diff mbox series

[v3,1/4] dt-bindings: usb: dwc3: Add a property to reserve endpoints

Message ID 20250212193116.2487289-2-andriy.shevchenko@linux.intel.com (mailing list archive)
State Accepted
Commit 8bc8a32a280410f68eae99e1ec623ac87586cb1f
Headers show
Series usb: dwc3: Avoid using reserved EPs | expand

Commit Message

Andy Shevchenko Feb. 12, 2025, 7:28 p.m. UTC 
Some of the endpoints may be reserved by hardware for different purposes,
e.g., tracing control and output. This is the case, for instance, on
Intel Merrifield and Moorefield platforms that reserve a few and USB driver
may not use them for the regular transfers. Add the respective bindings.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../devicetree/bindings/usb/snps,dwc3-common.yaml     | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
index c956053fd036..71249b6ba616 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
@@ -65,6 +65,17 @@  properties:
       mode.
     type: boolean
 
+  snps,reserved-endpoints:
+    description:
+      Reserve endpoints for other needs, e.g, for tracing control and output.
+      When set, the driver will avoid using them for the regular USB transfers.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 30
+    items:
+      minimum: 2
+      maximum: 31
+
   snps,dis-start-transfer-quirk:
     description:
       When set, disable isoc START TRANSFER command failure SW work-around