Message ID | 20221104070358.426657-4-andrej.picej@norik.com (mailing list archive) |
---|---|
State | Handled Elsewhere |
Headers | show |
Series | Suspending i.MX watchdog in WAIT mode | expand |
On Fri, Nov 04, 2022 at 08:03:58AM +0100, Andrej Picej wrote: > It was discovered that the watchdog triggers when the device is put into > "Suspend-To-Idle"/"freeze" low-power mode. Setting WDW bit disables > watchdog when the device is put into WAIT mode. > > Signed-off-by: Andrej Picej <andrej.picej@norik.com> > Reviewed-by: Fabio Estevam <festevam@gmail.com> Applied dts, thanks!
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 3cddc68917a0..5168ed0ffec3 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -102,6 +102,10 @@ &usdhc2 { status = "disabled"; }; +&wdog1 { + fsl,suspend-in-wait; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = <