG registers
  (x=0..3)
- af_bypass I3C signal controlled through SYS_I3C_CFG register

* Ethernet:
- FEC_GIGA_ENABLE Ethernet signals controlled through SYS_GETHx_CFG
  registers (x=0..1)

Add #renesas,sysc-signal-cells DT property to allow different SYSC signals
consumers to manage these signals.

The goal is to enable consumers to specify the required access data for
these signals (through device tree) and let their respective drivers
control these signals via the syscon regmap provided by the system
controller driver. For example, the USB PHY will describe this relation
using the following DT property:

usb2_phy1: usb-phy@11e30200 {
	// ...
	renesas,sysc-signal = <&sysc 0xd70 0x1>;
	// ...
};

Along with it, add the syscon to the compatible list as it will be
requested by the consumer drivers. The syscon was added to the rest of
system controller variants as these are similar with RZ/G3S and can
benefit from the implementation proposed in this series.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- none; this patch is new


 .../soc/renesas/renesas,rzg2l-sysc.yaml       | 23 ++++++++++++++-----
 1 file changed, 17 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
index 4386b2c3fa4d..90f827e8de3e 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
@@ -19,11 +19,13 @@  description:
 
 properties:
   compatible:
-    enum:
-      - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five
-      - renesas,r9a07g044-sysc # RZ/G2{L,LC}
-      - renesas,r9a07g054-sysc # RZ/V2L
-      - renesas,r9a08g045-sysc # RZ/G3S
+    items:
+      - enum:
+          - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five
+          - renesas,r9a07g044-sysc # RZ/G2{L,LC}
+          - renesas,r9a07g054-sysc # RZ/V2L
+          - renesas,r9a08g045-sysc # RZ/G3S
+      - const: syscon
 
   reg:
     maxItems: 1
@@ -42,9 +44,17 @@  properties:
       - const: cm33stbyr_int
       - const: ca55_deny
 
+  "#renesas,sysc-signal-cells":
+    description:
+      The number of cells needed to configure a SYSC controlled signal. First
+      cell specifies the SYSC offset of the configuration register, second cell
+      specifies the bitmask in register.
+    const: 2
+
 required:
   - compatible
   - reg
+  - "#renesas,sysc-signal-cells"
 
 additionalProperties: false
 
@@ -53,7 +63,7 @@  examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     sysc: system-controller@11020000 {
-            compatible = "renesas,r9a07g044-sysc";
+            compatible = "renesas,r9a07g044-sysc", "syscon";
             reg = <0x11020000 0x10000>;
             interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
@@ -61,4 +71,5 @@  examples:
                          <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int",
                               "ca55_deny";
+            #renesas,sysc-signal-cells = <2>;
     };