diff mbox series

[v3] watchdog: stm32_iwdg: Add pretimeout support

Message ID 20240321011207.45388-1-marex@denx.de (mailing list archive)
State New
Headers show
Series [v3] watchdog: stm32_iwdg: Add pretimeout support | expand

Commit Message

Marek Vasut March 21, 2024, 1:11 a.m. UTC
The STM32MP15xx IWDG adds registers which permit this IP to generate
pretimeout interrupt. This interrupt can also be used to wake the CPU
from suspend. Implement support for generating this interrupt and let
userspace configure the pretimeout. In case the pretimeout is not
configured by user, set pretimeout to half of the WDT timeout cycle.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-watchdog@vger.kernel.org
---
V2: - Subtract the pretimeout value from timeout value before writing it
      into the IWDG pretimeout register, because the watchdog counter
      register is counting down, and the pretimeout interrupt triggers
      when watchdog counter register matches the pretimeout register
      content.
    - Set default pretimeout to 3/4 of timeout .
V3: - Use dev instead of pdev->dev
    - Swap order of ret/return 0
    - Split this from the DT changes, which are orthogonal
    - Uh, this patch got stuck in upstreaming queue, sorry
---
 drivers/watchdog/stm32_iwdg.c | 95 ++++++++++++++++++++++++++++++++++-
 1 file changed, 94 insertions(+), 1 deletion(-)

Comments

Clement LE GOFFIC April 15, 2024, 1:10 p.m. UTC | #1
Hello Marek,

On 3/21/24 02:11, Marek Vasut wrote:
> The STM32MP15xx IWDG adds registers which permit this IP to generate
> pretimeout interrupt. This interrupt can also be used to wake the CPU
> from suspend. Implement support for generating this interrupt and let
> userspace configure the pretimeout. In case the pretimeout is not
> configured by user, set pretimeout to half of the WDT timeout cycle.

 From the code below I see that the pretimeout is set to 75% and not 50% 
as you said.
For the rest you can put as you want :
Reviewed-by: Clément Le Goffic <clement.legoffic@foss.st.com>
or
Tested-by: Clément Le Goffic <clement.legoffic@foss.st.com>

> ...
>   
> @@ -88,13 +97,18 @@ static inline void reg_write(void __iomem *base, u32 reg, u32 val)
>   static int stm32_iwdg_start(struct watchdog_device *wdd)
>   {
>   	struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
> -	u32 tout, presc, iwdg_rlr, iwdg_pr, iwdg_sr;
> +	u32 tout, ptot, presc, iwdg_rlr, iwdg_ewcr, iwdg_pr, iwdg_sr;
>   	int ret;
>   
>   	dev_dbg(wdd->parent, "%s\n", __func__);
>   
> +	if (!wdd->pretimeout)
> +		wdd->pretimeout = 3 * wdd->timeout / 4;
> +
> ...
Here is the 75% pretimeout.

Best regards,

Clément
diff mbox series

Patch

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index 5404e03876202..d700e0d49bb95 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -18,6 +18,7 @@ 
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/watchdog.h>
 
 #define DEFAULT_TIMEOUT 10
@@ -28,6 +29,7 @@ 
 #define IWDG_RLR	0x08 /* ReLoad Register */
 #define IWDG_SR		0x0C /* Status Register */
 #define IWDG_WINR	0x10 /* Windows Register */
+#define IWDG_EWCR	0x14 /* Early Wake-up Register */
 
 /* IWDG_KR register bit mask */
 #define KR_KEY_RELOAD	0xAAAA /* reload counter enable */
@@ -47,22 +49,29 @@ 
 #define SR_PVU	BIT(0) /* Watchdog prescaler value update */
 #define SR_RVU	BIT(1) /* Watchdog counter reload value update */
 
+#define EWCR_EWIT	GENMASK(11, 0) /* Watchdog counter window value */
+#define EWCR_EWIC	BIT(14) /* Watchdog early interrupt acknowledge */
+#define EWCR_EWIE	BIT(15) /* Watchdog early interrupt enable */
+
 /* set timeout to 100000 us */
 #define TIMEOUT_US	100000
 #define SLEEP_US	1000
 
 struct stm32_iwdg_data {
 	bool has_pclk;
+	bool has_early_wakeup;
 	u32 max_prescaler;
 };
 
 static const struct stm32_iwdg_data stm32_iwdg_data = {
 	.has_pclk = false,
+	.has_early_wakeup = false,
 	.max_prescaler = 256,
 };
 
 static const struct stm32_iwdg_data stm32mp1_iwdg_data = {
 	.has_pclk = true,
+	.has_early_wakeup = true,
 	.max_prescaler = 1024,
 };
 
@@ -88,13 +97,18 @@  static inline void reg_write(void __iomem *base, u32 reg, u32 val)
 static int stm32_iwdg_start(struct watchdog_device *wdd)
 {
 	struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
-	u32 tout, presc, iwdg_rlr, iwdg_pr, iwdg_sr;
+	u32 tout, ptot, presc, iwdg_rlr, iwdg_ewcr, iwdg_pr, iwdg_sr;
 	int ret;
 
 	dev_dbg(wdd->parent, "%s\n", __func__);
 
+	if (!wdd->pretimeout)
+		wdd->pretimeout = 3 * wdd->timeout / 4;
+
 	tout = clamp_t(unsigned int, wdd->timeout,
 		       wdd->min_timeout, wdd->max_hw_heartbeat_ms / 1000);
+	ptot = clamp_t(unsigned int, tout - wdd->pretimeout,
+		       wdd->min_timeout, tout);
 
 	presc = DIV_ROUND_UP(tout * wdt->rate, RLR_MAX + 1);
 
@@ -102,6 +116,7 @@  static int stm32_iwdg_start(struct watchdog_device *wdd)
 	presc = roundup_pow_of_two(presc);
 	iwdg_pr = presc <= 1 << PR_SHIFT ? 0 : ilog2(presc) - PR_SHIFT;
 	iwdg_rlr = ((tout * wdt->rate) / presc) - 1;
+	iwdg_ewcr = ((ptot * wdt->rate) / presc) - 1;
 
 	/* enable write access */
 	reg_write(wdt->regs, IWDG_KR, KR_KEY_EWA);
@@ -109,6 +124,8 @@  static int stm32_iwdg_start(struct watchdog_device *wdd)
 	/* set prescaler & reload registers */
 	reg_write(wdt->regs, IWDG_PR, iwdg_pr);
 	reg_write(wdt->regs, IWDG_RLR, iwdg_rlr);
+	if (wdt->data->has_early_wakeup)
+		reg_write(wdt->regs, IWDG_EWCR, iwdg_ewcr | EWCR_EWIE);
 	reg_write(wdt->regs, IWDG_KR, KR_KEY_ENABLE);
 
 	/* wait for the registers to be updated (max 100ms) */
@@ -151,6 +168,34 @@  static int stm32_iwdg_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static int stm32_iwdg_set_pretimeout(struct watchdog_device *wdd,
+				     unsigned int pretimeout)
+{
+	dev_dbg(wdd->parent, "%s pretimeout: %d sec\n", __func__, pretimeout);
+
+	wdd->pretimeout = pretimeout;
+
+	if (watchdog_active(wdd))
+		return stm32_iwdg_start(wdd);
+
+	return 0;
+}
+
+static irqreturn_t stm32_iwdg_isr(int irq, void *wdog_arg)
+{
+	struct watchdog_device *wdd = wdog_arg;
+	struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
+	u32 reg;
+
+	reg = reg_read(wdt->regs, IWDG_EWCR);
+	reg |= EWCR_EWIC;
+	reg_write(wdt->regs, IWDG_EWCR, reg);
+
+	watchdog_notify_pretimeout(wdd);
+
+	return IRQ_HANDLED;
+}
+
 static void stm32_clk_disable_unprepare(void *data)
 {
 	clk_disable_unprepare(data);
@@ -207,11 +252,20 @@  static const struct watchdog_info stm32_iwdg_info = {
 	.identity	= "STM32 Independent Watchdog",
 };
 
+static const struct watchdog_info stm32_iwdg_preinfo = {
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_PRETIMEOUT,
+	.identity	= "STM32 Independent Watchdog",
+};
+
 static const struct watchdog_ops stm32_iwdg_ops = {
 	.owner		= THIS_MODULE,
 	.start		= stm32_iwdg_start,
 	.ping		= stm32_iwdg_ping,
 	.set_timeout	= stm32_iwdg_set_timeout,
+	.set_pretimeout	= stm32_iwdg_set_pretimeout,
 };
 
 static const struct of_device_id stm32_iwdg_of_match[] = {
@@ -221,6 +275,40 @@  static const struct of_device_id stm32_iwdg_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
 
+static int stm32_iwdg_irq_init(struct platform_device *pdev,
+			       struct stm32_iwdg *wdt)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct watchdog_device *wdd = &wdt->wdd;
+	struct device *dev = &pdev->dev;
+	int irq, ret;
+
+	if (!wdt->data->has_early_wakeup)
+		return 0;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return 0;
+
+	if (of_property_read_bool(np, "wakeup-source")) {
+		ret = device_init_wakeup(dev, true);
+		if (ret)
+			return ret;
+
+		ret = dev_pm_set_wake_irq(dev, irq);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_request_irq(dev, irq, stm32_iwdg_isr, 0,
+			       dev_name(dev), wdd);
+	if (ret)
+		return ret;
+
+	wdd->info = &stm32_iwdg_preinfo;
+	return 0;
+}
+
 static int stm32_iwdg_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -255,6 +343,11 @@  static int stm32_iwdg_probe(struct platform_device *pdev)
 	wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler *
 				    1000) / wdt->rate;
 
+	/* Initialize IRQ, this might override wdd->info, hence it is here. */
+	ret = stm32_iwdg_irq_init(pdev, wdt);
+	if (ret)
+		return ret;
+
 	watchdog_set_drvdata(wdd, wdt);
 	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
 	watchdog_init_timeout(wdd, 0, dev);