@@ -2174,5 +2174,16 @@ config MFD_INTEL_M10_BMC
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_AHC1EC0
+ tristate "Advantech AHC1EC0 Embedded Controller"
+ depends on X86
+ depends on AHC1EC0_CORE
+ select MFD_CORE
+ help
+ Select this to get support for Advantech Embedded Controller sub-devices.
+ This driver will instantiate additional drivers such as HWMON, Watchdog,
+ etc., you also have to select the individual drivers.
+ The controller is running firmware customized for Advantech hardware.
+
endmenu
endif
@@ -271,3 +271,4 @@ obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
+obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
new file mode 100644
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Advantech AHC1EC0 Embedded Controller
+ *
+ * Copyright 2021 Advantech IIoT Group
+ */
+
+#include <linux/acpi.h>
+#include <linux/errno.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/ahc1ec0.h>
+
+/* This order cannot be changed, it is use in enum and may in BIOS ACPI table. */
+enum {
+ ADVEC_ACPI_ID_BRIGHTNESS = 0,
+ ADVEC_ACPI_ID_EEPROM,
+ ADVEC_ACPI_ID_GPIO,
+ ADVEC_ACPI_ID_HWMON,
+ ADVEC_ACPI_ID_LED,
+ ADVEC_ACPI_ID_WDT,
+ ADVEC_ACPI_ID_MAX,
+};
+
+static const struct mfd_cell adv_ec_sub_cells[] = {
+ { .name = "adv-ec-brightness", },
+ { .name = "adv-ec-eeprom", },
+ { .name = "adv-ec-gpio", },
+ { .name = "ahc1ec0-hwmon", },
+ { .name = "adv-ec-led", },
+ { .name = "ahc1ec0-wdt", },
+};
+
+static int adv_ec_init_ec_data(struct adv_ec_ddata *ddata)
+{
+ int ret;
+
+ mutex_init(&ddata->lock);
+
+ /* Get product name */
+ ddata->bios_product_name =
+ devm_kzalloc(ddata->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
+ if (!ddata->bios_product_name)
+ return -ENOMEM;
+
+ ret = adv_ec_get_productname(ddata, ddata->bios_product_name);
+ if (ret)
+ return ret;
+
+ /* Get pin table */
+ ddata->dym_tbl = devm_kzalloc(ddata->dev,
+ EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
+ GFP_KERNEL);
+ if (!ddata->dym_tbl)
+ return -ENOMEM;
+
+ return adv_get_dynamic_tab(ddata);
+}
+
+static int adv_ec_parse_prop(struct adv_ec_ddata *ddata)
+{
+ int ret;
+ u32 value;
+ bool has_watchdog = true;
+
+ /* check whether this EC has the following subdevices, hwmon and watchdog. */
+ if (device_property_read_u32(ddata->dev, "advantech,hwmon-profile", &value) >= 0) {
+ ret = mfd_add_hotplug_devices(ddata->dev,
+ &adv_ec_sub_cells[ADVEC_ACPI_ID_HWMON], 1);
+ if (ret) {
+ dev_err(ddata->dev, "Failed to add %s subdevice: %d\n",
+ adv_ec_sub_cells[ADVEC_ACPI_ID_HWMON].name, ret);
+ } else {
+ dev_info(ddata->dev, "Success to add %s subdevice\n",
+ adv_ec_sub_cells[ADVEC_ACPI_ID_HWMON].name);
+ }
+ } else {
+ dev_err(ddata->dev, "No 'advantech,hwmon-profile' property: %d\n",
+ ret);
+ }
+
+ /* default is true for watchdog even if it is not existed */
+ if (device_property_present(ddata->dev, "advantech,has-watchdog"))
+ has_watchdog = device_property_read_bool(ddata->dev, "advantech,has-watchdog");
+ if (has_watchdog) {
+ ret = mfd_add_hotplug_devices(ddata->dev, &adv_ec_sub_cells[ADVEC_ACPI_ID_WDT], 1);
+ if (ret) {
+ dev_err(ddata->dev, "Failed to add %s subdevice: %d\n",
+ adv_ec_sub_cells[ADVEC_ACPI_ID_WDT].name, ret);
+ } else {
+ dev_info(ddata->dev, "Success to add %s subdevice\n",
+ adv_ec_sub_cells[ADVEC_ACPI_ID_WDT].name);
+ }
+ }
+
+ return 0;
+}
+
+static int adv_ec_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_ddata *ddata;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, ddata);
+ ddata->dev = dev;
+
+ ret = adv_ec_init_ec_data(ddata);
+ if (ret)
+ goto err_prop;
+
+ ret = adv_ec_parse_prop(ddata);
+ if (ret)
+ goto err_prop;
+
+ dev_info(ddata->dev, "Advantech AHC1EC0 probe done");
+
+ return 0;
+
+err_prop:
+ mutex_destroy(&ddata->lock);
+
+ dev_dbg(dev, "Failed to init data and probe\n");
+ return ret;
+}
+
+static int adv_ec_remove(struct platform_device *pdev)
+{
+ struct adv_ec_ddata *ddata;
+
+ ddata = dev_get_drvdata(&pdev->dev);
+
+ mutex_destroy(&ddata->lock);
+ return 0;
+}
+
+static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
+ { .compatible = "advantech,ahc1ec0" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, adv_ec_of_match);
+
+static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
+ { "AHC1EC0", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
+
+static struct platform_driver adv_ec_driver = {
+ .driver = {
+ .name = "ahc1ec0",
+ .of_match_table = of_match_ptr(adv_ec_of_match),
+ .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
+ },
+ .probe = adv_ec_probe,
+ .remove = adv_ec_remove,
+};
+module_platform_driver(adv_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ahc1ec0");
+MODULE_DESCRIPTION("Advantech AHC1EC0 Embedded Controller");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
+MODULE_VERSION("1.0");
AHC1EC0 is the embedded controller for Advantech industrial products. This provides sub-devices such as HWMON and Watchdog, and also exposes functions for sub-devices to read/write the value to embedded controller. Changed in V7: Fix the patch according to reviewer's comment: - donot need to do memory clear since devm_kzalloc() do it internal - rename ADVEC_SUBDEV_{DEVICE} to ADVEC_ACPI_ID_{DEVICE} - move some common functions to drivers/platform/x86/ahc1ec0-core.c - change the data content of ACPI table, use a clear sub-devices name and properties instead of index to start sub-devices - correction of words Changed in V6: - Kconfig: add "AHC1EC0" string to clearly define the EC name - fix the code according to reviewer's suggestion - remove unnecessary header files - change the structure name to lower case, align with others naming Signed-off-by: Campion Kang <campion.kang@advantech.com.tw> --- drivers/mfd/Kconfig | 11 +++ drivers/mfd/Makefile | 1 + drivers/mfd/ahc1ec0.c | 172 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 184 insertions(+) create mode 100644 drivers/mfd/ahc1ec0.c