| Message ID | 20240428142937.785925-2-peteryin.openbmc@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | drivers: watchdog: revise watchdog bootstatus | expand |
Hi Peter, Thanks for reworking the patch to reduce the branching in probe(), it looks a lot tidier. First, regarding the patch subject, looking at recent changes to the watchdog subsystem the desired pattern appears to be `watchdog: <controller>: <description>`. I expect you should change it to `watchdog: aspeed: Revise handling of bootstatus`. Currently the subject contains `drivers: ` which feels a bit redundant, and fails to mention `aspeed`, which will bound the scope of the patch for people skimming the mailing list. I have a bit of feedback below. It looks like a lot but mostly it's nitpicking at how we're naming things. Maybe the comments are a bit subjective but I think addressing them will help provide consistency for readers of the code. On Sun, 2024-04-28 at 22:29 +0800, Peter Yin wrote: > Regarding the AST2600 specification, the WDTn Timeout Status Register > (WDT10) has bit 1 reserved. Bit 1 of the status register indicates > on ast2500 if the boot was from the second boot source. > It does not indicate that the most recent reset was triggered by > the watchdog. The code should just be changed to set WDIOF_CARDRESET > if bit 0 of the status register is set. However, this bit can be clear when > watchdog register 0x0c bit1(Reset System after timeout) is enabled. > Thereforce include SCU register to veriy WDIOF_EXTERN1 and WDIOF_CARDRESET > in ast2600 SCU74 or ast2400/ast2500 SCU3C. > > Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> > --- > drivers/watchdog/aspeed_wdt.c | 78 +++++++++++++++++++++++++++++++---- > 1 file changed, 70 insertions(+), 8 deletions(-) > > diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c > index b4773a6aaf8c..4393625c2e96 100644 > --- a/drivers/watchdog/aspeed_wdt.c > +++ b/drivers/watchdog/aspeed_wdt.c > @@ -11,10 +11,12 @@ > #include <linux/io.h> > #include <linux/kernel.h> > #include <linux/kstrtox.h> > +#include <linux/mfd/syscon.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_irq.h> > #include <linux/platform_device.h> > +#include <linux/regmap.h> > #include <linux/watchdog.h> > > static bool nowayout = WATCHDOG_NOWAYOUT; > @@ -22,10 +24,32 @@ module_param(nowayout, bool, 0); > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > > +//AST SCU Register Can you unpack in the comment which register this refers to? Also I have a mild preference for `/* */-style comments and against the `//`- style comments, but I won't hold the patch up on it. > +#define POWERON_RESET_FLAG BIT(0) > +#define EXTERN_RESET_FLAG BIT(1) IMO an `AST_` prefix would be helpful. At least, it would help me orient myself when reading use of the macro in the code. Further, can we include `SCU` in the symbol name to indicate we're not actually referring to a register in the WDT controller (and update the register and flag macros below as well)? Finally, including an indication of the register name (System Reset Control/Status Register for the AST2500, System Reset Status Register for the AST2600) is helpful too: Perhaps: ``` #define AST_SCU_SYS_RESET_POWERON_FLAG ... #define AST_SCU_SYS_RESET_EXTERN_FLAG ... ``` I'd like to see these approaches applied to the other macros you've introduced as well. > + > +#define AST2400_AST2500_SYSTEM_RESET_EVENT 0x3C If the AST2500 register offset is compatible with the AST2400 then IMO you can drop `_AST2500` from the macro name. The location of relevance for a potential bug is the assignment into the `reset_event` struct member below, which is straight-forward to inspect for correctness. With the prior requests in mind I'd propose: ``` #define AST2400_SCU_SYS_RESET_STATUS ... ``` > +#define AST2400_WATCHDOG_RESET_FLAG BIT(1) > +#define AST2400_RESET_FLAG_CLEAR GENMASK(2, 0) > + > +#define AST2500_WATCHDOG_RESET_FLAG GENMASK(4, 2) While the individual bits in the register are flags, we're extracting a collection of the bits from the register. My feeling is that we should s/_FLAG/_MASK/ in the macro names, including `AST2400_WATCHDOG_RESET_FLAG` for consistency (even though it is only a single-bit mask). > +#define AST2500_RESET_FLAG_CLEAR (AST2500_WATCHDOG_RESET_FLAG | \ > + POWERON_RESET_FLAG | EXTERN_RESET_FLAG) > + > +#define AST2600_SYSTEM_RESET_EVENT 0x74 > +#define AST2600_WATCHDOG_RESET_FLAG GENMASK(31, 16) > +#define AST2600_RESET_FLAG_CLEAR (AST2600_WATCHDOG_RESET_FLAG | \ > + POWERON_RESET_FLAG | EXTERN_RESET_FLAG) > + > struct aspeed_wdt_config { > u32 ext_pulse_width_mask; > u32 irq_shift; > u32 irq_mask; > + const char *compatible; Hmm, a compatible string for what though? From the looks of the code, this is for the SCU. I think it would be be helpful to prefix this with `scu_` to make it clear, though see the struct-style consideration below. > + u32 reset_event; The datasheets refer to the register as 'status' and not 'event', so I suggest we use `reset_status` here. I also prefer we suffix this with `_reg` to actively differentiate it from the other field types (_flag) we're defining (so `reset_status_reg`. > + u32 watchdog_reset_flag; > + u32 extern_reset_flag; s/_flag/_mask/ if we have consensus on that macro name discussion above. > + u32 reset_flag_clear; I'd prefix these with `scu_` as well. Or perhaps a nested struct? struct aspeed_wdt_config { ... struct { const char *compatible; u32 reset_event_reg; u32 watchdog_reset_mask; u32 extern_reset_mask; u32 reset_flag_clear; } scu; That way the accesses look like wdt->cfg->scu.reset_event_reg` and provide some context via the type system instead of deferring to object naming convention. > }; > > struct aspeed_wdt { > @@ -39,18 +63,33 @@ static const struct aspeed_wdt_config ast2400_config = { > .ext_pulse_width_mask = 0xff, > .irq_shift = 0, > .irq_mask = 0, > + .compatible = "aspeed,ast2400-scu", > + .reset_event = AST2400_AST2500_SYSTEM_RESET_EVENT, > + .watchdog_reset_flag = AST2400_WATCHDOG_RESET_FLAG, > + .extern_reset_flag = 0, > + .reset_flag_clear = AST2400_RESET_FLAG_CLEAR, > }; > > static const struct aspeed_wdt_config ast2500_config = { > .ext_pulse_width_mask = 0xfffff, > .irq_shift = 12, > .irq_mask = GENMASK(31, 12), > + .compatible = "aspeed,ast2500-scu", > + .reset_event = AST2400_AST2500_SYSTEM_RESET_EVENT, > + .watchdog_reset_flag = AST2500_WATCHDOG_RESET_FLAG, > + .extern_reset_flag = EXTERN_RESET_FLAG, > + .reset_flag_clear = AST2500_RESET_FLAG_CLEAR, > }; > > static const struct aspeed_wdt_config ast2600_config = { > .ext_pulse_width_mask = 0xfffff, > .irq_shift = 0, > .irq_mask = GENMASK(31, 10), > + .compatible = "aspeed,ast2600-scu", > + .reset_event = AST2600_SYSTEM_RESET_EVENT, > + .watchdog_reset_flag = AST2600_WATCHDOG_RESET_FLAG, > + .extern_reset_flag = EXTERN_RESET_FLAG, > + .reset_flag_clear = AST2600_RESET_FLAG_CLEAR, > }; > > static const struct of_device_id aspeed_wdt_of_table[] = { > @@ -310,6 +349,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev) > const struct of_device_id *ofdid; > struct aspeed_wdt *wdt; > struct device_node *np; > + struct regmap *scu_base; I don't think it's necessary to have the `_base` suffix as we're not dealing directly with a mapped address. > const char *reset_type; > u32 duration; > u32 status; > @@ -458,14 +498,36 @@ static int aspeed_wdt_probe(struct platform_device *pdev) > writel(duration - 1, wdt->base + WDT_RESET_WIDTH); > } > > - status = readl(wdt->base + WDT_TIMEOUT_STATUS); > - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) { Dropping this condition suggests the patch is a fix. Has there been any discussion of adding a Fixes: tag? Andrew
Hi Andrew,
I am not sure how to add the Fixes tag, Is it like this?
Fixes: 6a6c7b006e5c (watchdog: aspeed: Add support for
aspeed,reset-mask DT property).
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Is it the correct commit ID or should I base on which commit ID?
Thanks,
Peter.
On Mon, Apr 29, 2024 at 9:50 AM Andrew Jeffery
<andrew@codeconstruct.com.au> wrote:
>
> Hi Peter,
>
> Thanks for reworking the patch to reduce the branching in probe(), it
> looks a lot tidier.
>
> First, regarding the patch subject, looking at recent changes to the
> watchdog subsystem the desired pattern appears to be `watchdog:
> <controller>: <description>`. I expect you should change it to
> `watchdog: aspeed: Revise handling of bootstatus`. Currently the
> subject contains `drivers: ` which feels a bit redundant, and fails to
> mention `aspeed`, which will bound the scope of the patch for people
> skimming the mailing list.
>
> I have a bit of feedback below. It looks like a lot but mostly it's
> nitpicking at how we're naming things. Maybe the comments are a bit
> subjective but I think addressing them will help provide consistency
> for readers of the code.
>
> On Sun, 2024-04-28 at 22:29 +0800, Peter Yin wrote:
> > Regarding the AST2600 specification, the WDTn Timeout Status Register
> > (WDT10) has bit 1 reserved. Bit 1 of the status register indicates
> > on ast2500 if the boot was from the second boot source.
> > It does not indicate that the most recent reset was triggered by
> > the watchdog. The code should just be changed to set WDIOF_CARDRESET
> > if bit 0 of the status register is set. However, this bit can be clear when
> > watchdog register 0x0c bit1(Reset System after timeout) is enabled.
> > Thereforce include SCU register to veriy WDIOF_EXTERN1 and WDIOF_CARDRESET
> > in ast2600 SCU74 or ast2400/ast2500 SCU3C.
> >
> > Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
> > ---
> > drivers/watchdog/aspeed_wdt.c | 78 +++++++++++++++++++++++++++++++----
> > 1 file changed, 70 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
> > index b4773a6aaf8c..4393625c2e96 100644
> > --- a/drivers/watchdog/aspeed_wdt.c
> > +++ b/drivers/watchdog/aspeed_wdt.c
> > @@ -11,10 +11,12 @@
> > #include <linux/io.h>
> > #include <linux/kernel.h>
> > #include <linux/kstrtox.h>
> > +#include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> > #include <linux/of.h>
> > #include <linux/of_irq.h>
> > #include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > #include <linux/watchdog.h>
> >
> > static bool nowayout = WATCHDOG_NOWAYOUT;
> > @@ -22,10 +24,32 @@ module_param(nowayout, bool, 0);
> > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> >
> > +//AST SCU Register
>
> Can you unpack in the comment which register this refers to? Also I
> have a mild preference for `/* */-style comments and against the `//`-
> style comments, but I won't hold the patch up on it.
>
> > +#define POWERON_RESET_FLAG BIT(0)
> > +#define EXTERN_RESET_FLAG BIT(1)
>
> IMO an `AST_` prefix would be helpful. At least, it would help me
> orient myself when reading use of the macro in the code.
>
> Further, can we include `SCU` in the symbol name to indicate we're not
> actually referring to a register in the WDT controller (and update the
> register and flag macros below as well)?
>
> Finally, including an indication of the register name (System Reset
> Control/Status Register for the AST2500, System Reset Status Register
> for the AST2600) is helpful too:
>
> Perhaps:
>
> ```
> #define AST_SCU_SYS_RESET_POWERON_FLAG ...
> #define AST_SCU_SYS_RESET_EXTERN_FLAG ...
> ```
>
> I'd like to see these approaches applied to the other macros you've
> introduced as well.
>
> > +
> > +#define AST2400_AST2500_SYSTEM_RESET_EVENT 0x3C
>
> If the AST2500 register offset is compatible with the AST2400 then IMO
> you can drop `_AST2500` from the macro name. The location of relevance
> for a potential bug is the assignment into the `reset_event` struct
> member below, which is straight-forward to inspect for correctness.
>
> With the prior requests in mind I'd propose:
>
> ```
> #define AST2400_SCU_SYS_RESET_STATUS ...
> ```
>
> > +#define AST2400_WATCHDOG_RESET_FLAG BIT(1)
> > +#define AST2400_RESET_FLAG_CLEAR GENMASK(2, 0)
> > +
> > +#define AST2500_WATCHDOG_RESET_FLAG GENMASK(4, 2)
>
> While the individual bits in the register are flags, we're extracting a
> collection of the bits from the register. My feeling is that we should
> s/_FLAG/_MASK/ in the macro names, including
> `AST2400_WATCHDOG_RESET_FLAG` for consistency (even though it is only a
> single-bit mask).
>
> > +#define AST2500_RESET_FLAG_CLEAR (AST2500_WATCHDOG_RESET_FLAG | \
> > + POWERON_RESET_FLAG | EXTERN_RESET_FLAG)
> > +
> > +#define AST2600_SYSTEM_RESET_EVENT 0x74
> > +#define AST2600_WATCHDOG_RESET_FLAG GENMASK(31, 16)
> > +#define AST2600_RESET_FLAG_CLEAR (AST2600_WATCHDOG_RESET_FLAG | \
> > + POWERON_RESET_FLAG | EXTERN_RESET_FLAG)
> > +
> > struct aspeed_wdt_config {
> > u32 ext_pulse_width_mask;
> > u32 irq_shift;
> > u32 irq_mask;
> > + const char *compatible;
>
> Hmm, a compatible string for what though? From the looks of the code,
> this is for the SCU. I think it would be be helpful to prefix this with
> `scu_` to make it clear, though see the struct-style consideration
> below.
>
> > + u32 reset_event;
>
> The datasheets refer to the register as 'status' and not 'event', so I
> suggest we use `reset_status` here. I also prefer we suffix this with
> `_reg` to actively differentiate it from the other field types (_flag)
> we're defining (so `reset_status_reg`.
>
> > + u32 watchdog_reset_flag;
> > + u32 extern_reset_flag;
>
> s/_flag/_mask/ if we have consensus on that macro name discussion
> above.
>
> > + u32 reset_flag_clear;
>
> I'd prefix these with `scu_` as well. Or perhaps a nested struct?
>
> struct aspeed_wdt_config {
> ...
> struct {
> const char *compatible;
> u32 reset_event_reg;
> u32 watchdog_reset_mask;
> u32 extern_reset_mask;
> u32 reset_flag_clear;
> } scu;
>
> That way the accesses look like wdt->cfg->scu.reset_event_reg` and
> provide some context via the type system instead of deferring to object
> naming convention.
>
> > };
> >
> > struct aspeed_wdt {
> > @@ -39,18 +63,33 @@ static const struct aspeed_wdt_config ast2400_config = {
> > .ext_pulse_width_mask = 0xff,
> > .irq_shift = 0,
> > .irq_mask = 0,
> > + .compatible = "aspeed,ast2400-scu",
> > + .reset_event = AST2400_AST2500_SYSTEM_RESET_EVENT,
> > + .watchdog_reset_flag = AST2400_WATCHDOG_RESET_FLAG,
> > + .extern_reset_flag = 0,
> > + .reset_flag_clear = AST2400_RESET_FLAG_CLEAR,
> > };
> >
> > static const struct aspeed_wdt_config ast2500_config = {
> > .ext_pulse_width_mask = 0xfffff,
> > .irq_shift = 12,
> > .irq_mask = GENMASK(31, 12),
> > + .compatible = "aspeed,ast2500-scu",
> > + .reset_event = AST2400_AST2500_SYSTEM_RESET_EVENT,
> > + .watchdog_reset_flag = AST2500_WATCHDOG_RESET_FLAG,
> > + .extern_reset_flag = EXTERN_RESET_FLAG,
> > + .reset_flag_clear = AST2500_RESET_FLAG_CLEAR,
> > };
> >
> > static const struct aspeed_wdt_config ast2600_config = {
> > .ext_pulse_width_mask = 0xfffff,
> > .irq_shift = 0,
> > .irq_mask = GENMASK(31, 10),
> > + .compatible = "aspeed,ast2600-scu",
> > + .reset_event = AST2600_SYSTEM_RESET_EVENT,
> > + .watchdog_reset_flag = AST2600_WATCHDOG_RESET_FLAG,
> > + .extern_reset_flag = EXTERN_RESET_FLAG,
> > + .reset_flag_clear = AST2600_RESET_FLAG_CLEAR,
> > };
> >
> > static const struct of_device_id aspeed_wdt_of_table[] = {
> > @@ -310,6 +349,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> > const struct of_device_id *ofdid;
> > struct aspeed_wdt *wdt;
> > struct device_node *np;
> > + struct regmap *scu_base;
>
> I don't think it's necessary to have the `_base` suffix as we're not
> dealing directly with a mapped address.
>
> > const char *reset_type;
> > u32 duration;
> > u32 status;
> > @@ -458,14 +498,36 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> > writel(duration - 1, wdt->base + WDT_RESET_WIDTH);
> > }
> >
> > - status = readl(wdt->base + WDT_TIMEOUT_STATUS);
> > - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) {
>
> Dropping this condition suggests the patch is a fix. Has there been any
> discussion of adding a Fixes: tag?
>
> Andrew
On Mon, 2024-04-29 at 22:54 +0800, Peter Yin wrote: > Hi Andrew, > I am not sure how to add the Fixes tag, Is it like this? > > Fixes: 6a6c7b006e5c (watchdog: aspeed: Add support for > aspeed,reset-mask DT property). Approximately, yes, but it must not be wrapped. Some more info is provided in the submitting-patches documentation: https://docs.kernel.org/process/submitting-patches.html#describe-your-changes > Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> > > Is it the correct commit ID or should I base on which commit ID? > The correct commit ID to use is the one that introduces the problem. Using `git blame drivers/watchdog/aspeed_wdt.c` it appears you're changing the behaviour that was introduced in 49d4d277ca54 ("aspeed: watchdog: Set bootstatus during probe"): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=49d4d277ca54e04170d39484c8758a0ea9bca37d Andrew
Hi Andrew, Thanks, I am going to fix it in V9. On Tue, Apr 30, 2024 at 9:38 AM Andrew Jeffery <andrew@codeconstruct.com.au> wrote: > > On Mon, 2024-04-29 at 22:54 +0800, Peter Yin wrote: > > Hi Andrew, > > I am not sure how to add the Fixes tag, Is it like this? > > > > Fixes: 6a6c7b006e5c (watchdog: aspeed: Add support for > > aspeed,reset-mask DT property). > > Approximately, yes, but it must not be wrapped. > > Some more info is provided in the submitting-patches documentation: > > https://docs.kernel.org/process/submitting-patches.html#describe-your-changes > > > Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> > > > > Is it the correct commit ID or should I base on which commit ID? > > > > The correct commit ID to use is the one that introduces the problem. > Using `git blame drivers/watchdog/aspeed_wdt.c` it appears you're > changing the behaviour that was introduced in 49d4d277ca54 ("aspeed: > watchdog: Set bootstatus during probe"): > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=49d4d277ca54e04170d39484c8758a0ea9bca37d > > Andrew
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c index b4773a6aaf8c..4393625c2e96 100644 --- a/drivers/watchdog/aspeed_wdt.c +++ b/drivers/watchdog/aspeed_wdt.c @@ -11,10 +11,12 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/kstrtox.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/watchdog.h> static bool nowayout = WATCHDOG_NOWAYOUT; @@ -22,10 +24,32 @@ module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +//AST SCU Register +#define POWERON_RESET_FLAG BIT(0) +#define EXTERN_RESET_FLAG BIT(1) + +#define AST2400_AST2500_SYSTEM_RESET_EVENT 0x3C +#define AST2400_WATCHDOG_RESET_FLAG BIT(1) +#define AST2400_RESET_FLAG_CLEAR GENMASK(2, 0) + +#define AST2500_WATCHDOG_RESET_FLAG GENMASK(4, 2) +#define AST2500_RESET_FLAG_CLEAR (AST2500_WATCHDOG_RESET_FLAG | \ + POWERON_RESET_FLAG | EXTERN_RESET_FLAG) + +#define AST2600_SYSTEM_RESET_EVENT 0x74 +#define AST2600_WATCHDOG_RESET_FLAG GENMASK(31, 16) +#define AST2600_RESET_FLAG_CLEAR (AST2600_WATCHDOG_RESET_FLAG | \ + POWERON_RESET_FLAG | EXTERN_RESET_FLAG) + struct aspeed_wdt_config { u32 ext_pulse_width_mask; u32 irq_shift; u32 irq_mask; + const char *compatible; + u32 reset_event; + u32 watchdog_reset_flag; + u32 extern_reset_flag; + u32 reset_flag_clear; }; struct aspeed_wdt { @@ -39,18 +63,33 @@ static const struct aspeed_wdt_config ast2400_config = { .ext_pulse_width_mask = 0xff, .irq_shift = 0, .irq_mask = 0, + .compatible = "aspeed,ast2400-scu", + .reset_event = AST2400_AST2500_SYSTEM_RESET_EVENT, + .watchdog_reset_flag = AST2400_WATCHDOG_RESET_FLAG, + .extern_reset_flag = 0, + .reset_flag_clear = AST2400_RESET_FLAG_CLEAR, }; static const struct aspeed_wdt_config ast2500_config = { .ext_pulse_width_mask = 0xfffff, .irq_shift = 12, .irq_mask = GENMASK(31, 12), + .compatible = "aspeed,ast2500-scu", + .reset_event = AST2400_AST2500_SYSTEM_RESET_EVENT, + .watchdog_reset_flag = AST2500_WATCHDOG_RESET_FLAG, + .extern_reset_flag = EXTERN_RESET_FLAG, + .reset_flag_clear = AST2500_RESET_FLAG_CLEAR, }; static const struct aspeed_wdt_config ast2600_config = { .ext_pulse_width_mask = 0xfffff, .irq_shift = 0, .irq_mask = GENMASK(31, 10), + .compatible = "aspeed,ast2600-scu", + .reset_event = AST2600_SYSTEM_RESET_EVENT, + .watchdog_reset_flag = AST2600_WATCHDOG_RESET_FLAG, + .extern_reset_flag = EXTERN_RESET_FLAG, + .reset_flag_clear = AST2600_RESET_FLAG_CLEAR, }; static const struct of_device_id aspeed_wdt_of_table[] = { @@ -310,6 +349,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev) const struct of_device_id *ofdid; struct aspeed_wdt *wdt; struct device_node *np; + struct regmap *scu_base; const char *reset_type; u32 duration; u32 status; @@ -458,14 +498,36 @@ static int aspeed_wdt_probe(struct platform_device *pdev) writel(duration - 1, wdt->base + WDT_RESET_WIDTH); } - status = readl(wdt->base + WDT_TIMEOUT_STATUS); - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) { - wdt->wdd.bootstatus = WDIOF_CARDRESET; - - if (of_device_is_compatible(np, "aspeed,ast2400-wdt") || - of_device_is_compatible(np, "aspeed,ast2500-wdt")) - wdt->wdd.groups = bswitch_groups; - } + /* + * Power on reset is set when triggered by AC or SRSRST. + * Thereforce, we clear flag to ensure + * next boot cause is a real watchdog case. + * We use the external reset flag to determine + * if it is an external reset or card reset. + * However, The ast2400 watchdog flag is cleared by an external reset, + * so it only supports WDIOF_CARDRESET. + */ + scu_base = syscon_regmap_lookup_by_compatible(wdt->cfg->compatible); + if (IS_ERR(scu_base)) + return PTR_ERR(scu_base); + + ret = regmap_read(scu_base, wdt->cfg->reset_event, &status); + if (ret) + return ret; + + if (!(status & POWERON_RESET_FLAG) && + status & wdt->cfg->watchdog_reset_flag) + wdt->wdd.bootstatus = (status & wdt->cfg->extern_reset_flag) ? + WDIOF_EXTERN1 : WDIOF_CARDRESET; + + status = wdt->cfg->reset_flag_clear; + ret = regmap_write(scu_base, wdt->cfg->reset_event, status); + if (ret) + return ret; + + if (of_device_is_compatible(np, "aspeed,ast2400-wdt") || + of_device_is_compatible(np, "aspeed,ast2500-wdt")) + wdt->wdd.groups = bswitch_groups; dev_set_drvdata(dev, wdt);
Regarding the AST2600 specification, the WDTn Timeout Status Register (WDT10) has bit 1 reserved. Bit 1 of the status register indicates on ast2500 if the boot was from the second boot source. It does not indicate that the most recent reset was triggered by the watchdog. The code should just be changed to set WDIOF_CARDRESET if bit 0 of the status register is set. However, this bit can be clear when watchdog register 0x0c bit1(Reset System after timeout) is enabled. Thereforce include SCU register to veriy WDIOF_EXTERN1 and WDIOF_CARDRESET in ast2600 SCU74 or ast2400/ast2500 SCU3C. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- drivers/watchdog/aspeed_wdt.c | 78 +++++++++++++++++++++++++++++++---- 1 file changed, 70 insertions(+), 8 deletions(-)