| Message ID | 20201207060005.21293-1-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | watchdog: qcom: Avoid context switch in restart handler | expand |
On 12/6/20 10:00 PM, Manivannan Sadhasivam wrote: > The use of msleep() in the restart handler will cause scheduler to > induce a context switch which is not desirable. This generates below > warning on SDX55 when WDT is the only available restart source: > > [ 39.800188] reboot: Restarting system > [ 39.804115] ------------[ cut here ]------------ > [ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764 > [ 39.812538] Modules linked in: > [ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47 > [ 39.824854] Hardware name: Generic DT based system > [ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14) > [ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0) > [ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0) > [ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8) > [ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764) > [ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640) > [ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c) > [ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4) > [ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38) > [ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc) > [ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28) > [ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84) > [ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c) > [ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0) > [ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54) > [ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0) > [ 39.958855] bfa0: 0001221c bed2fe24 fee1dead 28121969 01234567 00000000 > [ 39.963832] bfc0: 0001221c bed2fe24 00000003 00000058 000225e0 00000000 00000000 00000000 > [ 39.971985] bfe0: b6e62560 bed2fc84 00010fd8 b6e62580 > [ 39.980124] ---[ end trace 3f578288bad866e4 ]--- > > Hence, replace msleep() with mdelay() to fix this issue. > > Fixes: 05e487d905ab ("watchdog: qcom: register a restart notifier") > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > drivers/watchdog/qcom-wdt.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c > index ab7465d186fd..cdf754233e53 100644 > --- a/drivers/watchdog/qcom-wdt.c > +++ b/drivers/watchdog/qcom-wdt.c > @@ -148,7 +148,7 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, > */ > wmb(); > > - msleep(150); > + mdelay(150); > return 0; > } > >
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c index ab7465d186fd..cdf754233e53 100644 --- a/drivers/watchdog/qcom-wdt.c +++ b/drivers/watchdog/qcom-wdt.c @@ -148,7 +148,7 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, */ wmb(); - msleep(150); + mdelay(150); return 0; }
The use of msleep() in the restart handler will cause scheduler to induce a context switch which is not desirable. This generates below warning on SDX55 when WDT is the only available restart source: [ 39.800188] reboot: Restarting system [ 39.804115] ------------[ cut here ]------------ [ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764 [ 39.812538] Modules linked in: [ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47 [ 39.824854] Hardware name: Generic DT based system [ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14) [ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0) [ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0) [ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8) [ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764) [ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640) [ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c) [ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4) [ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38) [ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc) [ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28) [ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84) [ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c) [ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0) [ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54) [ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0) [ 39.958855] bfa0: 0001221c bed2fe24 fee1dead 28121969 01234567 00000000 [ 39.963832] bfc0: 0001221c bed2fe24 00000003 00000058 000225e0 00000000 00000000 00000000 [ 39.971985] bfe0: b6e62560 bed2fc84 00010fd8 b6e62580 [ 39.980124] ---[ end trace 3f578288bad866e4 ]--- Hence, replace msleep() with mdelay() to fix this issue. Fixes: 05e487d905ab ("watchdog: qcom: register a restart notifier") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/watchdog/qcom-wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)