| Message ID | d7049743924adf82f93ddfe403a5ebb9ac06e49b.1612410491.git.Thinh.Nguyen@synopsys.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | usb: Check for genXxY on host | expand |
On 4.2.2021 6.10, Thinh Nguyen wrote: > Check for usb_device->ssp_rate to print the SuperSpeed Plus signaling > rate generation and lane count. > > Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> > --- > Changes in v2: > - None > > drivers/usb/core/hub.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 823470607d58..6dc4e7385e75 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -4830,9 +4830,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, > "%s SuperSpeed%s%s USB device number %d using %s\n", > (udev->config) ? "reset" : "new", > (udev->speed == USB_SPEED_SUPER_PLUS) ? > - "Plus Gen 2" : " Gen 1", > - (udev->rx_lanes == 2 && udev->tx_lanes == 2) ? > - "x2" : "", > + " Plus" : "", > + (udev->ssp_rate == USB_SSP_GEN_2x2) ? > + " gen2x2" : > + (udev->ssp_rate == USB_SSP_GEN_2x1) ? > + " gen2x1" : > + (udev->ssp_rate == USB_SSP_GEN_1x2) ? > + " gen1x2" : "", Minor nit: Should we keep the "Gen XxY" format used in spec and driver, instead of this "genXxY" Thanks Mathias
Mathias Nyman wrote: > On 4.2.2021 6.10, Thinh Nguyen wrote: >> Check for usb_device->ssp_rate to print the SuperSpeed Plus signaling >> rate generation and lane count. >> >> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> >> --- >> Changes in v2: >> - None >> >> drivers/usb/core/hub.c | 10 +++++++--- >> 1 file changed, 7 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c >> index 823470607d58..6dc4e7385e75 100644 >> --- a/drivers/usb/core/hub.c >> +++ b/drivers/usb/core/hub.c >> @@ -4830,9 +4830,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, >> "%s SuperSpeed%s%s USB device number %d using %s\n", >> (udev->config) ? "reset" : "new", >> (udev->speed == USB_SPEED_SUPER_PLUS) ? >> - "Plus Gen 2" : " Gen 1", >> - (udev->rx_lanes == 2 && udev->tx_lanes == 2) ? >> - "x2" : "", >> + " Plus" : "", >> + (udev->ssp_rate == USB_SSP_GEN_2x2) ? >> + " gen2x2" : >> + (udev->ssp_rate == USB_SSP_GEN_2x1) ? >> + " gen2x1" : >> + (udev->ssp_rate == USB_SSP_GEN_1x2) ? >> + " gen1x2" : "", > Minor nit: > Should we keep the "Gen XxY" format used in spec and driver, instead of this "genXxY" > Ok. I've made the fix. Thanks, Thinh
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 823470607d58..6dc4e7385e75 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4830,9 +4830,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, "%s SuperSpeed%s%s USB device number %d using %s\n", (udev->config) ? "reset" : "new", (udev->speed == USB_SPEED_SUPER_PLUS) ? - "Plus Gen 2" : " Gen 1", - (udev->rx_lanes == 2 && udev->tx_lanes == 2) ? - "x2" : "", + " Plus" : "", + (udev->ssp_rate == USB_SSP_GEN_2x2) ? + " gen2x2" : + (udev->ssp_rate == USB_SSP_GEN_2x1) ? + " gen2x1" : + (udev->ssp_rate == USB_SSP_GEN_1x2) ? + " gen1x2" : "", devnum, driver_name); }
Check for usb_device->ssp_rate to print the SuperSpeed Plus signaling rate generation and lane count. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> --- Changes in v2: - None drivers/usb/core/hub.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)