mbox series

[v2,00/10] Support ROHM BD96801 Scalable PMIC

Message ID cover.1716533790.git.mazziesaccount@gmail.com (mailing list archive)
Headers show
Series Support ROHM BD96801 Scalable PMIC | expand

Message

Matti Vaittinen May 24, 2024, 8:15 a.m. UTC
Support ROHM BD96801 Scalable PMIC

The ROHM BD96801 is automotive grade PMIC, intended to be usable in
multiple solutions. The BD96801 can be used as a stand-alone, or together
with separate 'companion PMICs'. This modular approach aims to make this
PMIC suitable for various use-cases.

This series brings only limited support. The more complete set of
features was sent in the RFC:
https://lore.kernel.org/lkml/cover.1712058690.git.mazziesaccount@gmail.com/

The BD96801 provides two physical IRQ lines called "intb" and "errb" in
the data-sheet. These are handled using own regmap-IRQ controller for
both of the IRQ lines. This causes a debugFS naming conflict for IRQ
domains created by the regmap-IRQ. This series adds support for setting
a name suffix to IRQ domains. Some prior discussion can be seen here:
https://lore.kernel.org/all/Zjzt8mOW6dO_7XNV@finisterre.sirena.org.uk/

As writing of this there is no known system doing configurations which
require the PMIC to be in STBY state using Linux driver. Furthermore,
ensuring the PMIC is and stays in the STBY state when configurations
are done may not be trivial. Especially, not in a generic way in a
regulator driver. This is likely to be system specific.

Hence it felt natural to upstream only partial support for
now, while leaving a note about the RFC series with more complete
support for those who may need it later.

The patches from 1 to 6 are just typical "add support for device X"
stuff. They should provide very much usable driver for BD96801 and I
hope they don't cause too many questions and can be merged when
quality seems high enough :)

Supporting the ERRB IRQ (patches 9 and 10) requires the regmap IRQ change
(patch 8) which further requires the IRQ domain change (patch 7).

Patches 7 and 8 may need more careful thinking. Thus, the ERRB IRQ
support is added as a separate step, which can be merged later or even
dropped if the irqdomain changes prove to be unacceptable.

Revision history still tries to summarize changes from the RFC for the
reviewers.

Revision history:
v1 => v2:
	- Add support for setting a name suffix for fwnode backed IRQ domains.
	- Add support for setting a domain name suffix for regmap-IRQ.
	- Add handling of ERRB IRQs.
	- Small fixes based on feedback.

RFCv2 => v1:
	- Drop ERRB IRQ from drivers (but not DT bindings).
	- Drop configuration which requires STBY - state.
	- Fix the register lock race by moving it from the regulator
	  driver to the MFD driver.

RFCv1 => RFCv2:
	- Tidying code based on feedback form Krzysztof Kozlowski and
	  Lee Jones.
	- Documented undocumented watchdog related DT properties.
	- Added usage of the watchdog IRQ.
	- Use irq_domain_update_bus_token() to work-around debugFS name
	  collision for IRQ domains.

---

Matti Vaittinen (10):
  dt-bindings: ROHM BD96801 PMIC regulators
  dt-bindings: mfd: bd96801 PMIC core
  mfd: support ROHM BD96801 PMIC core
  regulator: bd96801: ROHM BD96801 PMIC regulators
  watchdog: ROHM BD96801 PMIC WDG driver
  MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
  irqdomain: Allow giving name suffix for domain
  regmap: Allow setting IRQ domain name suffix
  mfd: bd96801: Add ERRB IRQ
  regulator: bd96801: Add ERRB IRQ

 .../bindings/mfd/rohm,bd96801-pmic.yaml       |  173 +++
 .../regulator/rohm,bd96801-regulator.yaml     |   63 ++
 MAINTAINERS                                   |    4 +
 drivers/base/regmap/regmap-irq.c              |   13 +-
 drivers/mfd/Kconfig                           |   13 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/rohm-bd96801.c                    |  488 ++++++++
 drivers/regulator/Kconfig                     |   12 +
 drivers/regulator/Makefile                    |    2 +
 drivers/regulator/bd96801-regulator.c         | 1008 +++++++++++++++++
 drivers/watchdog/Kconfig                      |   13 +
 drivers/watchdog/Makefile                     |    1 +
 drivers/watchdog/bd96801_wdt.c                |  416 +++++++
 include/linux/irqdomain.h                     |   28 +-
 include/linux/mfd/rohm-bd96801.h              |  215 ++++
 include/linux/mfd/rohm-generic.h              |    1 +
 include/linux/regmap.h                        |    4 +
 kernel/irq/irqdomain.c                        |   53 +-
 18 files changed, 2487 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd96801.c
 create mode 100644 drivers/regulator/bd96801-regulator.c
 create mode 100644 drivers/watchdog/bd96801_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd96801.h


base-commit: 4cece764965020c22cff7665b18a012006359095