| Message ID | 20230728102223.265216-1-varshini.rajendran@microchip.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for sam9x7 SoC family | expand |
On 28/07/2023 12:22, Varshini Rajendran wrote: > This patch series adds support for the new SoC family - sam9x7. > - The device tree, configs and drivers are added > - Clock driver for sam9x7 is added > - Support for basic peripherals is added > - Target board SAM9X75 Curiosity is added > Your threading is absolutely broken making it difficult to review and apply. Best regards, Krzysztof
On 28/07/2023 12:22, Varshini Rajendran wrote: > This patch series adds support for the new SoC family - sam9x7. > - The device tree, configs and drivers are added > - Clock driver for sam9x7 is added > - Support for basic peripherals is added > - Target board SAM9X75 Curiosity is added > > Changes in v3: > -------------- > > - Fixed the DT documentation errors pointed out in v2. That's too generic. What changed? Best regards, Krzysztof
On Fri, Jul 28, 2023 at 4:23 AM Varshini Rajendran <varshini.rajendran@microchip.com> wrote: > > This patch series adds support for the new SoC family - sam9x7. > - The device tree, configs and drivers are added > - Clock driver for sam9x7 is added > - Support for basic peripherals is added > - Target board SAM9X75 Curiosity is added > > Changes in v3: > -------------- > > - Fixed the DT documentation errors pointed out in v2. > - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted > according to sam9x7 correctly. > - Picked by the previously missed tags. > - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names > property" as the warning was not found while validating DT-schema for > at91-sam9x75_curiosity.dtb. > - Dropped redundant words in the commit message. > - Fixed the CHECK_DTBS warnings validated against > at91-sam9x75_curiosity.dtb. > - Renamed dt nodes according to naming convention. > - Dropped unwanted status property in dts. > - Removed nodes that are not in use from the board dts. > - Removed spi DT doc patch from the series as it was already applied > and a fix patch was applied subsequently. Added a patch to remove the > compatible to adapt sam9x7. > - Added sam9x7 compatibles in usb dt documentation. > > > Changes in v2: > -------------- > > - Added sam9x7 specific compatibles in DT with fallbacks > - Documented all the newly added DT compatible strings > - Added device tree for the target board sam9x75 curiosity and > documented the same in the DT bindings documentation > - Removed the dt nodes that are not supported at the moment > - Removed the configs added by previous version that are not supported > at the moment > - Fixed all the corrections in the commit message > - Changed all the instances of copyright year to 2023 > - Added sam9x7 flag in PIT64B configuration > - Moved macro definitions to header file > - Added another divider in mck characteristics in the pmc driver > - Fixed the memory leak in the pmc driver > - Dropped patches that are no longer needed > - Picked up Acked-by and Reviewed-by tags > > > Hari Prasath (1): > irqchip/atmel-aic5: Add support for sam9x7 aic > > Varshini Rajendran (49): > dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7 > compatible > dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible > dt-bindings: net: cdns,macb: add sam9x7 ethernet interface > dt-bindings: clk: at91: add sam9x7 > dt-bindings: clk: at91: add sam9x7 clock controller > dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 > dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 > dt-bindings: atmel-sysreg: add sam9x7 > dt-bindings: crypto: add sam9x7 in Atmel AES > dt-bindings: crypto: add sam9x7 in Atmel SHA > dt-bindings: crypto: add sam9x7 in Atmel TDES > dt-bindings: dmaengine: at_xdmac: add compatible with microchip,sam9x7 > dt-bindings: i2c: at91: Add sam9x7 compatible string > dt-bindings: mfd: at91: Add SAM9X7 compatible string > dt-bindings: atmel-gpbr: add microchip,sam9x7-gpbr > dt-bindings: atmel-matrix: add microchip,sam9x7-matrix > dt-bindings: atmel-smc: add microchip,sam9x7-smc > dt-bindings: atmel-ssc: add microchip,sam9x7-ssc > dt-bindings: sdhci-of-at91: add microchip,sam9x7-sdhci > dt-bindings: atmel-nand: add microchip,sam9x7-pmecc > dt-bindings: pinctrl: at91: add sam9x7 > dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG > dt-bindings: rtc: at91rm9200: add sam9x7 compatible > dt-bindings: rtt: at91rm9260: add sam9x7 compatible > dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7 > dt-bindings: atmel-classd: add sam9x7 compatible > dt-bindings: usb: atmel: add sam9x7 > dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt > dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic > spi: dt-bindings: atmel,at91rm9200-spi: remove 9x60 compatible from > list > ASoC: dt-bindings: microchip: add sam9x7 > dt-bindings: usb: ehci: Add sam9x7 > dt-bindings: usb: add sam9x7 > ARM: at91: pm: add support for sam9x7 SoC family > ARM: at91: pm: add sam9x7 SoC init config > ARM: at91: add support in SoC driver for new sam9x7 > clk: at91: clk-sam9x60-pll: re-factor to support individual core freq > outputs > clk: at91: sam9x7: add support for HW PLL freq dividers > clk: at91: sama7g5: move mux table macros to header file > clk: at91: sam9x7: Allow PLLs to be exported and referenced in DT > clk: at91: sam9x7: add sam9x7 pmc driver > power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 > power: reset: at91-reset: add reset support for sam9x7 SoC > power: reset: at91-reset: add sdhwc support for sam9x7 SoC > ARM: at91: Kconfig: add config flag for SAM9X7 SoC > ARM: configs: at91: enable config flags for sam9x7 SoC family > ARM: dts: at91: sam9x7: add device tree for SoC > dt-bindings: arm: add sam9x75 curiosity board > ARM: dts: at91: sam9x75_curiosity: add sam9x75 curiosity board > > .../devicetree/bindings/arm/atmel-sysregs.txt | 7 +- > .../devicetree/bindings/dma/atmel-xdma.txt | 3 +- > .../interrupt-controller/atmel,aic.txt | 2 +- > .../devicetree/bindings/mfd/atmel-flexcom.txt | 1 + > .../devicetree/bindings/mfd/atmel-gpbr.txt | 1 + > .../devicetree/bindings/mfd/atmel-matrix.txt | 1 + > .../devicetree/bindings/mfd/atmel-smc.txt | 1 + > .../devicetree/bindings/misc/atmel-ssc.txt | 1 + > .../devicetree/bindings/mmc/sdhci-atmel.txt | 4 +- > .../devicetree/bindings/mtd/atmel-nand.txt | 1 + > .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 + > .../devicetree/bindings/usb/atmel-usb.txt | 11 +- Still quite a few .txt bindings. When are Microchip folks going to get around to converting the rest of their bindings to schema? Be warned that at some point we will simply not accept any .txt binding changes. > .../dts/microchip/at91-sam9x75_curiosity.dts | 311 +++++ > arch/arm/boot/dts/microchip/sam9x7.dtsi | 1238 +++++++++++++++++ Don't you want to do that before adding new chips so warnings can be fixed up front? Overall, the Atmel/Microchip stuff is not in great shape. 1368 unique warnings and 189 undocumented (by schema) compatibles. Note lots of OHCI/EHCI related warnings already. I'm sure you didn't add more with this new chip, right? (All this data is available here: https://gitlab.com/robherring/linux-dt/-/jobs ) arch/arm/boot/dts/microchip:4655:1368 71 nand-controller: #size-cells:0:0: 0 was expected 71 nand-controller: #address-cells:0:0: 1 was expected 53 /: compatible: 'oneOf' conditional failed, one must be fixed: 49 serial@200: $nodename:0: 'serial@200' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$' 39 pinctrl@fffff400: $nodename:0: 'pinctrl@fffff400' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' 31 ohci@600000: compatible: 'oneOf' conditional failed, one must be fixed: 31 ohci@600000: $nodename:0: 'ohci@600000' does not match '^usb(@.*)?' 31 ehci@700000: compatible: 'oneOf' conditional failed, one must be fixed: 31 ehci@700000: $nodename:0: 'ehci@700000' does not match '^usb(@.*)?' 27 ehci@700000: Unevaluated properties are not allowed ('clock-names' was unexpected) 25 serial@200: atmel,fifo-size: False schema does not allow [[32]] 24 serial@200: atmel,use-dma-tx: False schema does not allow True 24 serial@200: atmel,use-dma-rx: False schema does not allow True 24 serial@200: atmel,fifo-size: False schema does not allow [[16]] 24 ohci@500000: compatible: 'oneOf' conditional failed, one must be fixed: 24 ohci@500000: $nodename:0: 'ohci@500000' does not match '^usb(@.*)?' 20 pinctrl@fffff200: $nodename:0: 'pinctrl@fffff200' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' 18 pinctrl@fffff400: tcb0: {'tcb0_tclk0-0': {'atmel,pins': [[0, 25, 1, 0]]}, 'tcb0_tclk1-0': {'atmel,pins': [[1, 6, 2, 0]]}, 'tcb0_tclk2-0': {'atmel,pins': [[1, 7, 2, 0]]}, 'tcb0_tioa0-0': {'atmel,pins': [[0, 26, 1, 0]]}, 'tcb0_tioa1-0': {'atmel,pins': [[0, 27, 1, 0]]}, 'tcb0_tioa2-0': {'atmel,pins': [[0, 28, 1, 0]]}, 'tcb0_tiob0-0': {'atmel,pins': [[2, 9, 2, 0]]}, 'tcb0_tiob1-0': {'atmel,pins': [[2, 7, 1, 0]]}, 'tcb0_tiob2-0': {'atmel,pins': [[2, 6, 1, 0]]}} should not be valid under {'type': 'object'} 17 pinctrl@fffff400: tcb1: {'tcb1_tclk0-0': {'atmel,pins': [[1, 16, 2, 0]]}, 'tcb1_tclk1-0': {'atmel,pins': [[1, 17, 2, 0]]}, 'tcb1_tclk2-0': {'atmel,pins': [[2, 22, 2, 0]]}, 'tcb1_tioa0-0': {'atmel,pins': [[1, 0, 2, 0]]}, 'tcb1_tioa1-0': {'atmel,pins': [[1, 2, 2, 0]]}, 'tcb1_tioa2-0': {'atmel,pins': [[1, 3, 2, 0]]}, 'tcb1_tiob0-0': {'atmel,pins': [[1, 1, 2, 0]]}, 'tcb1_tiob1-0': {'atmel,pins': [[1, 18, 2, 0]]}, 'tcb1_tiob2-0': {'atmel,pins': [[1, 19, 2, 0]]}} should not be valid under {'type': 'object'} 17 pinctrl@fffff400: dbgu: {'dbgu-0': {'atmel,pins': [[1, 14, 1, 1, 1, 15, 1, 0]], 'phandle': [[5]]}} should not be valid under {'type': 'object'} 17 ohci@600000: Unevaluated properties are not allowed ('atmel,vbus-gpio', 'clock-names', 'compatible' were unexpected) 17 i2c-gpio-0: 'sda-gpios' is a required property 17 i2c-gpio-0: 'scl-gpios' is a required property 16 ohci@500000: Unevaluated properties are not allowed ('clock-names', 'compatible' were unexpected) 15 pinctrl@fffff400: tcb1: {'tcb1_tclk0-0': {'atmel,pins': [[2, 4, 3, 0]]}, 'tcb1_tclk1-0': {'atmel,pins': [[2, 7, 3, 0]]}, 'tcb1_tclk2-0': {'atmel,pins': [[2, 14, 3, 0]]}, 'tcb1_tioa0-0': {'atmel,pins': [[2, 2, 3, 0]]}, 'tcb1_tioa1-0': {'atmel,pins': [[2, 5, 3, 0]]}, 'tcb1_tioa2-0': {'atmel,pins': [[2, 12, 3, 0]]}, 'tcb1_tiob0-0': {'atmel,pins': [[2, 3, 3, 0]]}, 'tcb1_tiob1-0': {'atmel,pins': [[2, 6, 3, 0]]}, 'tcb1_tiob2-0': {'atmel,pins': [[2, 13, 3, 0]]}} should not be valid under {'type': 'object'} 15 pinctrl@fffff400: tcb0: {'tcb0_tclk0-0': {'atmel,pins': [[0, 24, 1, 0]]}, 'tcb0_tclk1-0': {'atmel,pins': [[0, 25, 1, 0]]}, 'tcb0_tclk2-0': {'atmel,pins': [[0, 26, 1, 0]]}, 'tcb0_tioa0-0': {'atmel,pins': [[0, 21, 1, 0]]}, 'tcb0_tioa1-0': {'atmel,pins': [[0, 22, 1, 0]]}, 'tcb0_tioa2-0': {'atmel,pins': [[0, 23, 1, 0]]}, 'tcb0_tiob0-0': {'atmel,pins': [[0, 27, 1, 0]]}, 'tcb0_tiob1-0': {'atmel,pins': [[0, 28, 1, 0]]}, 'tcb0_tiob2-0': {'atmel,pins': [[0, 29, 1, 0]]}} should not be valid under {'type': 'object'} 14 pinctrl@fffff400: ssc0: {'ssc0_tx-0': {'atmel,pins': [[0, 24, 2, 0, 0, 25, 2, 0, 0, 26, 2, 0]], 'phandle': [[7]]}, 'ssc0_rx-0': {'atmel,pins': [[0, 27, 2, 0, 0, 28, 2, 0, 0, 29, 2, 0]], 'phandle': [[8]]}} should not be valid under {'type': 'object'} 13 pinctrl@fffff200: nand0: {'nand0_ale_cle-0': {'atmel,pins': [[4, 21, 1, 1, 4, 22, 1, 1]]}} should not be valid under {'type': 'object'} 11 pinctrl@fffff400: mmc0: {'mmc0_clk-0': {'atmel,pins': [[0, 8, 1, 0]]}, 'mmc0_slot0_cmd_dat0-0': {'atmel,pins': [[0, 7, 1, 1, 0, 6, 1, 1]]}, 'mmc0_slot0_dat1_3-0': {'atmel,pins': [[0, 9, 1, 1, 0, 10, 1, 1, 0, 11, 1, 1]]}, 'mmc0_slot1_cmd_dat0-0': {'atmel,pins': [[0, 1, 2, 1, 0, 0, 2, 1]]}, 'mmc0_slot1_dat1_3-0': {'atmel,pins': [[0, 5, 2, 1, 0, 4, 2, 1, 0, 3, 2, 1]]}} should not be valid under {'type': 'object'} 11 pinctrl@fffff200: pwm0: {'pwm0_pwmh0-0': {'atmel,pins': [[0, 20, 2, 0]]}, 'pwm0_pwmh0-1': {'atmel,pins': [[1, 0, 2, 0]]}, 'pwm0_pwml0-0': {'atmel,pins': [[0, 21, 2, 0]]}, 'pwm0_pwml0-1': {'atmel,pins': [[1, 1, 2, 0]]}, 'pwm0_pwmh1-0': {'atmel,pins': [[0, 22, 2, 0]]}, 'pwm0_pwmh1-1': {'atmel,pins': [[1, 4, 2, 0]]}, 'pwm0_pwmh1-2': {'atmel,pins': [[1, 27, 3, 0]]}, 'pwm0_pwml1-0': {'atmel,pins': [[0, 23, 2, 0]]}, 'pwm0_pwml1-1': {'atmel,pins': [[1, 5, 2, 0]]}, 'pwm0_pwml1-2': {'atmel,pins': [[4, 31, 2, 0]]}, 'pwm0_pwmh2-0': {'atmel,pins': [[1, 8, 2, 0]]}, 'pwm0_pwmh2-1': {'atmel,pins': [[3, 5, 3, 0]]}, 'pwm0_pwml2-0': {'atmel,pins': [[1, 9, 2, 0]]}, 'pwm0_pwml2-1': {'atmel,pins': [[3, 6, 3, 0]]}, 'pwm0_pwmh3-0': {'atmel,pins': [[1, 12, 2, 0]]}, 'pwm0_pwmh3-1': {'atmel,pins': [[3, 7, 3, 0]]}, 'pwm0_pwml3-0': {'atmel,pins': [[1, 13, 2, 0]]}, 'pwm0_pwml3-1': {'atmel,pins': [[3, 8, 3, 0]]}} should not be valid under {'type': 'object'} arch/arm/boot/dts/microchip:189 ['acme,ariag25', 'atmel,at91sam9x5ek', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['acme,ariettag25', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['acme,foxg20', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['aries,ma5d4evk', 'denx,ma5d4evk', 'atmel,sama5d4', 'atmel,sama5'] ['atheros,ath6kl'] ['atmel,asoc-wm8904'] ['atmel,at45', 'atmel,dataflash'] ['atmel,at91rm9200-aic'] ['atmel,at91rm9200-gpio'] ['atmel,at91rm9200-nand'] ['atmel,at91rm9200-ohci', 'usb-ohci'] ['atmel,at91rm9200-pinctrl', 'simple-bus'] ['atmel,at91rm9200-sdramc', 'syscon'] ['atmel,at91rm9200-ssc'] ['atmel,at91rm9200-st', 'syscon', 'simple-mfd'] ['atmel,at91rm9200-udc'] ['atmel,at91rm9200-wdt'] ['atmel,at91rm9200ek', 'atmel,at91rm9200'] ['atmel,at91sam9260-ebi'] ['atmel,at91sam9260-gpbr', 'syscon'] ['atmel,at91sam9260-matrix', 'syscon'] ['atmel,at91sam9260-nand-controller'] ['atmel,at91sam9260-pit'] ['atmel,at91sam9260-sdramc'] ['atmel,at91sam9260-smc', 'syscon'] ['atmel,at91sam9260-udc'] ['atmel,at91sam9260ek', 'atmel,at91sam9260', 'atmel,at91sam9'] ['atmel,at91sam9261-ebi'] ['atmel,at91sam9261-lcdc'] ['atmel,at91sam9261-matrix', 'syscon'] ['atmel,at91sam9261-nand-controller'] ['atmel,at91sam9261-pmc', 'syscon'] ['atmel,at91sam9261-udc'] ['atmel,at91sam9261ek', 'atmel,at91sam9261', 'atmel,at91sam9'] ['atmel,at91sam9263-ac97c'] ['atmel,at91sam9263-can'] ['atmel,at91sam9263-ebi0'] ['atmel,at91sam9263-ebi1'] ['atmel,at91sam9263-lcdc'] ['atmel,at91sam9263-matrix', 'syscon'] ['atmel,at91sam9263-pmc', 'syscon'] ['atmel,at91sam9263-udc'] ['atmel,at91sam9263ek', 'atmel,at91sam9263', 'atmel,at91sam9'] ['atmel,at91sam9g15ek', 'atmel,at91sam9x5ek', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['atmel,at91sam9g20ek', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['atmel,at91sam9g20ek-wm8731-audio'] ['atmel,at91sam9g20ek_2mmc', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['atmel,at91sam9g25ek', 'atmel,at91sam9x5ek', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['atmel,at91sam9g35ek', 'atmel,at91sam9x5ek', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['atmel,at91sam9g45-ddramc'] ['atmel,at91sam9g45-dma'] ['atmel,at91sam9g45-ebi'] ['atmel,at91sam9g45-ehci', 'usb-ehci'] ['atmel,at91sam9g45-isi'] ['atmel,at91sam9g45-lcdc'] ['atmel,at91sam9g45-matrix', 'syscon'] ['atmel,at91sam9g45-nand-controller'] ['atmel,at91sam9g45-pmecc'] ['atmel,at91sam9g45-ssc'] ['atmel,at91sam9g45-udc'] ['atmel,at91sam9m10g45ek', 'atmel,at91sam9g45', 'atmel,at91sam9'] ['atmel,at91sam9n12-hlcdc'] ['atmel,at91sam9n12-matrix', 'syscon'] ['atmel,at91sam9n12ek', 'atmel,at91sam9n12', 'atmel,at91sam9'] ['atmel,at91sam9rl-dma'] ['atmel,at91sam9rl-ebi'] ['atmel,at91sam9rl-lcdc'] ['atmel,at91sam9rl-matrix', 'syscon'] ['atmel,at91sam9rl-ssc'] ['atmel,at91sam9rl-udc'] ['atmel,at91sam9rlek', 'atmel,at91sam9rl', 'atmel,at91sam9'] ['atmel,at91sam9x25ek', 'atmel,at91sam9x5ek', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['atmel,at91sam9x35ek', 'atmel,at91sam9x5ek', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['atmel,at91sam9x5-can'] ['atmel,at91sam9x5-ebi'] ['atmel,at91sam9x5-gpio', 'atmel,at91rm9200-gpio'] ['atmel,at91sam9x5-hlcdc'] ['atmel,at91sam9x5-matrix', 'syscon'] ['atmel,at91sam9x5-pinctrl', 'atmel,at91rm9200-pinctrl', 'simple-bus'] ['atmel,hlcdc-display-controller'] ['atmel,hlcdc-pwm'] ['atmel,hsmci'] ['atmel,osc', 'fixed-clock'] ['atmel,sam9x5-wm8731-audio'] ['atmel,sama5d2-aic'] ['atmel,sama5d2-chipid'] ['atmel,sama5d2-flexcom'] ['atmel,sama5d2-hlcdc'] ['atmel,sama5d2-pinctrl'] ['atmel,sama5d2-pmecc'] ['atmel,sama5d2-ptc_ek', 'atmel,sama5d2', 'atmel,sama5'] ['atmel,sama5d2-sdhci'] ['atmel,sama5d2-secumod', 'syscon'] ['atmel,sama5d2-sfr', 'syscon'] ['atmel,sama5d2-sfrbu', 'syscon'] ['atmel,sama5d2-smc', 'syscon', 'simple-mfd'] ['atmel,sama5d2-xplained', 'atmel,sama5d2', 'atmel,sama5'] ['atmel,sama5d27-som1-ek', 'atmel,sama5d27-som1', 'atmel,sama5d27', 'atmel,sama5d2', 'atmel,sama5'] ['atmel,sama5d3-adc'] ['atmel,sama5d3-aic'] ['atmel,sama5d3-ddramc'] ['atmel,sama5d3-ebi'] ['atmel,sama5d3-hlcdc'] ['atmel,sama5d3-nand-controller'] ['atmel,sama5d3-nfc-io', 'syscon'] ['atmel,sama5d3-pinctrl', 'atmel,at91sam9x5-pinctrl', 'simple-bus'] ['atmel,sama5d3-sfr', 'syscon'] ['atmel,sama5d3-smc', 'syscon', 'simple-mfd'] ['atmel,sama5d3-udc'] ['atmel,sama5d3-xplained', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d31ek', 'atmel,sama5d3xmb', 'atmel,sama5d3xcm', 'atmel,sama5d31', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d33ek', 'atmel,sama5d3xmb', 'atmel,sama5d3xcm', 'atmel,sama5d33', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d34ek', 'atmel,sama5d3xmb', 'atmel,sama5d3xcm', 'atmel,sama5d34', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d35ek', 'atmel,sama5d3xmb', 'atmel,sama5d3xcm', 'atmel,sama5d35', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d36ek', 'atmel,sama5d3xmb', 'atmel,sama5d3xcm', 'atmel,sama5d36', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d36ek-cmp', 'atmel,sama5d3xmb-cmp', 'atmel,sama5d3xcm-cmp', 'atmel,sama5d36', 'atmel,sama5d3', 'atmel,sama5'] ['atmel,sama5d4-aic'] ['atmel,sama5d4-dma'] ['atmel,sama5d4-hlcdc'] ['atmel,sama5d4-pmecc'] ['atmel,sama5d4-sfr', 'syscon'] ['atmel,sama5d4-xplained', 'atmel,sama5d4', 'atmel,sama5'] ['atmel,sama5d4ek', 'atmel,sama5d4', 'atmel,sama5'] ['atmel,tny-a9263', 'atmel,at91sam9263', 'atmel,at91sam9'] ['atmel,usb-a9263', 'atmel,at91sam9263', 'atmel,at91sam9'] ['axentia,tse850-pcm5142'] ['calao,qil-a9260', 'atmel,at91sam9260', 'atmel,at91sam9'] ['calao,tny-a9260', 'atmel,at91sam9260', 'atmel,at91sam9'] ['calao,tny-a9g20', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['calao,usb-a9260', 'atmel,at91sam9260', 'atmel,at91sam9'] ['calao,usb-a9g20', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['calao,usb-a9g20-lpw', 'calao,usb-a9g20', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['egnite,ethernut5', 'atmel,at91sam9260', 'atmel,at91sam9'] ['focaltech,ft5426', 'edt,edt-ft5406'] ['hce,cosino_mega2560', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['l+g,vinco', 'atmel,sama5d4', 'atmel,sama5'] ['laird,dvk-som60', 'laird,som60', 'atmel,sama5d36', 'atmel,sama5d3', 'atmel,sama5'] ['laird,gatwick', 'laird,wb50n', 'atmel,sama5d31', 'atmel,sama5d3', 'atmel,sama5'] ['laird,wb45n', 'laird,wbxx', 'atmel,at91sam9x5', 'atmel,at91sam9'] ['laird,wb50n', 'atmel,sama5d31', 'atmel,sama5d3', 'atmel,sama5'] ['linux,spdif-dir'] ['microchip,lan9662-udc', 'atmel,sama5d3-udc'] ['microchip,mcp16502'] ['microchip,mcp23008'] ['microchip,mcp2515'] ['microchip,sam9x60-aic'] ['microchip,sam9x60-can', 'atmel,at91sam9x5-can'] ['microchip,sam9x60-ddramc', 'atmel,sama5d3-ddramc'] ['microchip,sam9x60-dma', 'atmel,sama5d4-dma'] ['microchip,sam9x60-ebi'] ['microchip,sam9x60-gpbr', 'atmel,at91sam9260-gpbr', 'syscon'] ['microchip,sam9x60-gpio', 'atmel,at91sam9x5-gpio', 'atmel,at91rm9200-gpio'] ['microchip,sam9x60-hlcdc'] ['microchip,sam9x60-isi', 'atmel,at91sam9g45-isi'] ['microchip,sam9x60-matrix', 'atmel,at91sam9x5-matrix', 'syscon'] ['microchip,sam9x60-nand-controller'] ['microchip,sam9x60-pinctrl', 'atmel,at91sam9x5-pinctrl', 'atmel,at91rm9200-pinctrl', 'simple-bus'] ['microchip,sam9x60-pit64b'] ['microchip,sam9x60-pmecc', 'atmel,at91sam9g45-pmecc'] ['microchip,sam9x60-sdhci'] ['microchip,sam9x60-sfr', 'syscon'] ['microchip,sam9x60-smc', 'atmel,at91sam9260-smc', 'syscon'] ['microchip,sam9x60-tcb', 'atmel,at91sam9x5-tcb', 'simple-mfd', 'syscon'] ['microchip,sam9x60-udc'] ['microchip,sama5d3-ksz9477-evb', 'atmel,sama5d36', 'atmel,sama5d3', 'atmel,sama5'] ['microchip,sama7g5-chipid'] ['microchip,sama7g5-ddr3phy'] ['microchip,sama7g5-dma'] ['microchip,sama7g5-gpbr', 'syscon'] ['microchip,sama7g5-pinctrl'] ['microchip,sama7g5-pit64b', 'microchip,sam9x60-pit64b'] ['microchip,sama7g5-sdhci', 'microchip,sam9x60-sdhci'] ['microchip,sama7g5-secumod', 'atmel,sama5d2-secumod', 'syscon'] ['microchip,sama7g5-securam', 'atmel,sama5d2-securam', 'mmio-sram'] ['microchip,sama7g5-sfrbu', 'atmel,sama5d2-sfrbu', 'syscon'] ['microchip,sama7g5-uddrc'] ['nxp,tfa9879'] ['overkiz,kizbox', 'atmel,at91sam9g20', 'atmel,at91sam9'] ['ovti,ov2640'] ['phontech,mpa1600', 'atmel,at91rm9200'] ['qt1070'] ['ronetix,pm9g45', 'atmel,at91sam9g45', 'atmel,at91sam9'] ['somfy,animeo-ip', 'atmel,at91sam9260', 'atmel,at91sam9'] ['st,m41t94'] ['telit,evk-pro3', 'atmel,at91sam9260', 'atmel,at91sam9'] ['ti,ads7843'] ['ti,pcm5142'] ['winstar,wf70gtiagdng0', 'innolux,at070tn92'] ['wm8731'] Rob
On Fri, Jul 28, 2023 at 01:32:12PM +0200, Krzysztof Kozlowski wrote: > On 28/07/2023 12:22, Varshini Rajendran wrote: > > This patch series adds support for the new SoC family - sam9x7. > > - The device tree, configs and drivers are added > > - Clock driver for sam9x7 is added > > - Support for basic peripherals is added > > - Target board SAM9X75 Curiosity is added > > > > Your threading is absolutely broken making it difficult to review and apply. I had a chat with Varshini today, they were trying to avoid sending the patches to a massive CC list, but didn't set any in-reply-to header. For the next submission whole series could be sent to the binding & platform maintainers and the individual patches additionally to their respective lists/maintainers. Does that sound okay to you, or do you think it should be broken up? Cheers, Conor.
Hi Conor, conor@kernel.org wrote on Fri, 28 Jul 2023 16:50:24 +0100: > On Fri, Jul 28, 2023 at 01:32:12PM +0200, Krzysztof Kozlowski wrote: > > On 28/07/2023 12:22, Varshini Rajendran wrote: > > > This patch series adds support for the new SoC family - sam9x7. > > > - The device tree, configs and drivers are added > > > - Clock driver for sam9x7 is added > > > - Support for basic peripherals is added > > > - Target board SAM9X75 Curiosity is added > > > > > > > Your threading is absolutely broken making it difficult to review and apply. > > I had a chat with Varshini today, they were trying to avoid sending the > patches to a massive CC list, but didn't set any in-reply-to header. > For the next submission whole series could be sent to the binding & > platform maintainers and the individual patches additionally to their > respective lists/maintainers. Does that sound okay to you, or do you > think it should be broken up? I usually prefer receiving the dt-bindings *and* the driver changes, so I can give my feedback on the description side, as well as looking at the implementation and see if that really matches what was discussed with you :) Thanks, Miquèl
On Fri, Jul 28, 2023 at 06:04:43PM +0200, Miquel Raynal wrote: > Hi Conor, > > conor@kernel.org wrote on Fri, 28 Jul 2023 16:50:24 +0100: > > > On Fri, Jul 28, 2023 at 01:32:12PM +0200, Krzysztof Kozlowski wrote: > > > On 28/07/2023 12:22, Varshini Rajendran wrote: > > > > This patch series adds support for the new SoC family - sam9x7. > > > > - The device tree, configs and drivers are added > > > > - Clock driver for sam9x7 is added > > > > - Support for basic peripherals is added > > > > - Target board SAM9X75 Curiosity is added > > > > > > > > > > Your threading is absolutely broken making it difficult to review and apply. > > > > I had a chat with Varshini today, they were trying to avoid sending the > > patches to a massive CC list, but didn't set any in-reply-to header. > > For the next submission whole series could be sent to the binding & > > platform maintainers and the individual patches additionally to their > > respective lists/maintainers. Does that sound okay to you, or do you > > think it should be broken up? > > I usually prefer receiving the dt-bindings *and* the driver changes, so > I can give my feedback on the description side, as well as looking at > the implementation and see if that really matches what was discussed > with you :) Right, that is what I was suggesting. Respective maintainers would get the drivers *and* bindings for their subsystems - IOW, each patch is sent to what get_maintainer.pl outputs for it.
On 28/07/2023 18:10, Conor Dooley wrote: > On Fri, Jul 28, 2023 at 06:04:43PM +0200, Miquel Raynal wrote: >> Hi Conor, >> >> conor@kernel.org wrote on Fri, 28 Jul 2023 16:50:24 +0100: >> >>> On Fri, Jul 28, 2023 at 01:32:12PM +0200, Krzysztof Kozlowski wrote: >>>> On 28/07/2023 12:22, Varshini Rajendran wrote: >>>>> This patch series adds support for the new SoC family - sam9x7. >>>>> - The device tree, configs and drivers are added >>>>> - Clock driver for sam9x7 is added >>>>> - Support for basic peripherals is added >>>>> - Target board SAM9X75 Curiosity is added >>>>> >>>> >>>> Your threading is absolutely broken making it difficult to review and apply. >>> >>> I had a chat with Varshini today, they were trying to avoid sending the >>> patches to a massive CC list, but didn't set any in-reply-to header. >>> For the next submission whole series could be sent to the binding & >>> platform maintainers and the individual patches additionally to their >>> respective lists/maintainers. Does that sound okay to you, or do you >>> think it should be broken up? >> >> I usually prefer receiving the dt-bindings *and* the driver changes, so >> I can give my feedback on the description side, as well as looking at >> the implementation and see if that really matches what was discussed >> with you :) > > Right, that is what I was suggesting. Respective maintainers would get > the drivers *and* bindings for their subsystems - IOW, each patch is > sent to what get_maintainer.pl outputs for it. For reviewers I find the easiest if this is mostly split per subsystem. There were here few patches for USB, few clk etc, so these easily can be separate patchsets. All the rest one-liners or one-patch-per-subsystem could be grouped and set in one patchset, after fixing the threading. But the moment the patchset grows to 50 it's time to re-think it whether this grouping is necessary or even beneficial. This is not a conversion of mach to DT (like ep93xx) which benefits of doing everything in one step. Therefore my recommendation for this work is to split it entirely per each subsystem. Best regards, Krzysztof
This patch series adds support for the new SoC family - sam9x7. - The device tree, configs and drivers are added - Clock driver for sam9x7 is added - Support for basic peripherals is added - Target board SAM9X75 Curiosity is added Changes in v3: -------------- - Fixed the DT documentation errors pointed out in v2. - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted according to sam9x7 correctly. - Picked by the previously missed tags. - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names property" as the warning was not found while validating DT-schema for at91-sam9x75_curiosity.dtb. - Dropped redundant words in the commit message. - Fixed the CHECK_DTBS warnings validated against at91-sam9x75_curiosity.dtb. - Renamed dt nodes according to naming convention. - Dropped unwanted status property in dts. - Removed nodes that are not in use from the board dts. - Removed spi DT doc patch from the series as it was already applied and a fix patch was applied subsequently. Added a patch to remove the compatible to adapt sam9x7. - Added sam9x7 compatibles in usb dt documentation. Changes in v2: -------------- - Added sam9x7 specific compatibles in DT with fallbacks - Documented all the newly added DT compatible strings - Added device tree for the target board sam9x75 curiosity and documented the same in the DT bindings documentation - Removed the dt nodes that are not supported at the moment - Removed the configs added by previous version that are not supported at the moment - Fixed all the corrections in the commit message - Changed all the instances of copyright year to 2023 - Added sam9x7 flag in PIT64B configuration - Moved macro definitions to header file - Added another divider in mck characteristics in the pmc driver - Fixed the memory leak in the pmc driver - Dropped patches that are no longer needed - Picked up Acked-by and Reviewed-by tags Hari Prasath (1): irqchip/atmel-aic5: Add support for sam9x7 aic Varshini Rajendran (49): dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7 compatible dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible dt-bindings: net: cdns,macb: add sam9x7 ethernet interface dt-bindings: clk: at91: add sam9x7 dt-bindings: clk: at91: add sam9x7 clock controller dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 dt-bindings: atmel-sysreg: add sam9x7 dt-bindings: crypto: add sam9x7 in Atmel AES dt-bindings: crypto: add sam9x7 in Atmel SHA dt-bindings: crypto: add sam9x7 in Atmel TDES dt-bindings: dmaengine: at_xdmac: add compatible with microchip,sam9x7 dt-bindings: i2c: at91: Add sam9x7 compatible string dt-bindings: mfd: at91: Add SAM9X7 compatible string dt-bindings: atmel-gpbr: add microchip,sam9x7-gpbr dt-bindings: atmel-matrix: add microchip,sam9x7-matrix dt-bindings: atmel-smc: add microchip,sam9x7-smc dt-bindings: atmel-ssc: add microchip,sam9x7-ssc dt-bindings: sdhci-of-at91: add microchip,sam9x7-sdhci dt-bindings: atmel-nand: add microchip,sam9x7-pmecc dt-bindings: pinctrl: at91: add sam9x7 dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG dt-bindings: rtc: at91rm9200: add sam9x7 compatible dt-bindings: rtt: at91rm9260: add sam9x7 compatible dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7 dt-bindings: atmel-classd: add sam9x7 compatible dt-bindings: usb: atmel: add sam9x7 dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic spi: dt-bindings: atmel,at91rm9200-spi: remove 9x60 compatible from list ASoC: dt-bindings: microchip: add sam9x7 dt-bindings: usb: ehci: Add sam9x7 dt-bindings: usb: add sam9x7 ARM: at91: pm: add support for sam9x7 SoC family ARM: at91: pm: add sam9x7 SoC init config ARM: at91: add support in SoC driver for new sam9x7 clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs clk: at91: sam9x7: add support for HW PLL freq dividers clk: at91: sama7g5: move mux table macros to header file clk: at91: sam9x7: Allow PLLs to be exported and referenced in DT clk: at91: sam9x7: add sam9x7 pmc driver power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 power: reset: at91-reset: add reset support for sam9x7 SoC power: reset: at91-reset: add sdhwc support for sam9x7 SoC ARM: at91: Kconfig: add config flag for SAM9X7 SoC ARM: configs: at91: enable config flags for sam9x7 SoC family ARM: dts: at91: sam9x7: add device tree for SoC dt-bindings: arm: add sam9x75 curiosity board ARM: dts: at91: sam9x75_curiosity: add sam9x75 curiosity board .../devicetree/bindings/arm/atmel-at91.yaml | 6 + .../devicetree/bindings/arm/atmel-sysregs.txt | 7 +- .../bindings/clock/atmel,at91rm9200-pmc.yaml | 1 + .../bindings/clock/atmel,at91sam9x5-sckc.yaml | 3 + .../crypto/atmel,at91sam9g46-aes.yaml | 6 +- .../crypto/atmel,at91sam9g46-sha.yaml | 6 +- .../crypto/atmel,at91sam9g46-tdes.yaml | 6 +- .../devicetree/bindings/dma/atmel-xdma.txt | 3 +- .../bindings/i2c/atmel,at91sam-i2c.yaml | 4 + .../interrupt-controller/atmel,aic.txt | 2 +- .../devicetree/bindings/mfd/atmel-flexcom.txt | 1 + .../devicetree/bindings/mfd/atmel-gpbr.txt | 1 + .../devicetree/bindings/mfd/atmel-matrix.txt | 1 + .../devicetree/bindings/mfd/atmel-smc.txt | 1 + .../devicetree/bindings/misc/atmel-ssc.txt | 1 + .../devicetree/bindings/mmc/sdhci-atmel.txt | 4 +- .../devicetree/bindings/mtd/atmel-nand.txt | 1 + .../devicetree/bindings/net/cdns,macb.yaml | 6 + .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 + .../power/reset/atmel,sama5d2-shdwc.yaml | 3 + .../reset/atmel,at91sam9260-reset.yaml | 4 + .../bindings/rng/atmel,at91-trng.yaml | 4 + .../bindings/rtc/atmel,at91rm9200-rtc.yaml | 18 +- .../bindings/rtc/atmel,at91sam9260-rtt.yaml | 3 + .../bindings/serial/atmel,at91-usart.yaml | 9 + .../soc/microchip/atmel,at91rm9200-tcb.yaml | 21 +- .../bindings/sound/atmel,sama5d2-classd.yaml | 7 +- .../sound/microchip,sama7g5-i2smcc.yaml | 11 +- .../bindings/spi/atmel,at91rm9200-spi.yaml | 1 - .../devicetree/bindings/usb/atmel-usb.txt | 11 +- .../devicetree/bindings/usb/generic-ehci.yaml | 7 + .../devicetree/bindings/usb/generic-ohci.yaml | 6 + .../bindings/watchdog/atmel,sama5d4-wdt.yaml | 15 +- arch/arm/boot/dts/microchip/Makefile | 5 + .../dts/microchip/at91-sam9x75_curiosity.dts | 311 +++++ arch/arm/boot/dts/microchip/sam9x7.dtsi | 1238 +++++++++++++++++ arch/arm/configs/at91_dt_defconfig | 1 + arch/arm/mach-at91/Kconfig | 23 +- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/generic.h | 2 + arch/arm/mach-at91/pm.c | 35 + arch/arm/mach-at91/sam9x7.c | 34 + drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-pll.c | 50 +- drivers/clk/at91/pmc.h | 18 + drivers/clk/at91/sam9x60.c | 7 + drivers/clk/at91/sam9x7.c | 946 +++++++++++++ drivers/clk/at91/sama7g5.c | 42 +- drivers/irqchip/irq-atmel-aic5.c | 10 + drivers/power/reset/Kconfig | 4 +- drivers/power/reset/at91-sama5d2_shdwc.c | 1 + drivers/soc/atmel/soc.c | 23 + drivers/soc/atmel/soc.h | 9 + include/dt-bindings/clock/at91.h | 4 + 54 files changed, 2871 insertions(+), 76 deletions(-) create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi create mode 100644 arch/arm/mach-at91/sam9x7.c create mode 100644 drivers/clk/at91/sam9x7.c