@@ -2721,6 +2721,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
rhdev->rx_lanes = 1;
rhdev->tx_lanes = 1;
+ rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN;
switch (hcd->speed) {
case HCD_USB11:
@@ -2738,8 +2739,11 @@ int usb_add_hcd(struct usb_hcd *hcd,
case HCD_USB32:
rhdev->rx_lanes = 2;
rhdev->tx_lanes = 2;
- fallthrough;
+ rhdev->ssp_rate = USB_SSP_GEN_2x2;
+ rhdev->speed = USB_SPEED_SUPER_PLUS;
+ break;
case HCD_USB31:
+ rhdev->ssp_rate = USB_SSP_GEN_2x1;
rhdev->speed = USB_SPEED_SUPER_PLUS;
break;
default:
@@ -31,6 +31,7 @@
#include <linux/pm_qos.h>
#include <linux/kobject.h>
+#include <linux/bitfield.h>
#include <linux/uaccess.h>
#include <asm/byteorder.h>
@@ -2668,6 +2669,81 @@ int usb_authorize_device(struct usb_device *usb_dev)
return result;
}
+/**
+ * get_port_ssp_rate - Match the extended port status to SSP rate
+ * @hdev: The hub device
+ * @ext_portstatus: extended port status
+ *
+ * Match the extended port status speed id to the SuperSpeed Plus sublink speed
+ * capability attributes. Base on the number of connected lanes and speed,
+ * return the corresponding enum usb_ssp_rate.
+ */
+static enum usb_ssp_rate get_port_ssp_rate(struct usb_device *hdev,
+ u32 ext_portstatus)
+{
+ struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap;
+ u32 attr;
+ u8 speed_id;
+ u8 ssac;
+ u8 lanes;
+ int i;
+
+ if (!ssp_cap)
+ goto out;
+
+ speed_id = ext_portstatus & USB_EXT_PORT_STAT_RX_SPEED_ID;
+ lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
+
+ ssac = le32_to_cpu(ssp_cap->bmAttributes) &
+ USB_SSP_SUBLINK_SPEED_ATTRIBS;
+
+ for (i = 0; i <= ssac; i++) {
+ u8 ssid;
+
+ attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]);
+ ssid = FIELD_GET(USB_SSP_SUBLINK_SPEED_SSID, attr);
+ if (speed_id == ssid) {
+ u16 mantissa;
+ u8 lse;
+ u8 type;
+
+ /*
+ * Note: currently asymmetric lane types are only
+ * applicable for SSIC operate in SuperSpeed protocol
+ */
+ type = FIELD_GET(USB_SSP_SUBLINK_SPEED_ST, attr);
+ if (type == USB_SSP_SUBLINK_SPEED_ST_ASYM_RX ||
+ type == USB_SSP_SUBLINK_SPEED_ST_ASYM_TX)
+ goto out;
+
+ if (FIELD_GET(USB_SSP_SUBLINK_SPEED_LP, attr) !=
+ USB_SSP_SUBLINK_SPEED_LP_SSP)
+ goto out;
+
+ lse = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSE, attr);
+ mantissa = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSM, attr);
+
+ /* Convert to Gbps */
+ for (; lse < USB_SSP_SUBLINK_SPEED_LSE_GBPS; lse++)
+ mantissa /= 1000;
+
+ if (mantissa >= 10 && lanes == 1)
+ return USB_SSP_GEN_2x1;
+
+ if (mantissa >= 10 && lanes == 2)
+ return USB_SSP_GEN_2x2;
+
+ if (mantissa >= 5 && lanes == 2)
+ return USB_SSP_GEN_1x2;
+
+ goto out;
+ }
+ }
+
+out:
+ return USB_SSP_GEN_UNKNOWN;
+}
+
/*
* Return 1 if port speed is SuperSpeedPlus, 0 otherwise
* check it from the link protocol field of the current speed ID attribute.
@@ -2850,9 +2926,11 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
/* extended portstatus Rx and Tx lane count are zero based */
udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1;
+ udev->ssp_rate = get_port_ssp_rate(hub->hdev, ext_portstatus);
} else {
udev->rx_lanes = 1;
udev->tx_lanes = 1;
+ udev->ssp_rate = USB_SSP_GEN_UNKNOWN;
}
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
@@ -560,6 +560,7 @@ struct usb3_lpm_parameters {
* @speed: device speed: high/full/low (or error)
* @rx_lanes: number of rx lanes in use, USB 3.2 adds dual-lane support
* @tx_lanes: number of tx lanes in use, USB 3.2 adds dual-lane support
+ * @ssp_rate: SuperSpeed Plus phy signaling rate and lane count
* @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
* @ttport: device port on that tt hub
* @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
@@ -636,6 +637,7 @@ struct usb_device {
enum usb_device_speed speed;
unsigned int rx_lanes;
unsigned int tx_lanes;
+ enum usb_ssp_rate ssp_rate;
struct usb_tt *tt;
int ttport;
Introduce ssp_rate field to usb_device structure to capture the connected SuperSpeed Plus signaling rate generation and lane count with the corresponding usb_ssp_rate enum. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> --- Changes in v2: - None drivers/usb/core/hcd.c | 6 +++- drivers/usb/core/hub.c | 78 ++++++++++++++++++++++++++++++++++++++++++ include/linux/usb.h | 2 ++ 3 files changed, 85 insertions(+), 1 deletion(-)