@@ -1181,15 +1181,11 @@ static int zr364xx_open(struct file *file)
return err;
}
-static void zr364xx_release(struct v4l2_device *v4l2_dev)
+static void zr364xx_board_uninit(struct zr364xx_camera *cam)
{
- struct zr364xx_camera *cam =
- container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev);
unsigned long i;
- v4l2_device_unregister(&cam->v4l2_dev);
-
- videobuf_mmap_free(&cam->vb_vidq);
+ zr364xx_stop_readpipe(cam);
/* release sys buffers */
for (i = 0; i < FRAMES; i++) {
@@ -1200,9 +1196,19 @@ static void zr364xx_release(struct v4l2_device *v4l2_dev)
cam->buffer.frame[i].lpvbits = NULL;
}
- v4l2_ctrl_handler_free(&cam->ctrl_handler);
/* release transfer buffer */
kfree(cam->pipe->transfer_buffer);
+}
+
+static void zr364xx_release(struct v4l2_device *v4l2_dev)
+{
+ struct zr364xx_camera *cam =
+ container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev);
+
+ videobuf_mmap_free(&cam->vb_vidq);
+ v4l2_ctrl_handler_free(&cam->ctrl_handler);
+ zr364xx_board_uninit(cam);
+ v4l2_device_unregister(&cam->v4l2_dev);
kfree(cam);
}
@@ -1376,11 +1382,14 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
/* start read pipe */
err = zr364xx_start_readpipe(cam);
if (err)
- goto err_free;
+ goto err_free_frames;
DBG(": board initialized\n");
return 0;
+err_free_frames:
+ for (i = 0; i < FRAMES; i++)
+ vfree(cam->buffer.frame[i].lpvbits);
err_free:
kfree(cam->pipe->transfer_buffer);
cam->pipe->transfer_buffer = NULL;
@@ -1409,12 +1418,10 @@ static int zr364xx_probe(struct usb_interface *intf,
if (!cam)
return -ENOMEM;
- cam->v4l2_dev.release = zr364xx_release;
err = v4l2_device_register(&intf->dev, &cam->v4l2_dev);
if (err < 0) {
dev_err(&udev->dev, "couldn't register v4l2_device\n");
- kfree(cam);
- return err;
+ goto free_cam;
}
hdl = &cam->ctrl_handler;
v4l2_ctrl_handler_init(hdl, 1);
@@ -1423,7 +1430,7 @@ static int zr364xx_probe(struct usb_interface *intf,
if (hdl->error) {
err = hdl->error;
dev_err(&udev->dev, "couldn't register control\n");
- goto fail;
+ goto unregister;
}
/* save the init method used by this camera */
cam->method = id->driver_info;
@@ -1496,7 +1503,7 @@ static int zr364xx_probe(struct usb_interface *intf,
if (!cam->read_endpoint) {
err = -ENOMEM;
dev_err(&intf->dev, "Could not find bulk-in endpoint\n");
- goto fail;
+ goto unregister;
}
/* v4l */
@@ -1507,10 +1514,11 @@ static int zr364xx_probe(struct usb_interface *intf,
/* load zr364xx board specific */
err = zr364xx_board_init(cam);
- if (!err)
- err = v4l2_ctrl_handler_setup(hdl);
if (err)
- goto fail;
+ goto unregister;
+ err = v4l2_ctrl_handler_setup(hdl);
+ if (err)
+ goto board_uninit;
spin_lock_init(&cam->slock);
@@ -1525,16 +1533,21 @@ static int zr364xx_probe(struct usb_interface *intf,
err = video_register_device(&cam->vdev, VFL_TYPE_VIDEO, -1);
if (err) {
dev_err(&udev->dev, "video_register_device failed\n");
- goto fail;
+ goto free_handler;
}
+ cam->v4l2_dev.release = zr364xx_release;
dev_info(&udev->dev, DRIVER_DESC " controlling device %s\n",
video_device_node_name(&cam->vdev));
return 0;
-fail:
+free_handler:
v4l2_ctrl_handler_free(hdl);
+board_uninit:
+ zr364xx_board_uninit(cam);
+unregister:
v4l2_device_unregister(&cam->v4l2_dev);
+free_cam:
kfree(cam);
return err;
}
Syzbot discovered that the probe error handling doesn't clean up the resources allocated in zr364xx_board_init(). There are several related bugs in this code so I have re-written the error handling. 1) Introduce a new function zr364xx_board_uninit() which cleans up the resources in zr364xx_board_init(). 2) In zr364xx_board_init() if the call to zr364xx_start_readpipe() fails then release the "cam->buffer.frame[i].lpvbits" memory before returning. This way every function either allocates everything successfully or it cleans up after itself. 3) Re-write the probe function so that each failure path goto frees the most recent allocation. That way we don't free anything before it has been allocated and we can also verify that everything is freed. 4) Originally, in the probe function the "cam->v4l2_dev.release" pointer was set to "zr364xx_release" near the start but I moved that assignment to the end, after everything had succeeded. The release function was never actually called during the probe cleanup process, but with this change I wanted to make it clear that we don't want to call zr364xx_release() until everything is allocated successfully. Next I re-wrote the zr364xx_release() function. Ideally this would have been a simple matter of copy and pasting the cleanup code from probe and adding an additional call to video_unregister_device(). But there are a couple quirks to note. 1) The probe function does not call videobuf_mmap_free() and I don't know where the videobuf_mmap is allocated. I left the code as-is to avoid introducing a bug in code I don't understand. 2) The zr364xx_board_uninit() has a call to zr364xx_stop_readpipe() which is a change from the original behavior with regards to unloading the driver. Calling zr364xx_stop_readpipe() on a stopped pipe is not a problem so this is safe and is potentially a bugfix. Reported-by: syzbot+b4d54814b339b5c6bbd4@syzkaller.appspotmail.com Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> --- v2: The first version introduced a double call of video_unregister_device() in the unload path. drivers/media/usb/zr364xx/zr364xx.c | 49 ++++++++++++++++++----------- 1 file changed, 31 insertions(+), 18 deletions(-)