From patchwork Tue Mar 17 20:50:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11443963 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E99031820 for ; Tue, 17 Mar 2020 20:51:04 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id C960D20757 for ; Tue, 17 Mar 2020 20:51:04 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="I6UjhQhZ" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727111AbgCQUvE (ORCPT ); Tue, 17 Mar 2020 16:51:04 -0400 Received: from ssl.serverraum.org ([176.9.125.105]:45799 "EHLO ssl.serverraum.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727024AbgCQUvA (ORCPT ); Tue, 17 Mar 2020 16:51:00 -0400 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 62F3223EBD; Tue, 17 Mar 2020 21:50:57 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1584478257; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=zlwQG40HXo3uxJm205guu0CxzwK9j2kdb75+DBg3bTQ=; b=I6UjhQhZqOzU05rPmxVgLrd/u00H32IfIOxfsncPXBN9b6qDGtTCnBgt1dktAK5pSNCBty TZ8g10VYatTrHIHBHa9JtvpihBm/xFcmiQitS+yJsV3hCFsWczfqazQ9WRtKJmpmXHVYeW vc1D5H+yCTtLJGaUX6k+UegVoi+mLaY= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Linus Walleij , Bartosz Golaszewski , Rob Herring , Jean Delvare , Guenter Roeck , Lee Jones , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Wim Van Sebroeck , Shawn Guo , Li Yang , Thomas Gleixner , Jason Cooper , Marc Zyngier , Michael Walle Subject: [PATCH 14/18] hwmon: add support for the sl28cpld hardware monitoring controller Date: Tue, 17 Mar 2020 21:50:13 +0100 Message-Id: <20200317205017.28280-15-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200317205017.28280-1-michael@walle.cc> References: <20200317205017.28280-1-michael@walle.cc> MIME-Version: 1.0 X-Spamd-Bar: ++++++ X-Spam-Level: ****** X-Rspamd-Server: web X-Spam-Status: Yes, score=6.40 X-Spam-Score: 6.40 X-Rspamd-Queue-Id: 62F3223EBD X-Spamd-Result: default: False [6.40 / 15.00]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_MISSING_CHARSET(2.50)[]; FREEMAIL_ENVRCPT(0.00)[gmail.com]; TAGGED_RCPT(0.00)[dt]; MIME_GOOD(-0.10)[text/plain]; BROKEN_CONTENT_TYPE(1.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[]; NEURAL_SPAM(0.00)[0.511]; DKIM_SIGNED(0.00)[]; RCPT_COUNT_TWELVE(0.00)[22]; MID_CONTAINS_FROM(1.00)[]; RCVD_COUNT_ZERO(0.00)[0]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:31334, ipnet:2a02:810c:8000::/33, country:DE]; FREEMAIL_CC(0.00)[linaro.org,baylibre.com,kernel.org,suse.com,roeck-us.net,gmail.com,pengutronix.de,linux-watchdog.org,nxp.com,linutronix.de,lakedaemon.net,walle.cc]; SUSPICIOUS_RECIPS(1.50)[] X-Spam: Yes Sender: linux-watchdog-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-watchdog@vger.kernel.org This adds support for the hardware monitoring controller of the sl28cpld board management controller. This driver is part of a multi-function device. Signed-off-by: Michael Walle --- drivers/hwmon/Kconfig | 10 +++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sl28cpld-hwmon.c | 146 +++++++++++++++++++++++++++++++++ 3 files changed, 157 insertions(+) create mode 100644 drivers/hwmon/sl28cpld-hwmon.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 05a30832c6ba..c98716f78cfa 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1412,6 +1412,16 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SL28CPLD + tristate "Kontron's SMARC-sAL28 hardware monitoring driver" + depends on MFD_SL28CPLD + help + If you say yes here you get support for a fan connected to the + input of the SMARC connector of Kontron's SMARC-sAL28 module. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index b0b9c8e57176..dfb0f8cda2dd 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -155,6 +155,7 @@ obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o +obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o diff --git a/drivers/hwmon/sl28cpld-hwmon.c b/drivers/hwmon/sl28cpld-hwmon.c new file mode 100644 index 000000000000..7ac42bb0a48c --- /dev/null +++ b/drivers/hwmon/sl28cpld-hwmon.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SMARC-sAL28 fan hardware monitoring driver. + * + * Copyright 2019 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FAN_INPUT 0 +#define FAN_SCALE_X8 BIT(7) +#define FAN_VALUE_MASK GENMASK(6, 0) + +struct sl28cpld_hwmon { + struct regmap *regmap; + u32 offset; +}; + +static umode_t sl28cpld_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static int sl28cpld_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *input) +{ + struct sl28cpld_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_fan_input: + ret = regmap_read(hwmon->regmap, hwmon->offset + FAN_INPUT, + &value); + if (ret) + return ret; + /* + * The register has a 7 bit value and 1 bit which indicates the + * scale. If the MSB is set, then the lower 7 bit has to be + * multiplied by 8, to get the correct reading. + */ + if (value & FAN_SCALE_X8) + value = FIELD_GET(FAN_VALUE_MASK, value) << 3; + + /* + * The counter period is 1000ms and the sysfs specification + * says we should asssume 2 pulses per revolution. + */ + value *= 60 / 2; + + break; + default: + return -EOPNOTSUPP; + } + + *input = value; + return 0; +} + +static const u32 sl28cpld_hwmon_fan_config[] = { + HWMON_F_INPUT, + 0 +}; + +static const struct hwmon_channel_info sl28cpld_hwmon_fan = { + .type = hwmon_fan, + .config = sl28cpld_hwmon_fan_config, +}; + +static const struct hwmon_channel_info *sl28cpld_hwmon_info[] = { + &sl28cpld_hwmon_fan, + NULL +}; + +static const struct hwmon_ops sl28cpld_hwmon_ops = { + .is_visible = sl28cpld_hwmon_is_visible, + .read = sl28cpld_hwmon_read, +}; + +static const struct hwmon_chip_info sl28cpld_hwmon_chip_info = { + .ops = &sl28cpld_hwmon_ops, + .info = sl28cpld_hwmon_info, +}; + +static int sl28cpld_hwmon_probe(struct platform_device *pdev) +{ + struct device *hwmon_dev; + struct sl28cpld_hwmon *hwmon; + struct resource *res; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + if (!pdev->dev.parent) + return -ENODEV; + + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!hwmon->regmap) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_REG, 0); + if (!res) + return -EINVAL; + hwmon->offset = res->start; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + "sl28cpld_hwmon", + hwmon, + &sl28cpld_hwmon_chip_info, + NULL); + if (IS_ERR(hwmon_dev)) { + dev_err(&pdev->dev, "failed to register as hwmon device"); + return PTR_ERR(hwmon_dev); + } + + return 0; +} + +static const struct platform_device_id sl28cpld_hwmon_id_table[] = { + {"sl28cpld-fan", 0}, +}; +MODULE_DEVICE_TABLE(platform, sl28cpld_hwmon_id_table); + +static struct platform_driver sl28cpld_hwmon_driver = { + .probe = sl28cpld_hwmon_probe, + .id_table = sl28cpld_hwmon_id_table, + .driver = { + .name = "sl28cpld-hwmon", + }, +}; +module_platform_driver(sl28cpld_hwmon_driver); + +MODULE_DESCRIPTION("sl28cpld Hardware Monitoring Driver"); +MODULE_LICENSE("GPL");