diff mbox series

[01/10] dt-bindings: watchdog: sp-805: Convert to Json-schema

Message ID 20200828130602.42203-2-andre.przywara@arm.com (mailing list archive)
State Not Applicable
Headers show
Series dt-bindings: Convert SP805 to Json-schema (and fix users) | expand

Commit Message

Andre Przywara Aug. 28, 2020, 1:05 p.m. UTC
Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.

A straight-forward conversion, but the requirement for providing two
clocks got strengthened from "should" to "must".

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 .../bindings/watchdog/arm,sp805.txt           | 32 --------
 .../bindings/watchdog/arm,sp805.yaml          | 75 +++++++++++++++++++
 2 files changed, 75 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml

Comments

Viresh Kumar Aug. 31, 2020, 5:28 a.m. UTC | #1
On 28-08-20, 14:05, Andre Przywara wrote:
> Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.
> 
> A straight-forward conversion, but the requirement for providing two
> clocks got strengthened from "should" to "must".
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  .../bindings/watchdog/arm,sp805.txt           | 32 --------
>  .../bindings/watchdog/arm,sp805.yaml          | 75 +++++++++++++++++++
>  2 files changed, 75 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
>  create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Rob Herring Sept. 8, 2020, 5:20 p.m. UTC | #2
On Fri, Aug 28, 2020 at 7:06 AM Andre Przywara <andre.przywara@arm.com> wrote:
>
> Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.
>
> A straight-forward conversion, but the requirement for providing two
> clocks got strengthened from "should" to "must".
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  .../bindings/watchdog/arm,sp805.txt           | 32 --------
>  .../bindings/watchdog/arm,sp805.yaml          | 75 +++++++++++++++++++
>  2 files changed, 75 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
>  create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
>
> diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> deleted file mode 100644
> index bee6f1f0e41b..000000000000
> --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -ARM AMBA Primecell SP805 Watchdog
> -
> -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
> -can be used to identify the peripheral type, vendor, and revision.
> -This value can be used for driver matching.
> -
> -As SP805 WDT is a primecell IP, it follows the base bindings specified in
> -'arm/primecell.txt'
> -
> -Required properties:
> -- compatible:  Should be "arm,sp805" & "arm,primecell"
> -- reg:         Should contain location and length for watchdog timer register
> -- clocks:      Clocks driving the watchdog timer hardware. This list should be
> -               2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
> -               wdog_clk can be equal to or be a sub-multiple of the apb_pclk
> -               frequency
> -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
> -               second one
> -
> -Optional properties:
> -- interrupts:  Should specify WDT interrupt number
> -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
> -               default timeout is determined by the driver
> -
> -Example:
> -       watchdog@66090000 {
> -               compatible = "arm,sp805", "arm,primecell";
> -               reg = <0x66090000 0x1000>;
> -               interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> -               clocks = <&wdt_clk>, <&apb_pclk>;
> -               clock-names = "wdog_clk", "apb_pclk";
> -       };
> diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> new file mode 100644
> index 000000000000..980e155d3387
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM AMBA Primecell SP805 Watchdog
> +
> +maintainers:
> +  - Viresh Kumar <vireshk@kernel.org>
> +
> +description: |+
> +  The Arm SP805 IP implements a watchdog device, which triggers an interrupt
> +  after a configurable time period. If that interrupt has not been serviced
> +  when the next interrupt would be triggered, the reset signal is asserted.
> +
> +allOf:
> +  - $ref: /schemas/arm/primecell.yaml#

Should also ref watchdog.yaml here.

> +
> +# Need a custom select here or 'arm,primecell' will match on lots of nodes
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: arm,sp805
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: arm,sp805
> +      - const: arm,primecell
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: |
> +      Clocks driving the watchdog timer hardware. The first clock is used
> +      for the actual watchdog counter. The second clock drives the register
> +      interface.
> +    minItems: 2
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: wdog_clk
> +      - const: apb_pclk
> +
> +  timeout-sec:
> +    description: |
> +      Should specify default WDT timeout in seconds. If unset, the default
> +      timeout is determined by the driver.
> +    $ref: /schemas/types.yaml#/definitions/uint32

You can drop this as it is part of watchdog.yaml.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names

Add:

unevaluatedProperties: false


> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    watchdog@66090000 {
> +        compatible = "arm,sp805", "arm,primecell";
> +        reg = <0x66090000 0x1000>;
> +        interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&wdt_clk>, <&apb_pclk>;
> +        clock-names = "wdog_clk", "apb_pclk";
> +    };
> --
> 2.17.1
>
Rob Herring Sept. 8, 2020, 5:25 p.m. UTC | #3
On Tue, Sep 8, 2020 at 11:20 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Fri, Aug 28, 2020 at 7:06 AM Andre Przywara <andre.przywara@arm.com> wrote:
> >
> > Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.
> >
> > A straight-forward conversion, but the requirement for providing two
> > clocks got strengthened from "should" to "must".
> >
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > ---
> >  .../bindings/watchdog/arm,sp805.txt           | 32 --------
> >  .../bindings/watchdog/arm,sp805.yaml          | 75 +++++++++++++++++++
> >  2 files changed, 75 insertions(+), 32 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> >  create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> > deleted file mode 100644
> > index bee6f1f0e41b..000000000000
> > --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> > +++ /dev/null
> > @@ -1,32 +0,0 @@
> > -ARM AMBA Primecell SP805 Watchdog
> > -
> > -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
> > -can be used to identify the peripheral type, vendor, and revision.
> > -This value can be used for driver matching.
> > -
> > -As SP805 WDT is a primecell IP, it follows the base bindings specified in
> > -'arm/primecell.txt'
> > -
> > -Required properties:
> > -- compatible:  Should be "arm,sp805" & "arm,primecell"
> > -- reg:         Should contain location and length for watchdog timer register
> > -- clocks:      Clocks driving the watchdog timer hardware. This list should be
> > -               2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
> > -               wdog_clk can be equal to or be a sub-multiple of the apb_pclk
> > -               frequency
> > -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
> > -               second one
> > -
> > -Optional properties:
> > -- interrupts:  Should specify WDT interrupt number
> > -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
> > -               default timeout is determined by the driver
> > -
> > -Example:
> > -       watchdog@66090000 {
> > -               compatible = "arm,sp805", "arm,primecell";
> > -               reg = <0x66090000 0x1000>;
> > -               interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> > -               clocks = <&wdt_clk>, <&apb_pclk>;
> > -               clock-names = "wdog_clk", "apb_pclk";
> > -       };
> > diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> > new file mode 100644
> > index 000000000000..980e155d3387
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> > @@ -0,0 +1,75 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ARM AMBA Primecell SP805 Watchdog
> > +
> > +maintainers:
> > +  - Viresh Kumar <vireshk@kernel.org>
> > +
> > +description: |+
> > +  The Arm SP805 IP implements a watchdog device, which triggers an interrupt
> > +  after a configurable time period. If that interrupt has not been serviced
> > +  when the next interrupt would be triggered, the reset signal is asserted.
> > +
> > +allOf:
> > +  - $ref: /schemas/arm/primecell.yaml#
>
> Should also ref watchdog.yaml here.

Actually, you should also drop primecell.yaml as that will get applied
already with the 'arm,primecell' compatible match.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
deleted file mode 100644
index bee6f1f0e41b..000000000000
--- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
+++ /dev/null
@@ -1,32 +0,0 @@ 
-ARM AMBA Primecell SP805 Watchdog
-
-SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
-can be used to identify the peripheral type, vendor, and revision.
-This value can be used for driver matching.
-
-As SP805 WDT is a primecell IP, it follows the base bindings specified in
-'arm/primecell.txt'
-
-Required properties:
-- compatible:  Should be "arm,sp805" & "arm,primecell"
-- reg:         Should contain location and length for watchdog timer register
-- clocks:      Clocks driving the watchdog timer hardware. This list should be
-               2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
-               wdog_clk can be equal to or be a sub-multiple of the apb_pclk
-               frequency
-- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
-               second one
-
-Optional properties:
-- interrupts:  Should specify WDT interrupt number
-- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
-               default timeout is determined by the driver
-
-Example:
-	watchdog@66090000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x66090000 0x1000>;
-		interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&wdt_clk>, <&apb_pclk>;
-		clock-names = "wdog_clk", "apb_pclk";
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
new file mode 100644
index 000000000000..980e155d3387
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
@@ -0,0 +1,75 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell SP805 Watchdog
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+
+description: |+
+  The Arm SP805 IP implements a watchdog device, which triggers an interrupt
+  after a configurable time period. If that interrupt has not been serviced
+  when the next interrupt would be triggered, the reset signal is asserted.
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp805
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp805
+      - const: arm,primecell
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clocks driving the watchdog timer hardware. The first clock is used
+      for the actual watchdog counter. The second clock drives the register
+      interface.
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: wdog_clk
+      - const: apb_pclk
+
+  timeout-sec:
+    description: |
+      Should specify default WDT timeout in seconds. If unset, the default
+      timeout is determined by the driver.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    watchdog@66090000 {
+        compatible = "arm,sp805", "arm,primecell";
+        reg = <0x66090000 0x1000>;
+        interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&wdt_clk>, <&apb_pclk>;
+        clock-names = "wdog_clk", "apb_pclk";
+    };