Message ID | 20241210-s2r-cdns-v6-1-28a17f9715a2@bootlin.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Fix USB suspend on TI J7200 (cdns3-ti, cdns3, xhci) | expand |
On 10/12/2024 19:13, Théo Lebrun wrote: > The device probe function mixes management code and hardware > initialisation code. Extract the latter into an explicitly named > cdns_ti_reset_and_init_hw() function to clarify intent. It also will > allow easier transition to using runtime PM for triggering HW init. > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > --- > drivers/usb/cdns3/cdns3-ti.c | 84 ++++++++++++++++++++++++-------------------- > 1 file changed, 46 insertions(+), 38 deletions(-) > > diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c > index 040bb91e9c017d8298a7e251fd0e192a336e8a52..d704eb39820ad08a8774be7f00aa473c3ff267c0 100644 > --- a/drivers/usb/cdns3/cdns3-ti.c > +++ b/drivers/usb/cdns3/cdns3-ti.c > @@ -58,6 +58,7 @@ struct cdns_ti { > unsigned vbus_divider:1; > struct clk *usb2_refclk; > struct clk *lpm_clk; > + int usb2_refclk_rate_code; > }; > > static const int cdns_ti_rate_table[] = { /* in KHZ */ > @@ -98,15 +99,52 @@ static const struct of_dev_auxdata cdns_ti_auxdata[] = { > {}, > }; > > +static void cdns_ti_reset_and_init_hw(struct cdns_ti *data) > +{ > + u32 reg; > + > + /* assert RESET */ > + reg = cdns_ti_readl(data, USBSS_W1); > + reg &= ~USBSS_W1_PWRUP_RST; > + cdns_ti_writel(data, USBSS_W1, reg); > + > + /* set static config */ > + reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); > + reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK; > + reg |= data->usb2_refclk_rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT; > + > + reg &= ~USBSS1_STATIC_VBUS_SEL_MASK; > + new line not required? > + if (data->vbus_divider) > + reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT; > + > + cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg); > + reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); > + > + /* set USB2_ONLY mode if requested */ > + reg = cdns_ti_readl(data, USBSS_W1); > + here too? > + if (data->usb2_only) > + reg |= USBSS_W1_USB2_ONLY; > + > + /* set default modestrap */ > + reg |= USBSS_W1_MODESTRAP_SEL; > + reg &= ~USBSS_W1_MODESTRAP_MASK; > + reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT; > + cdns_ti_writel(data, USBSS_W1, reg); > + > + /* de-assert RESET */ > + reg |= USBSS_W1_PWRUP_RST; > + cdns_ti_writel(data, USBSS_W1, reg); > +} > + > static int cdns_ti_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct device_node *node = pdev->dev.of_node; > struct cdns_ti *data; > - int error; > - u32 reg; > - int rate_code, i; > unsigned long rate; > + int error, i; > > data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > if (!data) > @@ -146,7 +184,11 @@ static int cdns_ti_probe(struct platform_device *pdev) > return -EINVAL; > } > > - rate_code = i; > + data->usb2_refclk_rate_code = i; > + data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); > + data->usb2_only = device_property_read_bool(dev, "ti,usb2-only"); > + > + cdns_ti_reset_and_init_hw(data); > > pm_runtime_enable(dev); > error = pm_runtime_get_sync(dev); > @@ -155,40 +197,6 @@ static int cdns_ti_probe(struct platform_device *pdev) > goto err; > } > > - /* assert RESET */ > - reg = cdns_ti_readl(data, USBSS_W1); > - reg &= ~USBSS_W1_PWRUP_RST; > - cdns_ti_writel(data, USBSS_W1, reg); > - > - /* set static config */ > - reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); > - reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK; > - reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT; > - > - reg &= ~USBSS1_STATIC_VBUS_SEL_MASK; > - data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); > - if (data->vbus_divider) > - reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT; > - > - cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg); > - reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); > - > - /* set USB2_ONLY mode if requested */ > - reg = cdns_ti_readl(data, USBSS_W1); > - data->usb2_only = device_property_read_bool(dev, "ti,usb2-only"); > - if (data->usb2_only) > - reg |= USBSS_W1_USB2_ONLY; > - > - /* set default modestrap */ > - reg |= USBSS_W1_MODESTRAP_SEL; > - reg &= ~USBSS_W1_MODESTRAP_MASK; > - reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT; > - cdns_ti_writel(data, USBSS_W1, reg); > - > - /* de-assert RESET */ > - reg |= USBSS_W1_PWRUP_RST; > - cdns_ti_writel(data, USBSS_W1, reg); > - > error = of_platform_populate(node, NULL, cdns_ti_auxdata, dev); > if (error) { > dev_err(dev, "failed to create children: %d\n", error); > Reviewed-by: Roger Quadros <rogerq@kernel.org>
diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c index 040bb91e9c017d8298a7e251fd0e192a336e8a52..d704eb39820ad08a8774be7f00aa473c3ff267c0 100644 --- a/drivers/usb/cdns3/cdns3-ti.c +++ b/drivers/usb/cdns3/cdns3-ti.c @@ -58,6 +58,7 @@ struct cdns_ti { unsigned vbus_divider:1; struct clk *usb2_refclk; struct clk *lpm_clk; + int usb2_refclk_rate_code; }; static const int cdns_ti_rate_table[] = { /* in KHZ */ @@ -98,15 +99,52 @@ static const struct of_dev_auxdata cdns_ti_auxdata[] = { {}, }; +static void cdns_ti_reset_and_init_hw(struct cdns_ti *data) +{ + u32 reg; + + /* assert RESET */ + reg = cdns_ti_readl(data, USBSS_W1); + reg &= ~USBSS_W1_PWRUP_RST; + cdns_ti_writel(data, USBSS_W1, reg); + + /* set static config */ + reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); + reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK; + reg |= data->usb2_refclk_rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT; + + reg &= ~USBSS1_STATIC_VBUS_SEL_MASK; + + if (data->vbus_divider) + reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT; + + cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg); + reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); + + /* set USB2_ONLY mode if requested */ + reg = cdns_ti_readl(data, USBSS_W1); + + if (data->usb2_only) + reg |= USBSS_W1_USB2_ONLY; + + /* set default modestrap */ + reg |= USBSS_W1_MODESTRAP_SEL; + reg &= ~USBSS_W1_MODESTRAP_MASK; + reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT; + cdns_ti_writel(data, USBSS_W1, reg); + + /* de-assert RESET */ + reg |= USBSS_W1_PWRUP_RST; + cdns_ti_writel(data, USBSS_W1, reg); +} + static int cdns_ti_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; struct cdns_ti *data; - int error; - u32 reg; - int rate_code, i; unsigned long rate; + int error, i; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -146,7 +184,11 @@ static int cdns_ti_probe(struct platform_device *pdev) return -EINVAL; } - rate_code = i; + data->usb2_refclk_rate_code = i; + data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); + data->usb2_only = device_property_read_bool(dev, "ti,usb2-only"); + + cdns_ti_reset_and_init_hw(data); pm_runtime_enable(dev); error = pm_runtime_get_sync(dev); @@ -155,40 +197,6 @@ static int cdns_ti_probe(struct platform_device *pdev) goto err; } - /* assert RESET */ - reg = cdns_ti_readl(data, USBSS_W1); - reg &= ~USBSS_W1_PWRUP_RST; - cdns_ti_writel(data, USBSS_W1, reg); - - /* set static config */ - reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); - reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK; - reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT; - - reg &= ~USBSS1_STATIC_VBUS_SEL_MASK; - data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); - if (data->vbus_divider) - reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT; - - cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg); - reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG); - - /* set USB2_ONLY mode if requested */ - reg = cdns_ti_readl(data, USBSS_W1); - data->usb2_only = device_property_read_bool(dev, "ti,usb2-only"); - if (data->usb2_only) - reg |= USBSS_W1_USB2_ONLY; - - /* set default modestrap */ - reg |= USBSS_W1_MODESTRAP_SEL; - reg &= ~USBSS_W1_MODESTRAP_MASK; - reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT; - cdns_ti_writel(data, USBSS_W1, reg); - - /* de-assert RESET */ - reg |= USBSS_W1_PWRUP_RST; - cdns_ti_writel(data, USBSS_W1, reg); - error = of_platform_populate(node, NULL, cdns_ti_auxdata, dev); if (error) { dev_err(dev, "failed to create children: %d\n", error);
The device probe function mixes management code and hardware initialisation code. Extract the latter into an explicitly named cdns_ti_reset_and_init_hw() function to clarify intent. It also will allow easier transition to using runtime PM for triggering HW init. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> --- drivers/usb/cdns3/cdns3-ti.c | 84 ++++++++++++++++++++++++-------------------- 1 file changed, 46 insertions(+), 38 deletions(-)