Message ID | d93fc79f2fcc8da5166ccb99c5703ff3fdb46259.1695497666.git.mirq-linux@rere.qmqm.pl (mailing list archive) |
---|---|
State | Accepted |
Commit | 7ab8716713c931ac79988f2592e1cf8b2e4fec1b |
Headers | show |
Series | usb: chipidea: Tegra USB DMA fix + cleanups | expand |
On 23-09-23 21:41:55, Michał Mirosław wrote: > Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus > may write past the buffer provided. This is detected by SLUB: > > ============================================================================= > BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten > ----------------------------------------------------------------------------- > > 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc > Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 > __kmem_cache_alloc_node+0x12f/0x1e4 > __kmalloc+0x33/0x8c > usb_get_status+0x2b/0xac > hub_probe+0x5e9/0xcec > usb_probe_interface+0xbf/0x21c > really_probe+0xa5/0x2c4 > __driver_probe_device+0x75/0x174 > driver_probe_device+0x31/0x94 > __device_attach_driver+0x65/0xc0 > bus_for_each_drv+0x4b/0x74 > __device_attach+0x69/0x120 > bus_probe_device+0x65/0x6c > device_add+0x48b/0x5f8 > usb_set_configuration+0x37b/0x6b4 > usb_generic_driver_probe+0x37/0x68 > usb_probe_device+0x35/0xb4 > Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) > Object 0x8555cd00 @offset=3328 fp=0x00000000 > > Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555cd40: cc cc cc cc .... > Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ > CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 > Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) > Workqueue: usb_hub_wq hub_event > [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) > [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) > [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) > [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) > [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) > [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) > [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) > [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) > [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) > [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) > [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) > [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) > usb 1-1: device descriptor read/8, error -71 > > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > --- > drivers/usb/chipidea/host.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c > index 08af26b762a2..abddd39d1ff1 100644 > --- a/drivers/usb/chipidea/host.c > +++ b/drivers/usb/chipidea/host.c > @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) > const unsigned int ci_hdrc_usb_dma_align = 32; > size_t kmalloc_size; > > - if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 || > - !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1))) > + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0) > + return 0; > + if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3)) > return 0; > > /* Allocate a buffer with enough padding for alignment */ > - kmalloc_size = urb->transfer_buffer_length + > + kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) + > sizeof(struct ci_hdrc_dma_aligned_buffer) + > ci_hdrc_usb_dma_align - 1; > Would you please explain why you make these changes?
On Mon, Sep 25, 2023 at 07:45:22PM +0800, Peter Chen wrote: > On 23-09-23 21:41:55, Michał Mirosław wrote: > > Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus > > may write past the buffer provided. This is detected by SLUB: > > > > ============================================================================= > > BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten > > ----------------------------------------------------------------------------- > > > > 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc > > Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 > > __kmem_cache_alloc_node+0x12f/0x1e4 > > __kmalloc+0x33/0x8c > > usb_get_status+0x2b/0xac > > hub_probe+0x5e9/0xcec > > usb_probe_interface+0xbf/0x21c > > really_probe+0xa5/0x2c4 > > __driver_probe_device+0x75/0x174 > > driver_probe_device+0x31/0x94 > > __device_attach_driver+0x65/0xc0 > > bus_for_each_drv+0x4b/0x74 > > __device_attach+0x69/0x120 > > bus_probe_device+0x65/0x6c > > device_add+0x48b/0x5f8 > > usb_set_configuration+0x37b/0x6b4 > > usb_generic_driver_probe+0x37/0x68 > > usb_probe_device+0x35/0xb4 > > Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) > > Object 0x8555cd00 @offset=3328 fp=0x00000000 > > > > Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > Redzone 8555cd40: cc cc cc cc .... > > Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ > > CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 > > Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) > > Workqueue: usb_hub_wq hub_event > > [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) > > [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) > > [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) > > [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) > > [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) > > [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) > > [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) > > [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) > > [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) > > [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) > > [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) > > [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) > > usb 1-1: device descriptor read/8, error -71 > > > > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > > --- > > drivers/usb/chipidea/host.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c > > index 08af26b762a2..abddd39d1ff1 100644 > > --- a/drivers/usb/chipidea/host.c > > +++ b/drivers/usb/chipidea/host.c > > @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) > > const unsigned int ci_hdrc_usb_dma_align = 32; > > size_t kmalloc_size; > > > > - if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 || > > - !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1))) > > + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0) > > + return 0; > > + if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3)) > > return 0; > > > > /* Allocate a buffer with enough padding for alignment */ > > - kmalloc_size = urb->transfer_buffer_length + > > + kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) + > > sizeof(struct ci_hdrc_dma_aligned_buffer) + > > ci_hdrc_usb_dma_align - 1; > > > > Would you please explain why you make these changes? Can you point out what's unclear in the commit message? This is to fix a buffer overflow by DMA from the USB controller as it seems to write data 32-bit word at a time. What the patch does is extend the workaround code to account for the extra room needed at the tail of the buffer. Best Regards Michał Mirosław
On 23-09-26 01:53:39, Michał Mirosław wrote: > On Mon, Sep 25, 2023 at 07:45:22PM +0800, Peter Chen wrote: > > On 23-09-23 21:41:55, Michał Mirosław wrote: > > > Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus > > > may write past the buffer provided. This is detected by SLUB: > > > > > > ============================================================================= > > > BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten > > > ----------------------------------------------------------------------------- > > > > > > 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc > > > Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 > > > __kmem_cache_alloc_node+0x12f/0x1e4 > > > __kmalloc+0x33/0x8c > > > usb_get_status+0x2b/0xac > > > hub_probe+0x5e9/0xcec > > > usb_probe_interface+0xbf/0x21c > > > really_probe+0xa5/0x2c4 > > > __driver_probe_device+0x75/0x174 > > > driver_probe_device+0x31/0x94 > > > __device_attach_driver+0x65/0xc0 > > > bus_for_each_drv+0x4b/0x74 > > > __device_attach+0x69/0x120 > > > bus_probe_device+0x65/0x6c > > > device_add+0x48b/0x5f8 > > > usb_set_configuration+0x37b/0x6b4 > > > usb_generic_driver_probe+0x37/0x68 > > > usb_probe_device+0x35/0xb4 > > > Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) > > > Object 0x8555cd00 @offset=3328 fp=0x00000000 > > > > > > Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > > > Redzone 8555cd40: cc cc cc cc .... > > > Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ > > > CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 > > > Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) > > > Workqueue: usb_hub_wq hub_event > > > [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) > > > [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) > > > [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) > > > [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) > > > [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) > > > [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) > > > [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) > > > [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) > > > [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) > > > [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) > > > [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) > > > [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) > > > usb 1-1: device descriptor read/8, error -71 > > > > > > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") > > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > > > --- > > > drivers/usb/chipidea/host.c | 7 ++++--- > > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c > > > index 08af26b762a2..abddd39d1ff1 100644 > > > --- a/drivers/usb/chipidea/host.c > > > +++ b/drivers/usb/chipidea/host.c > > > @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) > > > const unsigned int ci_hdrc_usb_dma_align = 32; > > > size_t kmalloc_size; > > > > > > - if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 || > > > - !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1))) > > > + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0) > > > + return 0; > > > + if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3)) > > > return 0; > > > > > > /* Allocate a buffer with enough padding for alignment */ > > > - kmalloc_size = urb->transfer_buffer_length + > > > + kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) + > > > sizeof(struct ci_hdrc_dma_aligned_buffer) + > > > ci_hdrc_usb_dma_align - 1; > > > > > > > Would you please explain why you make these changes? > > Can you point out what's unclear in the commit message? You may appended below words to commit log, current commit log looks too simple. > This is to fix > a buffer overflow by DMA from the USB controller as it seems to write > data 32-bit word at a time. What the patch does is extend the workaround > code to account for the extra room needed at the tail of the buffer. > > Best Regards > Michał Mirosław
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 08af26b762a2..abddd39d1ff1 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) const unsigned int ci_hdrc_usb_dma_align = 32; size_t kmalloc_size; - if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 || - !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1))) + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0) + return 0; + if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3)) return 0; /* Allocate a buffer with enough padding for alignment */ - kmalloc_size = urb->transfer_buffer_length + + kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) + sizeof(struct ci_hdrc_dma_aligned_buffer) + ci_hdrc_usb_dma_align - 1;
Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus may write past the buffer provided. This is detected by SLUB: ============================================================================= BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten ----------------------------------------------------------------------------- 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 __kmem_cache_alloc_node+0x12f/0x1e4 __kmalloc+0x33/0x8c usb_get_status+0x2b/0xac hub_probe+0x5e9/0xcec usb_probe_interface+0xbf/0x21c really_probe+0xa5/0x2c4 __driver_probe_device+0x75/0x174 driver_probe_device+0x31/0x94 __device_attach_driver+0x65/0xc0 bus_for_each_drv+0x4b/0x74 __device_attach+0x69/0x120 bus_probe_device+0x65/0x6c device_add+0x48b/0x5f8 usb_set_configuration+0x37b/0x6b4 usb_generic_driver_probe+0x37/0x68 usb_probe_device+0x35/0xb4 Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) Object 0x8555cd00 @offset=3328 fp=0x00000000 Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555cd40: cc cc cc cc .... Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: usb_hub_wq hub_event [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) usb 1-1: device descriptor read/8, error -71 Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> --- drivers/usb/chipidea/host.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)