@@ -215,6 +215,15 @@ config ADV_SWBUTTON
To compile this driver as a module, choose M here. The module will
be called adv_swbutton.
+config AHC1EC0_CORE
+ tristate "Advantech AHC1EC0 Embedded Controller Core"
+ depends on X86
+ help
+ This driver provides core functionality for the Advantech AHC1EC0
+ Embedded Controller (EC) along with registration for HWMON and
+ Watchdog sub-devices. It also provides lower read and write APIs for
+ communication with the EC chip.
+
config APPLE_GMUX
tristate "Apple Gmux Driver"
depends on ACPI && PCI
@@ -27,6 +27,7 @@ obj-$(CONFIG_AMD_PMC) += amd-pmc.o
# Advantech
obj-$(CONFIG_ADV_SWBUTTON) += adv_swbutton.o
+obj-$(CONFIG_AHC1EC0_CORE) += ahc1ec0-core.o
# Apple
obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o
new file mode 100644
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Advantech AHC1EC0 Embedded Controller Core
+ *
+ * Copyright 2021 Advantech IIoT Group
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/platform_data/ahc1ec0.h>
+#include <linux/module.h>
+
+/* Wait IBF (Input Buffer Full) clear */
+static int ec_wait_write(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
+ return 0;
+
+ udelay(EC_RETRY_UDELAY);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Wait OBF (Output Buffer Full) data ready */
+static int ec_wait_read(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
+ return 0;
+
+ udelay(EC_RETRY_UDELAY);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Read data from EC HW RAM, the process is the following:
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send read command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send read address to EC data port
+ * Step 4. Wait OBF data ready
+ * Step 5. Get data from EC data port
+ */
+int ahc1ec_read_hw_ram(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char *data)
+{
+ int ret;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ *data = inb(EC_STATUS_PORT);
+
+ mutex_unlock(&ddata->lock);
+
+ return ret;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_read_hw_ram);
+
+/* Write data to EC HW RAM
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send write command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send write address to EC data port
+ * Step 4. Wait IBF clear that means command is got by EC
+ * Step 5. Send data to EC data port
+ */
+int ahc1ec_write_hw_ram(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char data)
+{
+ int ret;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(data, EC_STATUS_PORT);
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_write_hw_ram);
+
+/* Get dynamic control table */
+int adv_get_dynamic_tab(struct adv_ec_ddata *ddata)
+{
+ int i, ret;
+ unsigned char pin_tmp, device_id;
+
+ mutex_lock(&ddata->lock);
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ ddata->dym_tbl[i].device_id = EC_TBL_NOTFOUND;
+ ddata->dym_tbl[i].hw_pin_num = EC_TBL_NOTFOUND;
+ }
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(i, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ /*
+ * If item is defined, EC will return item number.
+ * If table item is not defined, EC will return EC_TBL_NOTFOUND(0xFF).
+ */
+ pin_tmp = inb(EC_STATUS_PORT);
+ if (pin_tmp == EC_TBL_NOTFOUND)
+ goto pass;
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ pin_tmp = inb(EC_STATUS_PORT) & EC_STATUS_BIT;
+ if (pin_tmp == EC_TBL_NOTFOUND)
+ goto pass;
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ device_id = inb(EC_STATUS_PORT) & EC_STATUS_BIT;
+
+ ddata->dym_tbl[i].device_id = device_id;
+ ddata->dym_tbl[i].hw_pin_num = pin_tmp;
+ }
+
+pass:
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+
+ return ret;
+}
+EXPORT_SYMBOL(adv_get_dynamic_tab);
+
+int adv_ec_get_productname(struct adv_ec_ddata *ddata, char *product)
+{
+ const char *vendor, *device;
+ int length = 0;
+
+ /* Check it is Advantech board */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
+ return -ENODEV;
+
+ /* Get product model name */
+ device = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (device) {
+ while ((device[length] != ' ') && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
+ length++;
+ memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+ memmove(product, device, length);
+
+ dev_info(ddata->dev, "BIOS Product Name = %s\n", product);
+
+ return 0;
+ }
+
+ dev_warn(ddata->dev, "This device is not Advantech Devices (%s)!\n", product);
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL(adv_ec_get_productname);
+
+int ahc1ec_read_adc_value(struct adv_ec_ddata *ddata, unsigned char hwpin,
+ unsigned char multi)
+{
+ int ret;
+ u32 ret_val;
+ unsigned int LSB, MSB;
+
+ mutex_lock(&ddata->lock);
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ADC_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(hwpin, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == EC_TBL_NOTFOUND) {
+ mutex_unlock(&ddata->lock);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ADC_LSB_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ LSB = inb(EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ADC_MSB_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ MSB = inb(EC_STATUS_PORT);
+ ret_val = ((MSB << 8) | LSB) & EC_ADC_VALID_BIT;
+ ret_val = ret_val * multi * 100;
+
+ mutex_unlock(&ddata->lock);
+ return ret_val;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_read_adc_value);
+
+int ahc1ec_read_acpi_value(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char *pvalue)
+{
+ int ret;
+ unsigned char value;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ value = inb(EC_STATUS_PORT);
+ *pvalue = value;
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_read_acpi_value);
+
+int ahc1ec_write_acpi_value(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_write_acpi_value);
+
+int ahc1ec_read_gpio_status(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char *pvalue)
+{
+ int ret;
+
+ unsigned char gpio_status_value;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(pin_number, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == EC_TBL_NOTFOUND) {
+ ret = -1;
+ goto error;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ gpio_status_value = inb(EC_STATUS_PORT);
+
+ *pvalue = gpio_status_value;
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_read_gpio_status);
+
+int ahc1ec_write_gpio_status(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(pin_number, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == EC_TBL_NOTFOUND) {
+ ret = -1;
+ goto error;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_write_gpio_status);
+
+int ahc1ec_read_gpio_dir(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char *pvalue)
+{
+ int ret;
+ unsigned char gpio_dir_value;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(pin_number, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == EC_TBL_NOTFOUND) {
+ ret = -1;
+ goto error;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ gpio_dir_value = inb(EC_STATUS_PORT);
+ *pvalue = gpio_dir_value;
+
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_read_gpio_dir);
+
+int ahc1ec_write_gpio_dir(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(pin_number, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == EC_TBL_NOTFOUND) {
+ mutex_unlock(&ddata->lock);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_write_gpio_dir);
+
+int ahc1ec_write_hwram_command(struct adv_ec_ddata *ddata, unsigned char data)
+{
+ int ret;
+
+ mutex_lock(&ddata->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(data, EC_COMMAND_PORT);
+
+ mutex_unlock(&ddata->lock);
+ return 0;
+
+error:
+ mutex_unlock(&ddata->lock);
+ dev_err(ddata->dev, "Wait for IBF or OBF too long.\n");
+ return ret;
+}
+EXPORT_SYMBOL(ahc1ec_write_hwram_command);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ahc1ec0-core");
+MODULE_DESCRIPTION("Advantech AHC1EC0 Embedded Controller Core");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_VERSION("1.0");
new file mode 100644
@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __LINUX_AHC1EC0_H
+#define __LINUX_AHC1EC0_H
+
+#include <linux/device.h>
+
+#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
+#define EC_STATUS_PORT 0x299 /* EC I/O data port */
+
+#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
+#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
+#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
+#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
+
+/* Analog to digital converter command */
+#define EC_ADC_INDEX_WRITE 0x15 /* Write ADC port number into index */
+#define EC_ADC_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
+#define EC_ADC_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
+#define EC_ADC_VALID_BIT 0x03FF
+
+/* Voltage device ID */
+#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
+#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
+#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
+#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
+#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
+#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
+#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
+#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
+#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
+#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
+#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
+#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
+#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
+#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
+#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
+#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
+#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
+#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
+#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
+#define EC_DID_DC 0x6B /* ADC. onboard voltage */
+#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
+#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
+
+/* Current device ID */
+#define EC_DID_CURRENT 0x74
+
+/* ACPI commands */
+#define EC_ACPI_RAM_READ 0x80
+#define EC_ACPI_RAM_WRITE 0x81
+
+/*
+ * Dynamic control table commands
+ * The table includes HW pin number, Device ID, and Pin polarity
+ */
+#define EC_TBL_WRITE_ITEM 0x20
+#define EC_TBL_GET_PIN 0x21
+#define EC_TBL_GET_DEVID 0x22
+#define EC_MAX_TBL_NUM 32
+#define EC_TBL_NOTFOUND 0xFF /*If table item is not defined, EC will return 0xFF.*/
+#define EC_STATUS_BIT 0xFF
+
+/* LED Device ID table */
+#define EC_DID_LED_RUN 0xE1
+#define EC_DID_LED_ERR 0xE2
+#define EC_DID_LED_SYS_RECOVERY 0xE3
+#define EC_DID_LED_D105_G 0xE4
+#define EC_DID_LED_D106_G 0xE5
+#define EC_DID_LED_D107_G 0xE6
+
+/* LED control HW RAM address 0xA0-0xAF */
+#define EC_HWRAM_LED_BASE_ADDR 0xA0
+#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) /* N:0-3 */
+#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
+#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
+#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
+
+/* LED control bit */
+#define LED_CTRL_ENABLE_BIT() BIT(4)
+#define LED_CTRL_INTCTL_BIT() BIT(5)
+#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
+#define LED_CTRL_POLARITY_MASK (0x000F << 0)
+#define LED_CTRL_INTCTL_EXTERNAL 0
+#define LED_CTRL_INTCTL_INTERNAL 1
+
+#define LED_DISABLE 0x0
+#define LED_ON 0x1
+#define LED_FAST 0x3
+#define LED_NORMAL 0x5
+#define LED_SLOW 0x7
+#define LED_MANUAL 0xF
+
+#define LED_CTRL_LEDBIT_DISABLE 0x0000
+#define LED_CTRL_LEDBIT_ON 0x03FF
+#define LED_CTRL_LEDBIT_FAST 0x02AA
+#define LED_CTRL_LEDBIT_NORMAL 0x0333
+#define LED_CTRL_LEDBIT_SLOW 0x03E0
+
+/* Get the device name */
+#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
+
+/*
+ * Advantech Embedded Controller watchdog commands
+ * EC can send multi-stage watchdog event. System can setup watchdog event
+ * independently to make up event sequence.
+ */
+#define EC_COMMANS_PORT_IBF_MASK 0x02
+#define EC_RESET_EVENT 0x04
+#define EC_WDT_START 0x28
+#define EC_WDT_STOP 0x29
+#define EC_WDT_RESET 0x2A
+#define EC_WDT_BOOTTMEWDT_STOP 0x2B
+
+#define EC_HW_RAM 0x89
+
+#define EC_EVENT_FLAG 0x57
+#define EC_ENABLE_DELAY_H 0x58
+#define EC_ENABLE_DELAY_L 0x59
+#define EC_POWER_BTN_TIME_H 0x5A
+#define EC_POWER_BTN_TIME_L 0x5B
+#define EC_RESET_DELAY_TIME_H 0x5E
+#define EC_RESET_DELAY_TIME_L 0x5F
+#define EC_PIN_DELAY_TIME_H 0x60
+#define EC_PIN_DELAY_TIME_L 0x61
+#define EC_SCI_DELAY_TIME_H 0x62
+#define EC_SCI_DELAY_TIME_L 0x63
+
+/* EC ACPI commands */
+#define EC_ACPI_DATA_READ 0x80
+#define EC_ACPI_DATA_WRITE 0x81
+
+/* Brightness ACPI Addr */
+#define BRIGHTNESS_ACPI_ADDR 0x50
+
+/* EC HW RAM commands */
+#define EC_HW_EXTEND_RAM_READ 0x86
+#define EC_HW_EXTEND_RAM_WRITE 0x87
+#define EC_HW_RAM_READ 0x88
+#define EC_HW_RAM_WRITE 0x89
+
+/* EC Smbus commands */
+#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
+#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
+#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
+
+/* Smbus transmit protocol */
+#define EC_SMBUS_PROTOCOL 0x00
+
+/* SMBUS status */
+#define EC_SMBUS_STATUS 0x01
+
+/* SMBUS device slave address (bit0 must be 0) */
+#define EC_SMBUS_SLV_ADDR 0x02
+
+/* SMBUS device command */
+#define EC_SMBUS_CMD 0x03
+
+/* 0x04-0x24 Data In read process, return data are stored in this address */
+#define EC_SMBUS_DATA 0x04
+
+#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
+
+/* SMBUS channel selector (0-4) */
+#define EC_SMBUS_CHANNEL 0x2B
+
+/* EC SMBUS transmit Protocol code */
+#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
+#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
+#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
+#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
+#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
+#define SMBUS_BYTE_READ 0x07 /* Read Byte */
+#define SMBUS_WORD_WRITE 0x08 /* Write Word */
+#define SMBUS_WORD_READ 0x09 /* Read Word */
+#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
+#define SMBUS_BLOCK_READ 0x0B /* Read Block */
+#define SMBUS_PROC_CALL 0x0C /* Process Call */
+#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
+#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
+#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
+
+/* GPIO control commands */
+#define EC_GPIO_INDEX_WRITE 0x10
+#define EC_GPIO_STATUS_READ 0x11
+#define EC_GPIO_STATUS_WRITE 0x12
+#define EC_GPIO_DIR_READ 0x1D
+#define EC_GPIO_DIR_WRITE 0x1E
+
+/* One Key Recovery commands */
+#define EC_ONE_KEY_FLAG 0x9C
+
+/* ASG OEM commands */
+#define EC_ASG_OEM 0xEA
+#define EC_ASG_OEM_READ 0x00
+#define EC_ASG_OEM_WRITE 0x01
+#define EC_OEM_POWER_STATUS_VIN1 0X10
+#define EC_OEM_POWER_STATUS_VIN2 0X11
+#define EC_OEM_POWER_STATUS_BAT1 0X12
+#define EC_OEM_POWER_STATUS_BAT2 0X13
+
+/* GPIO DEVICE ID */
+#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
+#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
+#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
+#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
+#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
+#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
+#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
+#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
+
+/* Lmsensor Chip Register */
+#define NSLM96163_CHANNEL 0x02
+
+/* NS_LM96163 address 0x98 */
+#define NSLM96163_ADDR 0x98
+
+/* LM96163 index(0x00) Local Temperature (Signed MSB) */
+#define NSLM96163_LOC_TEMP 0x00
+
+/* HWMON registers */
+#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
+#define INA266_REG_POWER 0x03 /* 25mW */
+#define INA266_REG_CURRENT 0x04 /* 1mA */
+
+struct ec_hw_pin_table {
+ unsigned int vbat[2];
+ unsigned int v5[2];
+ unsigned int v12[2];
+ unsigned int vcore[2];
+ unsigned int vdc[2];
+ unsigned int ec_current[2];
+ unsigned int power[2];
+};
+
+struct ec_dynamic_table {
+ unsigned char device_id;
+ unsigned char hw_pin_num;
+};
+
+struct ec_smbuso_em0 {
+ unsigned char hw_pin_num;
+};
+
+struct pled_hw_pin_tbl {
+ unsigned int pled[6];
+};
+
+struct adv_ec_ddata {
+ char *bios_product_name;
+ struct mutex lock; /* lock EC access */
+ struct device *dev;
+ struct class *adv_ec_class;
+
+ struct ec_dynamic_table *dym_tbl;
+};
+
+int adv_get_dynamic_tab(struct adv_ec_ddata *ddata);
+int adv_ec_get_productname(struct adv_ec_ddata *ddata, char *product);
+int ahc1ec_read_adc_value(struct adv_ec_ddata *ddata, unsigned char hwpin,
+ unsigned char multi);
+int ahc1ec_read_acpi_value(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char *pvalue);
+int ahc1ec_write_acpi_value(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char value);
+int ahc1ec_read_hw_ram(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char *data);
+int ahc1ec_write_hw_ram(struct adv_ec_ddata *ddata,
+ unsigned char addr, unsigned char data);
+int ahc1ec_write_hwram_command(struct adv_ec_ddata *ddata, unsigned char data);
+int ahc1ec_read_gpio_status(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char *pvalue);
+int ahc1ec_write_gpio_status(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char value);
+int ahc1ec_read_gpio_dir(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char *pvalue);
+int ahc1ec_write_gpio_dir(struct adv_ec_ddata *ddata, unsigned char pin_number,
+ unsigned char value);
+
+#endif /* __LINUX_AHC1EC0_H */
AHC1EC0 is the embedded controller for Advantech industrial products. This provides core functions in lower layer to access EC chip. Changed in V7: Fix the patch according to reviewer's comment: - move some common functions from drivers/mfd/ahc1ec0.c - add prefix for function name Signed-off-by: Campion Kang <campion.kang@advantech.com.tw> --- drivers/platform/x86/Kconfig | 9 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/ahc1ec0-core.c | 570 ++++++++++++++++++++++++++ include/linux/platform_data/ahc1ec0.h | 279 +++++++++++++ 4 files changed, 859 insertions(+) create mode 100644 drivers/platform/x86/ahc1ec0-core.c create mode 100644 include/linux/platform_data/ahc1ec0.h