@@ -2450,8 +2450,10 @@ static void process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
switch (trb_comp_code) {
case COMP_SUCCESS:
/* Don't overwrite status if TD had an error, see xHCI 4.9.1 */
- if (td->error_mid_td)
+ if (td->error_mid_td) {
+ td->error_mid_td = false;
break;
+ }
if (remaining) {
frame->status = short_framestatus;
sum_trbs_for_length = true;
@@ -2466,25 +2468,36 @@ static void process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
case COMP_BANDWIDTH_OVERRUN_ERROR:
frame->status = -ECOMM;
break;
+ case COMP_USB_TRANSACTION_ERROR:
case COMP_BABBLE_DETECTED_ERROR:
sum_trbs_for_length = true;
fallthrough;
case COMP_ISOCH_BUFFER_OVERRUN:
frame->status = -EOVERFLOW;
+ if (trb_comp_code == COMP_USB_TRANSACTION_ERROR)
+ frame->status = -EPROTO;
if (ep_trb != td->end_trb)
td->error_mid_td = true;
+ else
+ td->error_mid_td = false;
+
+ /*
+ * If an error is detected on the last TRB of the TD,
+ * wait for the final event.
+ */
+ if ((xhci->quirks & XHCI_ETRON_HOST) &&
+ td->urb->dev->speed >= USB_SPEED_SUPER &&
+ ep_trb == td->end_trb)
+ td->error_mid_td = true;
break;
case COMP_INCOMPATIBLE_DEVICE_ERROR:
case COMP_STALL_ERROR:
frame->status = -EPROTO;
break;
- case COMP_USB_TRANSACTION_ERROR:
- frame->status = -EPROTO;
- sum_trbs_for_length = true;
- if (ep_trb != td->end_trb)
- td->error_mid_td = true;
- break;
case COMP_STOPPED:
+ /* Think of it as the final event if TD had an error */
+ if (td->error_mid_td)
+ td->error_mid_td = false;
sum_trbs_for_length = true;
break;
case COMP_STOPPED_SHORT_PACKET:
@@ -2517,7 +2530,7 @@ static void process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
finish_td:
/* Don't give back TD yet if we encountered an error mid TD */
- if (td->error_mid_td && ep_trb != td->end_trb) {
+ if (td->error_mid_td) {
xhci_dbg(xhci, "Error mid isoc TD, wait for final completion event\n");
td->urb_length_set = true;
return;
Unplugging a USB3.0 webcam while streaming results in errors like this: [ 132.646387] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13 [ 132.646446] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8630 trb-start 000000002fdf8640 trb-end 000000002fdf8650 seg-start 000000002fdf8000 seg-end 000000002fdf8ff0 [ 132.646560] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13 [ 132.646568] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8660 trb-start 000000002fdf8670 trb-end 000000002fdf8670 seg-start 000000002fdf8000 seg-end 000000002fdf8ff0 If an error is detected while processing the last TRB of an isoc TD, the Etron xHC generates two transfer events for the TRB where the error was detected. The first event can be any sort of error (like USB Transaction or Babble Detected, etc), and the final event is Success. The xHCI driver will handle the TD after the first event and remove it from its internal list, and then print an "Transfer event TRB DMA ptr not part of current TD" error message after the final event. Commit 5372c65e1311 ("xhci: process isoc TD properly when there was a transaction error mid TD.") is designed to address isoc transaction errors, but unfortunately it doesn't account for this scenario. To work around this by reusing the logic that handles isoc transaction errors, but continuing to wait for the final event when this condition occurs. Sometimes we see the Stopped event after an error mid TD, this is a normal event for a pending TD and we can think of it as the final event we are waiting for. Check if the XHCI_ETRON_HOST quirk flag is set before invoking the workaround in process_isoc_td(). Fixes: 5372c65e1311 ("xhci: process isoc TD properly when there was a transaction error mid TD.") Cc: <stable@vger.kernel.org> Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com> --- drivers/usb/host/xhci-ring.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-)