mbox series

[v4,00/11] Improve the MT8365 SoC and EVK board support

Message ID 20230203-evk-board-support-v4-0-5cffe66a38c0@baylibre.com (mailing list archive)
Headers show
Series Improve the MT8365 SoC and EVK board support | expand

Message

Alexandre Mergnat March 31, 2023, 5:54 p.m. UTC
This commits are based on the Fabien Parent <fparent@baylibre.com> work.

The purpose of this series is to add the following HWs / IPs support for
the mt8365-evk board:
- Watchdog
- Power Management Integrated Circuit "PMIC" wrapper
  - MT6357 PMIC
- MultiMediaCard "MMC" & Secure Digital "SD" controller
- USB controller
- Ethernet MAC controller

Add CPU Freq & IDLE support for this board.

This series depends to anothers which add support for MT8365 EVK board
[1] and the MT8365 I2C support [2]. Both are currently applied.

The DTB check may failed/warn about pinctrl binding, but it should be
fixed thanks to this serie [3]

Regards,
Alex

[1]: https://lore.kernel.org/all/20230309213501.794764-1-bero@baylibre.com/
[2]: https://lore.kernel.org/all/20221122-mt8365-i2c-support-v6-0-e1009c8afd53@baylibre.com/
[3]: https://lore.kernel.org/all/20230327-cleanup-pinctrl-binding-v2-0-f21fbcc3016e@baylibre.com/

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
Changes in v4:
- Remove v3 applied patch from the serie:
  - arm64: dts: mediatek: add ethernet support for mt8365 SoC
  - arm64: dts: mediatek: add mmc support for mt8365 SoC
  - arm64: dts: mediatek: add mt6357 device-tree
  - arm64: dts: mediatek: add pwrap support to mt8365 SoC
  - arm64: dts: mediatek: Increase the size BL31 reserved memory
- Drop "arm64: dts: mediatek: fix systimer properties" which is done [1]
- Fix style, typo and re-order properties.
- Use interrupts-extended for the PMIC node.
- Link to v3: https://lore.kernel.org/r/20230203-evk-board-support-v3-0-0003e80e0095@baylibre.com

Changes in v3:
- Remove v2 applied patch from the serie:
  - dt-bindings: mmc: mediatek,mtk-sd: add mt8365
- Add trailers and simply resend.
- Link to v2: https://lore.kernel.org/r/20230203-evk-board-support-v2-0-6ec7cdb10ccf@baylibre.com

---
Alexandre Mergnat (9):
      dt-bindings: watchdog: mediatek,mtk-wdt: add mt8365
      dt-bindings: pinctrl: mediatek,mt8365-pinctrl: add drive strength property
      arm64: dts: mediatek: add watchdog support for mt8365 SoC
      arm64: dts: mediatek: add mt6357 PMIC support for  mt8365-evk
      arm64: dts: mediatek: add mmc support for mt8365-evk
      arm64: dts: mediatek: add usb controller support for mt8365-evk
      arm64: dts: mediatek: add ethernet support for mt8365-evk
      arm64: dts: mediatek: add OPP support for mt8365 SoC
      arm64: dts: mediatek: add cpufreq support for mt8365-evk

Amjad Ouled-Ameur (1):
      arm64: dts: mediatek: Add CPU Idle support

Fabien Parent (1):
      arm64: dts: mediatek: set vmc regulator as always on

 .../bindings/pinctrl/mediatek,mt8365-pinctrl.yaml  |   3 +
 .../bindings/watchdog/mediatek,mtk-wdt.yaml        |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts        | 249 +++++++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi           | 142 ++++++++++++
 4 files changed, 395 insertions(+)
---
base-commit: 4f2a499a344b36ebb325e610265452ea88541116
change-id: 20230203-evk-board-support-d5b7a839ed7b

Best regards,

Comments

Kevin Hilman March 31, 2023, 6:29 p.m. UTC | #1
Alexandre Mergnat <amergnat@baylibre.com> writes:

> This commits are based on the Fabien Parent <fparent@baylibre.com> work.
>
> The purpose of this series is to add the following HWs / IPs support for
> the mt8365-evk board:
> - Watchdog
> - Power Management Integrated Circuit "PMIC" wrapper
>   - MT6357 PMIC
> - MultiMediaCard "MMC" & Secure Digital "SD" controller
> - USB controller
> - Ethernet MAC controller
>
> Add CPU Freq & IDLE support for this board.
>
> This series depends to anothers which add support for MT8365 EVK board
> [1] and the MT8365 I2C support [2]. Both are currently applied.
>
> The DTB check may failed/warn about pinctrl binding, but it should be
> fixed thanks to this serie [3]

It's not just the DTB check that that depends on the pinctrl binding
series.  Patch 2 of this series touches the pinctrl bindings, and does
not apply unless the pinctrl series is also applied.

IOW, I needed to apply [1], [2] and [3] to mainline in order to apply
this series.

After applying the dependencies, the kernel fails to build:

../arch/arm64/boot/dts/mediatek/mt8365-evk.dts:15:10: fatal error: mt6357.dtsi: No such file or directory
   15 | #include "mt6357.dtsi"
      |          ^~~~~~~~~~~~~
compilation terminated.                      

With lots of dependencies like this, it would be useful for you to push
a temporary branch on mainline where you've applied all the dependencies
so we can better see what the dependencies actually are.

Kevin
Alexandre Mergnat March 31, 2023, 6:45 p.m. UTC | #2
You forgot to apply the patches merged by Matthias:

Changes in v4:
- Remove v3 applied patch from the serie:
  - arm64: dts: mediatek: add ethernet support for mt8365 SoC
  - arm64: dts: mediatek: add mmc support for mt8365 SoC
  - arm64: dts: mediatek: add mt6357 device-tree
  - arm64: dts: mediatek: add pwrap support to mt8365 SoC
  - arm64: dts: mediatek: Increase the size BL31 reserved memory

...

Changes in v3:
- Remove v2 applied patch from the serie:
  - dt-bindings: mmc: mediatek,mtk-sd: add mt8365

Regards,
Alex
Alexandre Mergnat April 3, 2023, 9:02 a.m. UTC | #3
Here a build-able & working branch with dependencies:
https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support

Regards,
Alex

Le ven. 31 mars 2023 à 20:45, Alexandre Mergnat
<amergnat@baylibre.com> a écrit :
>
> You forgot to apply the patches merged by Matthias:
>
> Changes in v4:
> - Remove v3 applied patch from the serie:
>   - arm64: dts: mediatek: add ethernet support for mt8365 SoC
>   - arm64: dts: mediatek: add mmc support for mt8365 SoC
>   - arm64: dts: mediatek: add mt6357 device-tree
>   - arm64: dts: mediatek: add pwrap support to mt8365 SoC
>   - arm64: dts: mediatek: Increase the size BL31 reserved memory
>
> ...
>
> Changes in v3:
> - Remove v2 applied patch from the serie:
>   - dt-bindings: mmc: mediatek,mtk-sd: add mt8365
>
> Regards,
> Alex
Kevin Hilman April 4, 2023, 12:04 a.m. UTC | #4
Alexandre Mergnat <amergnat@baylibre.com> writes:

> You forgot to apply the patches merged by Matthias:

Because they weren't listed as dependencies. :)

Kevin

> Changes in v4:
> - Remove v3 applied patch from the serie:
>   - arm64: dts: mediatek: add ethernet support for mt8365 SoC
>   - arm64: dts: mediatek: add mmc support for mt8365 SoC
>   - arm64: dts: mediatek: add mt6357 device-tree
>   - arm64: dts: mediatek: add pwrap support to mt8365 SoC
>   - arm64: dts: mediatek: Increase the size BL31 reserved memory
>
> ...
>
> Changes in v3:
> - Remove v2 applied patch from the serie:
>   - dt-bindings: mmc: mediatek,mtk-sd: add mt8365
>
> Regards,
> Alex
Kevin Hilman April 4, 2023, 12:05 a.m. UTC | #5
Alexandre Mergnat <amergnat@baylibre.com> writes:

> Here a build-able & working branch with dependencies:
> https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support

This branch doesn't compile.

Kevin
Kevin Hilman April 4, 2023, 2:58 p.m. UTC | #6
Kevin Hilman <khilman@baylibre.com> writes:

> Alexandre Mergnat <amergnat@baylibre.com> writes:
>
>> Here a build-able & working branch with dependencies:
>> https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support
>
> This branch doesn't compile.

I'm wrong, it compiles fine.  I was on the wrong branch.

Sorry for the noise,

Kevin
Kevin Hilman April 4, 2023, 8:31 p.m. UTC | #7
Alexandre Mergnat <amergnat@baylibre.com> writes:

> Here a build-able & working branch with dependencies:
> https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support

Thanks for a branch with all the dependencies.

This branch builds & boots, but crashes because in the upstream default
defconfig, the CPUfreq driver is built-in and the regulator that it
depends on is not enabled.

Changing CPUfreq to be modular with CONFIG_ARM_MEDIATEK_CPUFREQ=m
allowed me to boot to a shell on mt8365-evk.

This suggests that this series needs some defconfig patches to enable
the new features, preferably as modules.

It's probably OK that the defconfig patch(es) come as a separate series,
but not sure what Matthias' preferences are here.

Kevin