diff mbox series

[v4,4/4] aspeed/watchdog: Add access_cs0 option for alt-boot

Message ID 20190828102402.13155-5-i.mikhaylov@yadro.com (mailing list archive)
State Accepted
Headers show
Series add dual-boot support | expand

Commit Message

Ivan Mikhaylov Aug. 28, 2019, 10:24 a.m. UTC
The option for the ast2400/2500 to get access to CS0 at runtime.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
 .../ABI/testing/sysfs-class-watchdog          | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

Guenter Roeck Aug. 31, 2019, 3:01 p.m. UTC | #1
On Wed, Aug 28, 2019 at 01:24:02PM +0300, Ivan Mikhaylov wrote:
> The option for the ast2400/2500 to get access to CS0 at runtime.
> 
> Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  .../ABI/testing/sysfs-class-watchdog          | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
> index 6317ade5ad19..675f9b537661 100644
> --- a/Documentation/ABI/testing/sysfs-class-watchdog
> +++ b/Documentation/ABI/testing/sysfs-class-watchdog
> @@ -72,3 +72,37 @@ Description:
>  		It is a read/write file. When read, the currently assigned
>  		pretimeout governor is returned.  When written, it sets
>  		the pretimeout governor.
> +
> +What:		/sys/class/watchdog/watchdog1/access_cs0
> +Date:		August 2019
> +Contact:	Ivan Mikhaylov <i.mikhaylov@yadro.com>,
> +		Alexander Amelkin <a.amelkin@yadro.com>
> +Description:
> +		It is a read/write file. This attribute exists only if the
> +		system has booted from the alternate flash chip due to
> +		expiration of a watchdog timer of AST2400/AST2500 when
> +		alternate boot function was enabled with 'aspeed,alt-boot'
> +		devicetree option for that watchdog or with an appropriate
> +		h/w strapping (for WDT2 only).
> +
> +		At alternate flash the 'access_cs0' sysfs node provides:
> +			ast2400: a way to get access to the primary SPI flash
> +				chip at CS0 after booting from the alternate
> +				chip at CS1.
> +			ast2500: a way to restore the normal address mapping
> +				from (CS0->CS1, CS1->CS0) to (CS0->CS0,
> +				CS1->CS1).
> +
> +		Clearing the boot code selection and timeout counter also
> +		resets to the initial state the chip select line mapping. When
> +		the SoC is in normal mapping state (i.e. booted from CS0),
> +		clearing those bits does nothing for both versions of the SoC.
> +		For alternate boot mode (booted from CS1 due to wdt2
> +		expiration) the behavior differs as described above.
> +
> +		This option can be used with wdt2 (watchdog1) only.
> +
> +		When read, the current status of the boot code selection is
> +		shown. When written with any non-zero value, it clears
> +		the boot code selection and the timeout counter, which results
> +		in chipselect reset for AST2400/AST2500.
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
index 6317ade5ad19..675f9b537661 100644
--- a/Documentation/ABI/testing/sysfs-class-watchdog
+++ b/Documentation/ABI/testing/sysfs-class-watchdog
@@ -72,3 +72,37 @@  Description:
 		It is a read/write file. When read, the currently assigned
 		pretimeout governor is returned.  When written, it sets
 		the pretimeout governor.
+
+What:		/sys/class/watchdog/watchdog1/access_cs0
+Date:		August 2019
+Contact:	Ivan Mikhaylov <i.mikhaylov@yadro.com>,
+		Alexander Amelkin <a.amelkin@yadro.com>
+Description:
+		It is a read/write file. This attribute exists only if the
+		system has booted from the alternate flash chip due to
+		expiration of a watchdog timer of AST2400/AST2500 when
+		alternate boot function was enabled with 'aspeed,alt-boot'
+		devicetree option for that watchdog or with an appropriate
+		h/w strapping (for WDT2 only).
+
+		At alternate flash the 'access_cs0' sysfs node provides:
+			ast2400: a way to get access to the primary SPI flash
+				chip at CS0 after booting from the alternate
+				chip at CS1.
+			ast2500: a way to restore the normal address mapping
+				from (CS0->CS1, CS1->CS0) to (CS0->CS0,
+				CS1->CS1).
+
+		Clearing the boot code selection and timeout counter also
+		resets to the initial state the chip select line mapping. When
+		the SoC is in normal mapping state (i.e. booted from CS0),
+		clearing those bits does nothing for both versions of the SoC.
+		For alternate boot mode (booted from CS1 due to wdt2
+		expiration) the behavior differs as described above.
+
+		This option can be used with wdt2 (watchdog1) only.
+
+		When read, the current status of the boot code selection is
+		shown. When written with any non-zero value, it clears
+		the boot code selection and the timeout counter, which results
+		in chipselect reset for AST2400/AST2500.