diff mbox series

[v10,4/4] ARM: dts: wpcm450: Switch clocks to clock controller

Message ID 20240310192108.2747084-5-j.neuschaefer@gmx.net (mailing list archive)
State New
Headers show
Series Nuvoton WPCM450 clock and reset driver | expand

Commit Message

J. Neuschäfer March 10, 2024, 7:21 p.m. UTC
This change is incompatible with older kernels because it requires the
clock controller driver, but I think that's acceptable because WPCM450
support is generally still in an early phase.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

It's probably best to delay merging of this patch until after the driver
is merged; I'm including it here for review, and in case someone want's
to set up a shared branch between the clock and devicetree parts.

v10:
- Reintroducing this patch as part of the clock/reset controller series
---
 .../arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 22 +++++++++----------
 1 file changed, 10 insertions(+), 12 deletions(-)

--
2.43.0
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index 9dfdd8f67319d3..7e3ea8b31151b3 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -2,6 +2,7 @@ 
 // Copyright 2021 Jonathan Neuschäfer

 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/nuvoton,wpcm450-clk.h>

 / {
 	compatible = "nuvoton,wpcm450";
@@ -30,13 +31,6 @@  cpu@0 {
 		};
 	};

-	clk24m: clock-24mhz {
-		/* 24 MHz dummy clock */
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
 	refclk: clock-48mhz {
 		/* 48 MHz reference oscillator */
 		compatible = "fixed-clock";
@@ -70,7 +64,7 @@  serial0: serial@b8000000 {
 			reg = <0xb8000000 0x20>;
 			reg-shift = <2>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk24m>;
+			clocks = <&clk WPCM450_CLK_UART0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&bsp_pins>;
 			status = "disabled";
@@ -81,7 +75,7 @@  serial1: serial@b8000100 {
 			reg = <0xb8000100 0x20>;
 			reg-shift = <2>;
 			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk24m>;
+			clocks = <&clk WPCM450_CLK_UART1>;
 			status = "disabled";
 		};

@@ -89,14 +83,18 @@  timer0: timer@b8001000 {
 			compatible = "nuvoton,wpcm450-timer";
 			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xb8001000 0x1c>;
-			clocks = <&clk24m>;
+			clocks = <&clk WPCM450_CLK_TIMER0>,
+				 <&clk WPCM450_CLK_TIMER1>,
+				 <&clk WPCM450_CLK_TIMER2>,
+				 <&clk WPCM450_CLK_TIMER3>,
+				 <&clk WPCM450_CLK_TIMER4>;
 		};

 		watchdog0: watchdog@b800101c {
 			compatible = "nuvoton,wpcm450-wdt";
 			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xb800101c 0x4>;
-			clocks = <&clk24m>;
+			clocks = <&clk WPCM450_CLK_WDT>;
 		};

 		aic: interrupt-controller@b8002000 {
@@ -480,7 +478,7 @@  fiu: spi-controller@c8000000 {
 			#size-cells = <0>;
 			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
 			reg-names = "control", "memory";
-			clocks = <&clk 0>;
+			clocks = <&clk WPCM450_CLK_FIU>;
 			nuvoton,shm = <&shm>;
 			status = "disabled";
 		};