diff mbox series

[1/5] mfd: add Congatec Board Controller mfd driver

Message ID 20240503-congatec-board-controller-v1-1-fec5236270e7@bootlin.com (mailing list archive)
State New
Headers show
Series Congatec Board Controller drivers | expand

Commit Message

Thomas Richard Aug. 9, 2024, 2:52 p.m. UTC
Add core MFD driver for the Board Controller found on some Congatec SMARC
module. This Board Controller provides functions like watchdog, GPIO, and
I2C busses.

This commit add support only for the conga-SA7 module.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/mfd/Kconfig      |  12 ++
 drivers/mfd/Makefile     |   1 +
 drivers/mfd/cgbc-core.c  | 453 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/cgbc.h |  44 +++++
 4 files changed, 510 insertions(+)

Comments

Lee Jones Aug. 22, 2024, 10:38 a.m. UTC | #1
On Fri, 09 Aug 2024, Thomas Richard wrote:

> Add core MFD driver for the Board Controller found on some Congatec SMARC
> module. This Board Controller provides functions like watchdog, GPIO, and
> I2C busses.
> 
> This commit add support only for the conga-SA7 module.
> 
> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
> ---
>  drivers/mfd/Kconfig      |  12 ++
>  drivers/mfd/Makefile     |   1 +
>  drivers/mfd/cgbc-core.c  | 453 +++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/cgbc.h |  44 +++++
>  4 files changed, 510 insertions(+)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index bc8be2e593b6..3e0530f30267 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -224,6 +224,18 @@ config MFD_AXP20X_RSB
>  	  components like regulators or the PEK (Power Enable Key) under the
>  	  corresponding menus.
>  
> +config MFD_CGBC
> +	tristate "Congatec Board Controller"
> +	select MFD_CORE
> +	depends on X86
> +	help
> +	  This is the core driver of the Board Controller found on some Congatec
> +	  SMARC modules. The Board Controller provides functions like watchdog,
> +	  I2C busses, and GPIO controller.
> +
> +	  To compile this driver as a module, choose M here: the module will be
> +	  called cgbc-core.
> +
>  config MFD_CROS_EC_DEV
>  	tristate "ChromeOS Embedded Controller multifunction device"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 02b651cd7535..d5da3fcd691c 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
>  obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
>  obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
> +obj-$(CONFIG_MFD_CGBC)		+= cgbc-core.o
>  obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
>  obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
>  obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
> diff --git a/drivers/mfd/cgbc-core.c b/drivers/mfd/cgbc-core.c
> new file mode 100644
> index 000000000000..cca9b1170cc9
> --- /dev/null
> +++ b/drivers/mfd/cgbc-core.c
> @@ -0,0 +1,453 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Congatec Board Controller MFD core driver.

No such thing as an MFD.

> + * The x86 Congatec modules have an embedded micro controller named Board
> + * Controller.

I think the '\n' can be dropped without issue.

> + * This Board Controller have a watchdog timer, some GPIOs, and two i2c busses.

"has a"

Consider "Watchdog"

"I2C"

> + *
> + * Copyright (C) 2024 Bootlin

Nit: '\n' here.

> + * Author: Thomas Richard <thomas.richard@bootlin.com>
> + */
> +
> +#include <linux/dmi.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/cgbc.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/iopoll.h>
> +#include <linux/sysfs.h>

Alphabetical.

> +#define CGBC_MASK_STATUS        (BIT(6) | BIT(7))
> +#define CGBC_MASK_DATA_COUNT	0x1F
> +#define CGBC_MASK_ERROR_CODE	0x1F

Not sure if it's just my mailer, but if all of these are not already
aligned, please can you tab them out so that they are.

> +#define CGBC_STATUS_DATA_READY	0x00
> +#define CGBC_STATUS_CMD_READY	BIT(6)
> +#define CGBC_STATUS_ERROR	(BIT(6) | BIT(7))
> +
> +#define CGBC_CMD_GET_FW_REV	0x21
> +
> +#define CGBC_IO_SESSION_BASE	0x0E20
> +#define CGBC_IO_SESSION_END	0x0E30
> +#define CGBC_IO_CMD_BASE	0x0E00
> +#define CGBC_IO_CMD_END		0x0E10
> +
> +#define CGBC_SESSION_CMD	0x00
> +#define		CGBC_SESSION_CMD_IDLE		0x00
> +#define		CGBC_SESSION_CMD_REQUEST	0x01
> +#define	CGBC_SESSION_DATA	0x01
> +#define CGBC_SESSION_STATUS	0x02
> +#define		CGBC_SESSION_STATUS_FREE	0x03
> +#define CGBC_SESSION_ACCESS	0x04
> +#define		CGBC_SESSION_ACCESS_GAINED	0x00
> +
> +#define CGBC_SESSION_VALID_MIN  0x02
> +#define CGBC_SESSION_VALID_MAX  0xFE
> +
> +#define CGBC_CMD_STROBE	0x00
> +#define CGBC_CMD_INDEX	0x02
> +#define		CGBC_CMD_INDEX_CBM_MAN8		0x00
> +#define		CGBC_CMD_INDEX_CBM_AUTO32	0x03
> +#define CGBC_CMD_DATA	0x04
> +#define CGBC_CMD_ACCESS	0x0C
> +
> +struct cgbc_platform_data {
> +	const struct resource	*ioresource;
> +	unsigned int		num_ioresource;
> +};

This looks way over engineered.

Why not provide platform_device_info statically in the first place?

> +static struct platform_device *cgbc_pdev;

No avoidable globals.

This stuff should get stored in driver data (ddata)

> +static int cgbc_detect_device(struct cgbc_device_data *cgbc)
> +{
> +	u16 status;
> +	int ret;
> +
> +	ret = readx_poll_timeout(ioread16, cgbc->io_session + CGBC_SESSION_STATUS, status,
> +				 status == CGBC_SESSION_STATUS_FREE, 0, 500000);
> +
> +	if (ret || ioread32(cgbc->io_session + CGBC_SESSION_ACCESS))
> +		ret = -ENODEV;
> +
> +	return ret;
> +}

This function could do with some commentary.

> +static int cgbc_session_command(struct cgbc_device_data *cgbc, u8 cmd)
> +{
> +	int ret;
> +	u8 val;
> +
> +	ret = readx_poll_timeout(ioread8, cgbc->io_session + CGBC_SESSION_CMD, val,
> +				 val == CGBC_SESSION_CMD_IDLE, 0, 100000);
> +	if (ret)
> +		return ret;
> +
> +	iowrite8(cmd, cgbc->io_session + CGBC_SESSION_CMD);
> +
> +	ret = readx_poll_timeout(ioread8, cgbc->io_session + CGBC_SESSION_CMD, val,
> +				 val == CGBC_SESSION_CMD_IDLE, 0, 100000);
> +	if (ret)
> +		return ret;
> +
> +	ret = (int)ioread8(cgbc->io_session + CGBC_SESSION_DATA);
> +
> +	iowrite8(CGBC_SESSION_STATUS_FREE,
> +		 cgbc->io_session + CGBC_SESSION_STATUS);

Which char are you using to line-feed?  This looks inconsistent.

> +
> +	return ret;
> +}
> +
> +static int cgbc_session_request(struct cgbc_device_data *cgbc)
> +{
> +	unsigned int ret = cgbc_detect_device(cgbc);

What does cgbc_detect_device() do?

You're not getting the device?  Just seeing if it's present?

Please separate the declaration from the assignment when calling
functions.

> +	if (ret)
> +		return dev_err_probe(cgbc->dev, ret, "device not found\n");
> +
> +	cgbc->session = cgbc_session_command(cgbc, CGBC_SESSION_CMD_REQUEST);
> +
> +	/* the Board Controller sent us a wrong session handle, we cannot

This is a non-standard multi-line comment.

> +	 * communicate with it.
> +	 */
> +	if (cgbc->session < CGBC_SESSION_VALID_MIN ||
> +	    cgbc->session > CGBC_SESSION_VALID_MAX) {

How are you justifying this line-break and then not line-breaking 2
lines down?

> +		cgbc->session = 0;

Why are we setting variables before bombing out?

> +		return dev_err_probe(cgbc->dev, (cgbc->session < 0) ? cgbc->session : -ECONNREFUSED,

How can (cgbc->session < 0) ever be true?

> +				     "failed to get a valid session handle\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static void cgbc_session_release(struct cgbc_device_data *cgbc)
> +{
> +	if (cgbc_session_command(cgbc, cgbc->session) != cgbc->session)

What does this do?

Are we checking or doing something?  If the latter, then we shouldn't be
doing that in an if() statement.  If the former, then what's the point
of the function?

> +		dev_err(cgbc->dev, "failed to release session\n");

Why print if there isn't anything you can do about it?

> +}
> +
> +static bool cgbc_command_lock(struct cgbc_device_data *cgbc)
> +{
> +	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_ACCESS);
> +
> +	return ioread8(cgbc->io_cmd + CGBC_CMD_ACCESS) == cgbc->session;
> +}
> +
> +static void cgbc_command_unlock(struct cgbc_device_data *cgbc)
> +{
> +	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_ACCESS);
> +}
> +
> +static int __cgbc_command(struct cgbc_device_data *cgbc, u8 *cmd, u8 cmd_size,
> +			  u8 *data, u8 data_size, u8 *status)
> +{
> +	u8 checksum = 0, data_checksum = 0, istatus = 0, val;
> +	int mode_change = -1;
> +	bool lock;
> +	int ret, i;
> +
> +	mutex_lock(&cgbc->lock);
> +
> +	/* request access */

Start comments with uppercase chars please.

> +	ret = readx_poll_timeout(cgbc_command_lock, cgbc, lock, lock, 0, 100000);
> +	if (ret)
> +		goto out;
> +
> +	/* wait board controller is ready */
> +	ret = readx_poll_timeout(ioread8, cgbc->io_cmd + CGBC_CMD_STROBE, val,
> +				 val == CGBC_CMD_STROBE, 0, 100000);
> +	if (ret)
> +		goto release;
> +
> +	/* write command packet */
> +	if (cmd_size <= 2) {
> +		iowrite8(CGBC_CMD_INDEX_CBM_MAN8,
> +			 cgbc->io_cmd + CGBC_CMD_INDEX);
> +	} else {
> +		iowrite8(CGBC_CMD_INDEX_CBM_AUTO32,
> +			 cgbc->io_cmd + CGBC_CMD_INDEX);
> +		if ((cmd_size % 4) != 0x03)
> +			mode_change = (cmd_size & 0xFFFC) - 1;
> +	}
> +
> +	for (i = 0; i < cmd_size; i++) {
> +		iowrite8(cmd[i], cgbc->io_cmd + CGBC_CMD_DATA + (i % 4));
> +		checksum ^= cmd[i];
> +		if (mode_change == i)
> +			iowrite8((i + 1) | CGBC_CMD_INDEX_CBM_MAN8,
> +				 cgbc->io_cmd + CGBC_CMD_INDEX);
> +	}
> +
> +	/* append checksum byte */
> +	iowrite8(checksum, cgbc->io_cmd + CGBC_CMD_DATA + (i % 4));
> +
> +	/* perform command strobe */
> +	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_STROBE);
> +
> +	/* rewind cmd buffer index */
> +	iowrite8(CGBC_CMD_INDEX_CBM_AUTO32,
> +		 cgbc->io_cmd + CGBC_CMD_INDEX);
> +
> +	/* wait command completion */
> +	ret = read_poll_timeout(ioread8, val, val == CGBC_CMD_STROBE, 0,
> +				100000, false,
> +				cgbc->io_cmd + CGBC_CMD_STROBE);
> +	if (ret)
> +		goto release;
> +
> +	istatus = ioread8(cgbc->io_cmd + CGBC_CMD_DATA);
> +	checksum = istatus;
> +
> +	/* check command status */
> +	switch (istatus & CGBC_MASK_STATUS) {
> +	case CGBC_STATUS_DATA_READY:
> +		if (istatus > data_size)
> +			istatus = data_size;
> +		for (i = 0; i < istatus; i++) {
> +			data[i] = ioread8(cgbc->io_cmd +
> +					  CGBC_CMD_DATA + ((i + 1) % 4));
> +			checksum ^= data[i];
> +		}
> +		data_checksum = ioread8(cgbc->io_cmd +
> +					CGBC_CMD_DATA + ((i + 1) % 4));
> +		istatus &= CGBC_MASK_DATA_COUNT;
> +		break;
> +	case CGBC_STATUS_ERROR:
> +	case CGBC_STATUS_CMD_READY:
> +		data_checksum = ioread8(cgbc->io_cmd +
> +					CGBC_CMD_DATA + 1);
> +		if ((istatus & CGBC_MASK_STATUS) == CGBC_STATUS_ERROR)
> +			ret = -EIO;
> +		istatus = istatus & CGBC_MASK_ERROR_CODE;
> +		break;
> +	default:
> +		data_checksum = ioread8(cgbc->io_cmd + CGBC_CMD_DATA + 1);
> +		istatus &= CGBC_MASK_ERROR_CODE;
> +		ret = -EIO;
> +		break;
> +	}
> +
> +	/* checksum verification */
> +	if (ret == 0 && data_checksum != checksum)
> +		ret = -EIO;
> +
> +release:
> +	cgbc_command_unlock(cgbc);
> +
> +out:
> +	mutex_unlock(&cgbc->lock);
> +
> +	if (status)
> +		*status = istatus;
> +
> +	return ret;
> +}
> +
> +int cgbc_command(struct cgbc_device_data *cgbc, void *cmd, unsigned int cmd_size,
> +		 void *data, unsigned int data_size, u8 *status)

What's the point of this abstracted function?

> +{
> +	return __cgbc_command(cgbc, (u8 *)cmd, cmd_size, (u8 *)data, data_size, status);
> +}
> +EXPORT_SYMBOL_GPL(cgbc_command);
> +
> +static struct mfd_cell cgbc_devs[] = {
> +	{ .name = "cgbc-wdt"	},
> +	{ .name = "cgbc-gpio"	},
> +	{ .name = "cgbc-i2c", .id = 1 },
> +	{ .name = "cgbc-i2c", .id = 2 },
> +};
> +
> +static int cgbc_map(struct cgbc_device_data *cgbc)
> +{
> +	struct device *dev = cgbc->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct resource *ioport;
> +
> +	ioport = platform_get_resource(pdev, IORESOURCE_IO, 0);
> +	if (!ioport)
> +		return -EINVAL;
> +
> +	cgbc->io_session = devm_ioport_map(dev, ioport->start,
> +					   resource_size(ioport));
> +	if (!cgbc->io_session)
> +		return -ENOMEM;
> +
> +	ioport = platform_get_resource(pdev, IORESOURCE_IO, 1);
> +	if (!ioport)
> +		return -EINVAL;
> +
> +	cgbc->io_cmd = devm_ioport_map(dev, ioport->start,
> +				       resource_size(ioport));
> +	if (!cgbc->io_cmd)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +
> +static struct resource cgbc_ioresource[] = {
> +	{
> +		.start  = CGBC_IO_SESSION_BASE,
> +		.end    = CGBC_IO_SESSION_END,
> +		.flags  = IORESOURCE_IO,
> +	},
> +	{
> +		.start  = CGBC_IO_CMD_BASE,
> +		.end    = CGBC_IO_CMD_END,
> +		.flags  = IORESOURCE_IO,
> +	},
> +};
> +
> +static const struct cgbc_platform_data cgbc_platform_data = {
> +	.ioresource = &cgbc_ioresource[0],
> +	.num_ioresource = ARRAY_SIZE(cgbc_ioresource),
> +};
> +
> +static int cgbc_create_platform_device(const struct cgbc_platform_data *pdata)
> +{
> +	const struct platform_device_info pdevinfo = {
> +		.name = "cgbc",
> +		.id = PLATFORM_DEVID_NONE,
> +		.res = pdata->ioresource,
> +		.num_res = pdata->num_ioresource,
> +	};
> +
> +	cgbc_pdev = platform_device_register_full(&pdevinfo);
> +	if (IS_ERR(cgbc_pdev))
> +		return PTR_ERR(cgbc_pdev);
> +
> +	return 0;
> +}
> +
> +static ssize_t cgbc_version_show(struct device *dev,
> +				 struct device_attribute *attr, char *buf)
> +{
> +	struct cgbc_device_data *cgbc = dev_get_drvdata(dev);
> +
> +	return sysfs_emit(buf, "CGBCP%c%c%c\n", cgbc->version.feature,
> +			  cgbc->version.major, cgbc->version.minor);
> +}
> +
> +static DEVICE_ATTR_RO(cgbc_version);
> +
> +static struct attribute *cgbc_attrs[] = {
> +	&dev_attr_cgbc_version.attr,
> +	NULL
> +};
> +
> +ATTRIBUTE_GROUPS(cgbc);
> +
> +static int cgbc_get_version(struct cgbc_device_data *cgbc)
> +{
> +	u8 cmd = CGBC_CMD_GET_FW_REV;
> +	u8 data[4];
> +	int ret;
> +
> +	ret = cgbc_command(cgbc, &cmd, 1, &data, sizeof(data), NULL);
> +	if (ret)
> +		return ret;
> +
> +	cgbc->version.feature = data[0];
> +	cgbc->version.major = data[1];
> +	cgbc->version.minor = data[2];
> +
> +	return 0;
> +}
> +
> +static int cgbc_init_device(struct cgbc_device_data *cgbc)
> +{
> +	int ret;
> +
> +	ret = cgbc_session_request(cgbc);
> +	if (ret)
> +		return ret;
> +
> +	ret = cgbc_get_version(cgbc);
> +	if (ret)
> +		return ret;
> +
> +	return mfd_add_devices(cgbc->dev, -1, cgbc_devs,
> +			       ARRAY_SIZE(cgbc_devs), NULL, 0, NULL);
> +}
> +
> +static int cgbc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct cgbc_device_data *cgbc;
> +	int ret;
> +
> +	cgbc = devm_kzalloc(dev, sizeof(*cgbc), GFP_KERNEL);
> +	if (!cgbc)
> +		return -ENOMEM;
> +
> +	cgbc->dev = dev;
> +
> +	ret = cgbc_map(cgbc);
> +	if (ret)
> +		return ret;
> +
> +	mutex_init(&cgbc->lock);
> +
> +	platform_set_drvdata(pdev, cgbc);
> +
> +	return cgbc_init_device(cgbc);
> +}
> +
> +static void cgbc_remove(struct platform_device *pdev)
> +{
> +	struct cgbc_device_data *cgbc = platform_get_drvdata(pdev);
> +
> +	cgbc_session_release(cgbc);
> +
> +	mfd_remove_devices(&pdev->dev);
> +}
> +
> +static struct platform_driver cgbc_driver = {
> +	.driver		= {
> +		.name		= "cgbc",
> +		.dev_groups	= cgbc_groups,
> +	},
> +	.probe		= cgbc_probe,
> +	.remove_new	= cgbc_remove,
> +};
> +
> +static const struct dmi_system_id cgbc_dmi_table[] __initconst = {
> +	{
> +		.ident = "SA7",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "congatec"),
> +			DMI_MATCH(DMI_BOARD_NAME, "conga-SA7"),
> +		},
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(dmi, cgbc_dmi_table);
> +
> +static int __init cgbc_init(void)
> +{
> +	const struct dmi_system_id *id;
> +	int ret = -ENODEV;
> +
> +	id = dmi_first_match(cgbc_dmi_table);
> +	if (IS_ERR_OR_NULL(id))
> +		return ret;
> +
> +	ret = cgbc_create_platform_device(&cgbc_platform_data);

You have no other way to register this device?  ACPI/PCI/I2C?

> +	if (ret)
> +		return ret;
> +
> +	return platform_driver_register(&cgbc_driver);
> +}
> +
> +static void __exit cgbc_exit(void)
> +{
> +	platform_device_unregister(cgbc_pdev);
> +	platform_driver_unregister(&cgbc_driver);
> +}
> +
> +module_init(cgbc_init);
> +module_exit(cgbc_exit);
> +
> +MODULE_DESCRIPTION("Congatec Board Controller Core Driver");
> +MODULE_AUTHOR("Thomas Richard <thomas.richard@bootlin.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:cgbc-core");
> diff --git a/include/linux/mfd/cgbc.h b/include/linux/mfd/cgbc.h
> new file mode 100644
> index 000000000000..badbec4c7033
> --- /dev/null
> +++ b/include/linux/mfd/cgbc.h
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Congatec Board Controller driver definitions
> + *
> + * Copyright (C) 2024 Bootlin
> + * Author: Thomas Richard <thomas.richard@bootlin.com>
> + */
> +
> +#ifndef _LINUX_MFD_CGBC_H_
> +
> +/**
> + * struct cgbc_version - Board Controller device version structure
> + * @feature:	Board Controller feature number
> + * @major:	Board Controller major revision
> + * @minor:	Board Controller minor revision
> + */
> +struct cgbc_version {
> +	unsigned char feature;
> +	unsigned char major;
> +	unsigned char minor;
> +};
> +
> +/**
> + * struct cgbc_device_data - Internal representation of the Board Controller device
> + * @io_session:		Pointer to the session IO memory
> + * @io_cmd:		Pointer to the command IO memory
> + * @session:		Session id returned by the Board Controller
> + * @dev:		Pointer to kernel device structure
> + * @cgbc_version:	Board Controller version structure
> + * @mutex:		Board Controller mutex
> + */
> +struct cgbc_device_data {
> +	void __iomem		*io_session;
> +	void __iomem		*io_cmd;
> +	u8			session;
> +	struct device		*dev;
> +	struct cgbc_version	version;
> +	struct mutex		lock;
> +};
> +
> +int cgbc_command(struct cgbc_device_data *cgbc, void *cmd, unsigned int cmd_size,
> +		 void *data, unsigned int data_size, u8 *status);
> +
> +#endif /*_LINUX_MFD_CGBC_H_*/

There's more to review, but I think there is enough to turn around for now.
Thomas Richard Sept. 10, 2024, 3:41 p.m. UTC | #2
On 8/22/24 12:38, Lee Jones wrote:
> On Fri, 09 Aug 2024, Thomas Richard wrote:
> 
>> Add core MFD driver for the Board Controller found on some Congatec SMARC
>> module. This Board Controller provides functions like watchdog, GPIO, and
>> I2C busses.
>>
>> This commit add support only for the conga-SA7 module.
>>
>> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
>> ---
>>  drivers/mfd/Kconfig      |  12 ++
>>  drivers/mfd/Makefile     |   1 +
>>  drivers/mfd/cgbc-core.c  | 453 +++++++++++++++++++++++++++++++++++++++++++++++
>>  include/linux/mfd/cgbc.h |  44 +++++
>>  4 files changed, 510 insertions(+)
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index bc8be2e593b6..3e0530f30267 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -224,6 +224,18 @@ config MFD_AXP20X_RSB
>>  	  components like regulators or the PEK (Power Enable Key) under the
>>  	  corresponding menus.
>>  
>> +config MFD_CGBC
>> +	tristate "Congatec Board Controller"
>> +	select MFD_CORE
>> +	depends on X86
>> +	help
>> +	  This is the core driver of the Board Controller found on some Congatec
>> +	  SMARC modules. The Board Controller provides functions like watchdog,
>> +	  I2C busses, and GPIO controller.
>> +
>> +	  To compile this driver as a module, choose M here: the module will be
>> +	  called cgbc-core.
>> +
>>  config MFD_CROS_EC_DEV
>>  	tristate "ChromeOS Embedded Controller multifunction device"
>>  	select MFD_CORE
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 02b651cd7535..d5da3fcd691c 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
>>  obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
>>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
>>  obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
>> +obj-$(CONFIG_MFD_CGBC)		+= cgbc-core.o
>>  obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
>>  obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
>>  obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
>> diff --git a/drivers/mfd/cgbc-core.c b/drivers/mfd/cgbc-core.c
>> new file mode 100644
>> index 000000000000..cca9b1170cc9
>> --- /dev/null
>> +++ b/drivers/mfd/cgbc-core.c
>> @@ -0,0 +1,453 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Congatec Board Controller MFD core driver.
> 
> No such thing as an MFD.

What should it be if it's not an MFD ?

> 
>> + * The x86 Congatec modules have an embedded micro controller named Board
>> + * Controller.
> 
> I think the '\n' can be dropped without issue.

Will be fixed in v2

> 
>> + * This Board Controller have a watchdog timer, some GPIOs, and two i2c busses.
> 
> "has a"
> 
> Consider "Watchdog"
> 
> "I2C"

Will be fixed in v2

> 
>> + *
>> + * Copyright (C) 2024 Bootlin
> 
> Nit: '\n' here.

Will be fixed in v2

> 
>> + * Author: Thomas Richard <thomas.richard@bootlin.com>
>> + */
>> +
>> +#include <linux/dmi.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/cgbc.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/sysfs.h>
> 
> Alphabetical.

Will be fixed in v2

> 
>> +#define CGBC_MASK_STATUS        (BIT(6) | BIT(7))
>> +#define CGBC_MASK_DATA_COUNT	0x1F
>> +#define CGBC_MASK_ERROR_CODE	0x1F
> 
> Not sure if it's just my mailer, but if all of these are not already
> aligned, please can you tab them out so that they are.

It was not your mailer :)
Will be fixed in v2

> 
>> +#define CGBC_STATUS_DATA_READY	0x00
>> +#define CGBC_STATUS_CMD_READY	BIT(6)
>> +#define CGBC_STATUS_ERROR	(BIT(6) | BIT(7))
>> +
>> +#define CGBC_CMD_GET_FW_REV	0x21
>> +
>> +#define CGBC_IO_SESSION_BASE	0x0E20
>> +#define CGBC_IO_SESSION_END	0x0E30
>> +#define CGBC_IO_CMD_BASE	0x0E00
>> +#define CGBC_IO_CMD_END		0x0E10
>> +
>> +#define CGBC_SESSION_CMD	0x00
>> +#define		CGBC_SESSION_CMD_IDLE		0x00
>> +#define		CGBC_SESSION_CMD_REQUEST	0x01
>> +#define	CGBC_SESSION_DATA	0x01
>> +#define CGBC_SESSION_STATUS	0x02
>> +#define		CGBC_SESSION_STATUS_FREE	0x03
>> +#define CGBC_SESSION_ACCESS	0x04
>> +#define		CGBC_SESSION_ACCESS_GAINED	0x00
>> +
>> +#define CGBC_SESSION_VALID_MIN  0x02
>> +#define CGBC_SESSION_VALID_MAX  0xFE
>> +
>> +#define CGBC_CMD_STROBE	0x00
>> +#define CGBC_CMD_INDEX	0x02
>> +#define		CGBC_CMD_INDEX_CBM_MAN8		0x00
>> +#define		CGBC_CMD_INDEX_CBM_AUTO32	0x03
>> +#define CGBC_CMD_DATA	0x04
>> +#define CGBC_CMD_ACCESS	0x0C
>> +
>> +struct cgbc_platform_data {
>> +	const struct resource	*ioresource;
>> +	unsigned int		num_ioresource;
>> +};
> 
> This looks way over engineered.
> 
> Why not provide platform_device_info statically in the first place?

Yes indeed, if I use platform_device_register_simple(), I can remove the
struct cgbc_platform_data, and cgbc_create_platform_device().
It makes the code smaller.

> 
>> +static struct platform_device *cgbc_pdev;
> 
> No avoidable globals.

I don't see how can I have cgbc_pdev not global.

> 
> This stuff should get stored in driver data (ddata)
> 
>> +static int cgbc_detect_device(struct cgbc_device_data *cgbc)
>> +{
>> +	u16 status;
>> +	int ret;
>> +
>> +	ret = readx_poll_timeout(ioread16, cgbc->io_session + CGBC_SESSION_STATUS, status,
>> +				 status == CGBC_SESSION_STATUS_FREE, 0, 500000);
>> +
>> +	if (ret || ioread32(cgbc->io_session + CGBC_SESSION_ACCESS))
>> +		ret = -ENODEV;
>> +
>> +	return ret;
>> +}
> 
> This function could do with some commentary.

Comment added in v2

> 
>> +static int cgbc_session_command(struct cgbc_device_data *cgbc, u8 cmd)
>> +{
>> +	int ret;
>> +	u8 val;
>> +
>> +	ret = readx_poll_timeout(ioread8, cgbc->io_session + CGBC_SESSION_CMD, val,
>> +				 val == CGBC_SESSION_CMD_IDLE, 0, 100000);
>> +	if (ret)
>> +		return ret;
>> +
>> +	iowrite8(cmd, cgbc->io_session + CGBC_SESSION_CMD);
>> +
>> +	ret = readx_poll_timeout(ioread8, cgbc->io_session + CGBC_SESSION_CMD, val,
>> +				 val == CGBC_SESSION_CMD_IDLE, 0, 100000);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = (int)ioread8(cgbc->io_session + CGBC_SESSION_DATA);
>> +
>> +	iowrite8(CGBC_SESSION_STATUS_FREE,
>> +		 cgbc->io_session + CGBC_SESSION_STATUS);
> 
> Which char are you using to line-feed?  This looks inconsistent.
> 
>> +
>> +	return ret;
>> +}
>> +
>> +static int cgbc_session_request(struct cgbc_device_data *cgbc)
>> +{
>> +	unsigned int ret = cgbc_detect_device(cgbc);
> 
> What does cgbc_detect_device() do?
> 
> You're not getting the device?  Just seeing if it's present?

cgbc_detect_device() waits the device ready to create (or close) a session.
I will rename it to cgbc_wait_device().
Indirectly it checks if the device is present as it waits some specific
values.

> 
> Please separate the declaration from the assignment when calling
> functions.
> 

Will be fixed in v2

>> +	if (ret)
>> +		return dev_err_probe(cgbc->dev, ret, "device not found\n");
>> +
>> +	cgbc->session = cgbc_session_command(cgbc, CGBC_SESSION_CMD_REQUEST);
>> +
>> +	/* the Board Controller sent us a wrong session handle, we cannot
> 
> This is a non-standard multi-line comment.

Will be fixed in v2

> 
>> +	 * communicate with it.
>> +	 */
>> +	if (cgbc->session < CGBC_SESSION_VALID_MIN ||
>> +	    cgbc->session > CGBC_SESSION_VALID_MAX) {
> 
> How are you justifying this line-break and then not line-breaking 2
> lines down?

Will be fixed in v2

> 
>> +		cgbc->session = 0;
> 
> Why are we setting variables before bombing out?
> 
>> +		return dev_err_probe(cgbc->dev, (cgbc->session < 0) ? cgbc->session : -ECONNREFUSED,
> 
> How can (cgbc->session < 0) ever be true?

It cannot.
It's a total nonsense, I'll fix it in v2.

> 
>> +				     "failed to get a valid session handle\n");
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void cgbc_session_release(struct cgbc_device_data *cgbc)
>> +{
>> +	if (cgbc_session_command(cgbc, cgbc->session) != cgbc->session)
> 
> What does this do?
> 
> Are we checking or doing something?  If the latter, then we shouldn't be
> doing that in an if() statement.  If the former, then what's the point
> of the function?

We try to close the session we opened with the device.
We check that the session is closed correctly.

> 
>> +		dev_err(cgbc->dev, "failed to release session\n");
> 
> Why print if there isn't anything you can do about it?

There is a limited number of session ids.
Not releasing correctly the session could be a problem in case of lots
of module load/unload.
But as 252 sessions can be opened, the maximum number of session will
probably never be reached.
But it could be interesting to have the information that something is
wrong and we failed to close the session.
A dev_info() or dev_warn() is maybe more relevant.

> 
>> +}
>> +
>> +static bool cgbc_command_lock(struct cgbc_device_data *cgbc)
>> +{
>> +	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_ACCESS);
>> +
>> +	return ioread8(cgbc->io_cmd + CGBC_CMD_ACCESS) == cgbc->session;
>> +}
>> +
>> +static void cgbc_command_unlock(struct cgbc_device_data *cgbc)
>> +{
>> +	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_ACCESS);
>> +}
>> +
>> +static int __cgbc_command(struct cgbc_device_data *cgbc, u8 *cmd, u8 cmd_size,
>> +			  u8 *data, u8 data_size, u8 *status)
>> +{
>> +	u8 checksum = 0, data_checksum = 0, istatus = 0, val;
>> +	int mode_change = -1;
>> +	bool lock;
>> +	int ret, i;
>> +
>> +	mutex_lock(&cgbc->lock);
>> +
>> +	/* request access */
> 
> Start comments with uppercase chars please.

Will be fixed in v2

> 
>> +	ret = readx_poll_timeout(cgbc_command_lock, cgbc, lock, lock, 0, 100000);
>> +	if (ret)
>> +		goto out;
>> +
>> +	/* wait board controller is ready */
>> +	ret = readx_poll_timeout(ioread8, cgbc->io_cmd + CGBC_CMD_STROBE, val,
>> +				 val == CGBC_CMD_STROBE, 0, 100000);
>> +	if (ret)
>> +		goto release;
>> +
>> +	/* write command packet */
>> +	if (cmd_size <= 2) {
>> +		iowrite8(CGBC_CMD_INDEX_CBM_MAN8,
>> +			 cgbc->io_cmd + CGBC_CMD_INDEX);
>> +	} else {
>> +		iowrite8(CGBC_CMD_INDEX_CBM_AUTO32,
>> +			 cgbc->io_cmd + CGBC_CMD_INDEX);
>> +		if ((cmd_size % 4) != 0x03)
>> +			mode_change = (cmd_size & 0xFFFC) - 1;
>> +	}
>> +
>> +	for (i = 0; i < cmd_size; i++) {
>> +		iowrite8(cmd[i], cgbc->io_cmd + CGBC_CMD_DATA + (i % 4));
>> +		checksum ^= cmd[i];
>> +		if (mode_change == i)
>> +			iowrite8((i + 1) | CGBC_CMD_INDEX_CBM_MAN8,
>> +				 cgbc->io_cmd + CGBC_CMD_INDEX);
>> +	}
>> +
>> +	/* append checksum byte */
>> +	iowrite8(checksum, cgbc->io_cmd + CGBC_CMD_DATA + (i % 4));
>> +
>> +	/* perform command strobe */
>> +	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_STROBE);
>> +
>> +	/* rewind cmd buffer index */
>> +	iowrite8(CGBC_CMD_INDEX_CBM_AUTO32,
>> +		 cgbc->io_cmd + CGBC_CMD_INDEX);
>> +
>> +	/* wait command completion */
>> +	ret = read_poll_timeout(ioread8, val, val == CGBC_CMD_STROBE, 0,
>> +				100000, false,
>> +				cgbc->io_cmd + CGBC_CMD_STROBE);
>> +	if (ret)
>> +		goto release;
>> +
>> +	istatus = ioread8(cgbc->io_cmd + CGBC_CMD_DATA);
>> +	checksum = istatus;
>> +
>> +	/* check command status */
>> +	switch (istatus & CGBC_MASK_STATUS) {
>> +	case CGBC_STATUS_DATA_READY:
>> +		if (istatus > data_size)
>> +			istatus = data_size;
>> +		for (i = 0; i < istatus; i++) {
>> +			data[i] = ioread8(cgbc->io_cmd +
>> +					  CGBC_CMD_DATA + ((i + 1) % 4));
>> +			checksum ^= data[i];
>> +		}
>> +		data_checksum = ioread8(cgbc->io_cmd +
>> +					CGBC_CMD_DATA + ((i + 1) % 4));
>> +		istatus &= CGBC_MASK_DATA_COUNT;
>> +		break;
>> +	case CGBC_STATUS_ERROR:
>> +	case CGBC_STATUS_CMD_READY:
>> +		data_checksum = ioread8(cgbc->io_cmd +
>> +					CGBC_CMD_DATA + 1);
>> +		if ((istatus & CGBC_MASK_STATUS) == CGBC_STATUS_ERROR)
>> +			ret = -EIO;
>> +		istatus = istatus & CGBC_MASK_ERROR_CODE;
>> +		break;
>> +	default:
>> +		data_checksum = ioread8(cgbc->io_cmd + CGBC_CMD_DATA + 1);
>> +		istatus &= CGBC_MASK_ERROR_CODE;
>> +		ret = -EIO;
>> +		break;
>> +	}
>> +
>> +	/* checksum verification */
>> +	if (ret == 0 && data_checksum != checksum)
>> +		ret = -EIO;
>> +
>> +release:
>> +	cgbc_command_unlock(cgbc);
>> +
>> +out:
>> +	mutex_unlock(&cgbc->lock);
>> +
>> +	if (status)
>> +		*status = istatus;
>> +
>> +	return ret;
>> +}
>> +
>> +int cgbc_command(struct cgbc_device_data *cgbc, void *cmd, unsigned int cmd_size,
>> +		 void *data, unsigned int data_size, u8 *status)
> 
> What's the point of this abstracted function?

The goal was to cast cmd and data.
But it can be done directly in the function. So this wrapper is useless.

> 
>> +{
>> +	return __cgbc_command(cgbc, (u8 *)cmd, cmd_size, (u8 *)data, data_size, status);
>> +}
>> +EXPORT_SYMBOL_GPL(cgbc_command);
>> +
>> +static struct mfd_cell cgbc_devs[] = {
>> +	{ .name = "cgbc-wdt"	},
>> +	{ .name = "cgbc-gpio"	},
>> +	{ .name = "cgbc-i2c", .id = 1 },
>> +	{ .name = "cgbc-i2c", .id = 2 },
>> +};
>> +
>> +static int cgbc_map(struct cgbc_device_data *cgbc)
>> +{
>> +	struct device *dev = cgbc->dev;
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +	struct resource *ioport;
>> +
>> +	ioport = platform_get_resource(pdev, IORESOURCE_IO, 0);
>> +	if (!ioport)
>> +		return -EINVAL;
>> +
>> +	cgbc->io_session = devm_ioport_map(dev, ioport->start,
>> +					   resource_size(ioport));
>> +	if (!cgbc->io_session)
>> +		return -ENOMEM;
>> +
>> +	ioport = platform_get_resource(pdev, IORESOURCE_IO, 1);
>> +	if (!ioport)
>> +		return -EINVAL;
>> +
>> +	cgbc->io_cmd = devm_ioport_map(dev, ioport->start,
>> +				       resource_size(ioport));
>> +	if (!cgbc->io_cmd)
>> +		return -ENOMEM;
>> +
>> +	return 0;
>> +}
>> +
>> +static struct resource cgbc_ioresource[] = {
>> +	{
>> +		.start  = CGBC_IO_SESSION_BASE,
>> +		.end    = CGBC_IO_SESSION_END,
>> +		.flags  = IORESOURCE_IO,
>> +	},
>> +	{
>> +		.start  = CGBC_IO_CMD_BASE,
>> +		.end    = CGBC_IO_CMD_END,
>> +		.flags  = IORESOURCE_IO,
>> +	},
>> +};
>> +
>> +static const struct cgbc_platform_data cgbc_platform_data = {
>> +	.ioresource = &cgbc_ioresource[0],
>> +	.num_ioresource = ARRAY_SIZE(cgbc_ioresource),
>> +};
>> +
>> +static int cgbc_create_platform_device(const struct cgbc_platform_data *pdata)
>> +{
>> +	const struct platform_device_info pdevinfo = {
>> +		.name = "cgbc",
>> +		.id = PLATFORM_DEVID_NONE,
>> +		.res = pdata->ioresource,
>> +		.num_res = pdata->num_ioresource,
>> +	};
>> +
>> +	cgbc_pdev = platform_device_register_full(&pdevinfo);
>> +	if (IS_ERR(cgbc_pdev))
>> +		return PTR_ERR(cgbc_pdev);
>> +
>> +	return 0;
>> +}
>> +
>> +static ssize_t cgbc_version_show(struct device *dev,
>> +				 struct device_attribute *attr, char *buf)
>> +{
>> +	struct cgbc_device_data *cgbc = dev_get_drvdata(dev);
>> +
>> +	return sysfs_emit(buf, "CGBCP%c%c%c\n", cgbc->version.feature,
>> +			  cgbc->version.major, cgbc->version.minor);
>> +}
>> +
>> +static DEVICE_ATTR_RO(cgbc_version);
>> +
>> +static struct attribute *cgbc_attrs[] = {
>> +	&dev_attr_cgbc_version.attr,
>> +	NULL
>> +};
>> +
>> +ATTRIBUTE_GROUPS(cgbc);
>> +
>> +static int cgbc_get_version(struct cgbc_device_data *cgbc)
>> +{
>> +	u8 cmd = CGBC_CMD_GET_FW_REV;
>> +	u8 data[4];
>> +	int ret;
>> +
>> +	ret = cgbc_command(cgbc, &cmd, 1, &data, sizeof(data), NULL);
>> +	if (ret)
>> +		return ret;
>> +
>> +	cgbc->version.feature = data[0];
>> +	cgbc->version.major = data[1];
>> +	cgbc->version.minor = data[2];
>> +
>> +	return 0;
>> +}
>> +
>> +static int cgbc_init_device(struct cgbc_device_data *cgbc)
>> +{
>> +	int ret;
>> +
>> +	ret = cgbc_session_request(cgbc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = cgbc_get_version(cgbc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return mfd_add_devices(cgbc->dev, -1, cgbc_devs,
>> +			       ARRAY_SIZE(cgbc_devs), NULL, 0, NULL);
>> +}
>> +
>> +static int cgbc_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct cgbc_device_data *cgbc;
>> +	int ret;
>> +
>> +	cgbc = devm_kzalloc(dev, sizeof(*cgbc), GFP_KERNEL);
>> +	if (!cgbc)
>> +		return -ENOMEM;
>> +
>> +	cgbc->dev = dev;
>> +
>> +	ret = cgbc_map(cgbc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	mutex_init(&cgbc->lock);
>> +
>> +	platform_set_drvdata(pdev, cgbc);
>> +
>> +	return cgbc_init_device(cgbc);
>> +}
>> +
>> +static void cgbc_remove(struct platform_device *pdev)
>> +{
>> +	struct cgbc_device_data *cgbc = platform_get_drvdata(pdev);
>> +
>> +	cgbc_session_release(cgbc);
>> +
>> +	mfd_remove_devices(&pdev->dev);
>> +}
>> +
>> +static struct platform_driver cgbc_driver = {
>> +	.driver		= {
>> +		.name		= "cgbc",
>> +		.dev_groups	= cgbc_groups,
>> +	},
>> +	.probe		= cgbc_probe,
>> +	.remove_new	= cgbc_remove,
>> +};
>> +
>> +static const struct dmi_system_id cgbc_dmi_table[] __initconst = {
>> +	{
>> +		.ident = "SA7",
>> +		.matches = {
>> +			DMI_MATCH(DMI_BOARD_VENDOR, "congatec"),
>> +			DMI_MATCH(DMI_BOARD_NAME, "conga-SA7"),
>> +		},
>> +	},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(dmi, cgbc_dmi_table);
>> +
>> +static int __init cgbc_init(void)
>> +{
>> +	const struct dmi_system_id *id;
>> +	int ret = -ENODEV;
>> +
>> +	id = dmi_first_match(cgbc_dmi_table);
>> +	if (IS_ERR_OR_NULL(id))
>> +		return ret;
>> +
>> +	ret = cgbc_create_platform_device(&cgbc_platform_data);
> 
> You have no other way to register this device?  ACPI/PCI/I2C?

No, the Board Controller is on a eSPI bus.
I found nothing in ACPI tables related to this Board Controller.
The only way is to use DMI tables and match board name.

> 
>> +	if (ret)
>> +		return ret;
>> +
>> +	return platform_driver_register(&cgbc_driver);
>> +}
>> +
>> +static void __exit cgbc_exit(void)
>> +{
>> +	platform_device_unregister(cgbc_pdev);
>> +	platform_driver_unregister(&cgbc_driver);
>> +}
>> +
>> +module_init(cgbc_init);
>> +module_exit(cgbc_exit);
>> +
>> +MODULE_DESCRIPTION("Congatec Board Controller Core Driver");
>> +MODULE_AUTHOR("Thomas Richard <thomas.richard@bootlin.com>");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:cgbc-core");
>> diff --git a/include/linux/mfd/cgbc.h b/include/linux/mfd/cgbc.h
>> new file mode 100644
>> index 000000000000..badbec4c7033
>> --- /dev/null
>> +++ b/include/linux/mfd/cgbc.h
>> @@ -0,0 +1,44 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * Congatec Board Controller driver definitions
>> + *
>> + * Copyright (C) 2024 Bootlin
>> + * Author: Thomas Richard <thomas.richard@bootlin.com>
>> + */
>> +
>> +#ifndef _LINUX_MFD_CGBC_H_
>> +
>> +/**
>> + * struct cgbc_version - Board Controller device version structure
>> + * @feature:	Board Controller feature number
>> + * @major:	Board Controller major revision
>> + * @minor:	Board Controller minor revision
>> + */
>> +struct cgbc_version {
>> +	unsigned char feature;
>> +	unsigned char major;
>> +	unsigned char minor;
>> +};
>> +
>> +/**
>> + * struct cgbc_device_data - Internal representation of the Board Controller device
>> + * @io_session:		Pointer to the session IO memory
>> + * @io_cmd:		Pointer to the command IO memory
>> + * @session:		Session id returned by the Board Controller
>> + * @dev:		Pointer to kernel device structure
>> + * @cgbc_version:	Board Controller version structure
>> + * @mutex:		Board Controller mutex
>> + */
>> +struct cgbc_device_data {
>> +	void __iomem		*io_session;
>> +	void __iomem		*io_cmd;
>> +	u8			session;
>> +	struct device		*dev;
>> +	struct cgbc_version	version;
>> +	struct mutex		lock;
>> +};
>> +
>> +int cgbc_command(struct cgbc_device_data *cgbc, void *cmd, unsigned int cmd_size,
>> +		 void *data, unsigned int data_size, u8 *status);
>> +
>> +#endif /*_LINUX_MFD_CGBC_H_*/
> 
> There's more to review, but I think there is enough to turn around for now.

Thanks for the review !!
Lee Jones Sept. 12, 2024, 2:13 p.m. UTC | #3
On Tue, 10 Sep 2024, Thomas Richard wrote:

> On 8/22/24 12:38, Lee Jones wrote:
> > On Fri, 09 Aug 2024, Thomas Richard wrote:
> > 
> >> Add core MFD driver for the Board Controller found on some Congatec SMARC
> >> module. This Board Controller provides functions like watchdog, GPIO, and
> >> I2C busses.
> >>
> >> This commit add support only for the conga-SA7 module.
> >>
> >> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
> >> ---
> >>  drivers/mfd/Kconfig      |  12 ++
> >>  drivers/mfd/Makefile     |   1 +
> >>  drivers/mfd/cgbc-core.c  | 453 +++++++++++++++++++++++++++++++++++++++++++++++
> >>  include/linux/mfd/cgbc.h |  44 +++++
> >>  4 files changed, 510 insertions(+)
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index bc8be2e593b6..3e0530f30267 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -224,6 +224,18 @@ config MFD_AXP20X_RSB
> >>  	  components like regulators or the PEK (Power Enable Key) under the
> >>  	  corresponding menus.
> >>  
> >> +config MFD_CGBC
> >> +	tristate "Congatec Board Controller"
> >> +	select MFD_CORE
> >> +	depends on X86
> >> +	help
> >> +	  This is the core driver of the Board Controller found on some Congatec
> >> +	  SMARC modules. The Board Controller provides functions like watchdog,
> >> +	  I2C busses, and GPIO controller.
> >> +
> >> +	  To compile this driver as a module, choose M here: the module will be
> >> +	  called cgbc-core.
> >> +
> >>  config MFD_CROS_EC_DEV
> >>  	tristate "ChromeOS Embedded Controller multifunction device"
> >>  	select MFD_CORE
> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >> index 02b651cd7535..d5da3fcd691c 100644
> >> --- a/drivers/mfd/Makefile
> >> +++ b/drivers/mfd/Makefile
> >> @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
> >>  obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
> >>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> >>  obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
> >> +obj-$(CONFIG_MFD_CGBC)		+= cgbc-core.o
> >>  obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
> >>  obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
> >>  obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
> >> diff --git a/drivers/mfd/cgbc-core.c b/drivers/mfd/cgbc-core.c
> >> new file mode 100644
> >> index 000000000000..cca9b1170cc9
> >> --- /dev/null
> >> +++ b/drivers/mfd/cgbc-core.c
> >> @@ -0,0 +1,453 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + * Congatec Board Controller MFD core driver.
> > 
> > No such thing as an MFD.
> 
> What should it be if it's not an MFD ?

You should be telling me this. :)

"Board Controller" according to the Kconfig entry.

> >> +static struct platform_device *cgbc_pdev;
> > 
> > No avoidable globals.
> 
> I don't see how can I have cgbc_pdev not global.

Because of the incestuous, "I am my own parent", thing?  Okay.

> >> +static void cgbc_session_release(struct cgbc_device_data *cgbc)
> >> +{
> >> +	if (cgbc_session_command(cgbc, cgbc->session) != cgbc->session)
> > 
> > What does this do?
> > 
> > Are we checking or doing something?  If the latter, then we shouldn't be
> > doing that in an if() statement.  If the former, then what's the point
> > of the function?
> 
> We try to close the session we opened with the device.
> We check that the session is closed correctly.

Please remove it from the if statement and store the result in variable
with suitable nomenclature please.

[...]

In future, please snip everything you do not wish to discuss.

> Thanks for the review !!

No problem.
Thomas Richard Sept. 13, 2024, 8:30 a.m. UTC | #4
On 9/12/24 16:13, Lee Jones wrote:
> On Tue, 10 Sep 2024, Thomas Richard wrote:
> 
>> On 8/22/24 12:38, Lee Jones wrote:
>>> On Fri, 09 Aug 2024, Thomas Richard wrote:
>>>
>>>> Add core MFD driver for the Board Controller found on some Congatec SMARC
>>>> module. This Board Controller provides functions like watchdog, GPIO, and
>>>> I2C busses.
>>>>
>>>> This commit add support only for the conga-SA7 module.
>>>>
>>>> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
>>>> ---
>>>>  drivers/mfd/Kconfig      |  12 ++
>>>>  drivers/mfd/Makefile     |   1 +
>>>>  drivers/mfd/cgbc-core.c  | 453 +++++++++++++++++++++++++++++++++++++++++++++++
>>>>  include/linux/mfd/cgbc.h |  44 +++++
>>>>  4 files changed, 510 insertions(+)
>>>>
>>>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>>>> index bc8be2e593b6..3e0530f30267 100644
>>>> --- a/drivers/mfd/Kconfig
>>>> +++ b/drivers/mfd/Kconfig
>>>> @@ -224,6 +224,18 @@ config MFD_AXP20X_RSB
>>>>  	  components like regulators or the PEK (Power Enable Key) under the
>>>>  	  corresponding menus.
>>>>  
>>>> +config MFD_CGBC
>>>> +	tristate "Congatec Board Controller"
>>>> +	select MFD_CORE
>>>> +	depends on X86
>>>> +	help
>>>> +	  This is the core driver of the Board Controller found on some Congatec
>>>> +	  SMARC modules. The Board Controller provides functions like watchdog,
>>>> +	  I2C busses, and GPIO controller.
>>>> +
>>>> +	  To compile this driver as a module, choose M here: the module will be
>>>> +	  called cgbc-core.
>>>> +
>>>>  config MFD_CROS_EC_DEV
>>>>  	tristate "ChromeOS Embedded Controller multifunction device"
>>>>  	select MFD_CORE
>>>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>>>> index 02b651cd7535..d5da3fcd691c 100644
>>>> --- a/drivers/mfd/Makefile
>>>> +++ b/drivers/mfd/Makefile
>>>> @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
>>>>  obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
>>>>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
>>>>  obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
>>>> +obj-$(CONFIG_MFD_CGBC)		+= cgbc-core.o
>>>>  obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
>>>>  obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
>>>>  obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
>>>> diff --git a/drivers/mfd/cgbc-core.c b/drivers/mfd/cgbc-core.c
>>>> new file mode 100644
>>>> index 000000000000..cca9b1170cc9
>>>> --- /dev/null
>>>> +++ b/drivers/mfd/cgbc-core.c
>>>> @@ -0,0 +1,453 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +/*
>>>> + * Congatec Board Controller MFD core driver.
>>>
>>> No such thing as an MFD.
>>
>> What should it be if it's not an MFD ?
> 
> You should be telling me this. :)
> 
> "Board Controller" according to the Kconfig entry.
> 

This Congatec Board Controller is an external micro-controller that is
interfaced with the CPU through a eSPI bus.
This Board Controller provides multiple functions: an I2C controller, a
GPIO controller, a watchdog and other not yet implemented functions
(temp/voltage sensors, backlight).

Therefore, the MFD subsystem is a very good fit, as it allows to have a
core driver that implements the communication with the external
micro-controller, and then individual drivers for each of the functions
offered by this Board Controller.

Thomas
Lee Jones Sept. 17, 2024, 8:09 a.m. UTC | #5
On Fri, 13 Sep 2024, Thomas Richard wrote:

> On 9/12/24 16:13, Lee Jones wrote:
> > On Tue, 10 Sep 2024, Thomas Richard wrote:
> > 
> >> On 8/22/24 12:38, Lee Jones wrote:
> >>> On Fri, 09 Aug 2024, Thomas Richard wrote:
> >>>
> >>>> Add core MFD driver for the Board Controller found on some Congatec SMARC
> >>>> module. This Board Controller provides functions like watchdog, GPIO, and
> >>>> I2C busses.
> >>>>
> >>>> This commit add support only for the conga-SA7 module.
> >>>>
> >>>> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
> >>>> ---
> >>>>  drivers/mfd/Kconfig      |  12 ++
> >>>>  drivers/mfd/Makefile     |   1 +
> >>>>  drivers/mfd/cgbc-core.c  | 453 +++++++++++++++++++++++++++++++++++++++++++++++
> >>>>  include/linux/mfd/cgbc.h |  44 +++++
> >>>>  4 files changed, 510 insertions(+)
> >>>>
> >>>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >>>> index bc8be2e593b6..3e0530f30267 100644
> >>>> --- a/drivers/mfd/Kconfig
> >>>> +++ b/drivers/mfd/Kconfig
> >>>> @@ -224,6 +224,18 @@ config MFD_AXP20X_RSB
> >>>>  	  components like regulators or the PEK (Power Enable Key) under the
> >>>>  	  corresponding menus.
> >>>>  
> >>>> +config MFD_CGBC
> >>>> +	tristate "Congatec Board Controller"
> >>>> +	select MFD_CORE
> >>>> +	depends on X86
> >>>> +	help
> >>>> +	  This is the core driver of the Board Controller found on some Congatec
> >>>> +	  SMARC modules. The Board Controller provides functions like watchdog,
> >>>> +	  I2C busses, and GPIO controller.
> >>>> +
> >>>> +	  To compile this driver as a module, choose M here: the module will be
> >>>> +	  called cgbc-core.
> >>>> +
> >>>>  config MFD_CROS_EC_DEV
> >>>>  	tristate "ChromeOS Embedded Controller multifunction device"
> >>>>  	select MFD_CORE
> >>>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >>>> index 02b651cd7535..d5da3fcd691c 100644
> >>>> --- a/drivers/mfd/Makefile
> >>>> +++ b/drivers/mfd/Makefile
> >>>> @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501)		+= sm501.o
> >>>>  obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
> >>>>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> >>>>  obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
> >>>> +obj-$(CONFIG_MFD_CGBC)		+= cgbc-core.o
> >>>>  obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
> >>>>  obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
> >>>>  obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
> >>>> diff --git a/drivers/mfd/cgbc-core.c b/drivers/mfd/cgbc-core.c
> >>>> new file mode 100644
> >>>> index 000000000000..cca9b1170cc9
> >>>> --- /dev/null
> >>>> +++ b/drivers/mfd/cgbc-core.c
> >>>> @@ -0,0 +1,453 @@
> >>>> +// SPDX-License-Identifier: GPL-2.0-or-later
> >>>> +/*
> >>>> + * Congatec Board Controller MFD core driver.
> >>>
> >>> No such thing as an MFD.
> >>
> >> What should it be if it's not an MFD ?
> > 
> > You should be telling me this. :)
> > 
> > "Board Controller" according to the Kconfig entry.
> > 
> 
> This Congatec Board Controller is an external micro-controller that is
> interfaced with the CPU through a eSPI bus.
> This Board Controller provides multiple functions: an I2C controller, a
> GPIO controller, a watchdog and other not yet implemented functions
> (temp/voltage sensors, backlight).
> 
> Therefore, the MFD subsystem is a very good fit, as it allows to have a
> core driver that implements the communication with the external
> micro-controller, and then individual drivers for each of the functions
> offered by this Board Controller.

Sorry for the ambiguity, that was not the point of the review comment.

Please remove all mentions to MFD in the help/header text.
diff mbox series

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bc8be2e593b6..3e0530f30267 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -224,6 +224,18 @@  config MFD_AXP20X_RSB
 	  components like regulators or the PEK (Power Enable Key) under the
 	  corresponding menus.
 
+config MFD_CGBC
+	tristate "Congatec Board Controller"
+	select MFD_CORE
+	depends on X86
+	help
+	  This is the core driver of the Board Controller found on some Congatec
+	  SMARC modules. The Board Controller provides functions like watchdog,
+	  I2C busses, and GPIO controller.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called cgbc-core.
+
 config MFD_CROS_EC_DEV
 	tristate "ChromeOS Embedded Controller multifunction device"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 02b651cd7535..d5da3fcd691c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -13,6 +13,7 @@  obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
+obj-$(CONFIG_MFD_CGBC)		+= cgbc-core.o
 obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
 obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
 obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
diff --git a/drivers/mfd/cgbc-core.c b/drivers/mfd/cgbc-core.c
new file mode 100644
index 000000000000..cca9b1170cc9
--- /dev/null
+++ b/drivers/mfd/cgbc-core.c
@@ -0,0 +1,453 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Congatec Board Controller MFD core driver.
+ *
+ * The x86 Congatec modules have an embedded micro controller named Board
+ * Controller.
+ * This Board Controller have a watchdog timer, some GPIOs, and two i2c busses.
+ *
+ * Copyright (C) 2024 Bootlin
+ * Author: Thomas Richard <thomas.richard@bootlin.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cgbc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/iopoll.h>
+#include <linux/sysfs.h>
+
+#define CGBC_MASK_STATUS        (BIT(6) | BIT(7))
+#define CGBC_MASK_DATA_COUNT	0x1F
+#define CGBC_MASK_ERROR_CODE	0x1F
+
+#define CGBC_STATUS_DATA_READY	0x00
+#define CGBC_STATUS_CMD_READY	BIT(6)
+#define CGBC_STATUS_ERROR	(BIT(6) | BIT(7))
+
+#define CGBC_CMD_GET_FW_REV	0x21
+
+#define CGBC_IO_SESSION_BASE	0x0E20
+#define CGBC_IO_SESSION_END	0x0E30
+#define CGBC_IO_CMD_BASE	0x0E00
+#define CGBC_IO_CMD_END		0x0E10
+
+#define CGBC_SESSION_CMD	0x00
+#define		CGBC_SESSION_CMD_IDLE		0x00
+#define		CGBC_SESSION_CMD_REQUEST	0x01
+#define	CGBC_SESSION_DATA	0x01
+#define CGBC_SESSION_STATUS	0x02
+#define		CGBC_SESSION_STATUS_FREE	0x03
+#define CGBC_SESSION_ACCESS	0x04
+#define		CGBC_SESSION_ACCESS_GAINED	0x00
+
+#define CGBC_SESSION_VALID_MIN  0x02
+#define CGBC_SESSION_VALID_MAX  0xFE
+
+#define CGBC_CMD_STROBE	0x00
+#define CGBC_CMD_INDEX	0x02
+#define		CGBC_CMD_INDEX_CBM_MAN8		0x00
+#define		CGBC_CMD_INDEX_CBM_AUTO32	0x03
+#define CGBC_CMD_DATA	0x04
+#define CGBC_CMD_ACCESS	0x0C
+
+struct cgbc_platform_data {
+	const struct resource	*ioresource;
+	unsigned int		num_ioresource;
+};
+
+static struct platform_device *cgbc_pdev;
+
+static int cgbc_detect_device(struct cgbc_device_data *cgbc)
+{
+	u16 status;
+	int ret;
+
+	ret = readx_poll_timeout(ioread16, cgbc->io_session + CGBC_SESSION_STATUS, status,
+				 status == CGBC_SESSION_STATUS_FREE, 0, 500000);
+
+	if (ret || ioread32(cgbc->io_session + CGBC_SESSION_ACCESS))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+static int cgbc_session_command(struct cgbc_device_data *cgbc, u8 cmd)
+{
+	int ret;
+	u8 val;
+
+	ret = readx_poll_timeout(ioread8, cgbc->io_session + CGBC_SESSION_CMD, val,
+				 val == CGBC_SESSION_CMD_IDLE, 0, 100000);
+	if (ret)
+		return ret;
+
+	iowrite8(cmd, cgbc->io_session + CGBC_SESSION_CMD);
+
+	ret = readx_poll_timeout(ioread8, cgbc->io_session + CGBC_SESSION_CMD, val,
+				 val == CGBC_SESSION_CMD_IDLE, 0, 100000);
+	if (ret)
+		return ret;
+
+	ret = (int)ioread8(cgbc->io_session + CGBC_SESSION_DATA);
+
+	iowrite8(CGBC_SESSION_STATUS_FREE,
+		 cgbc->io_session + CGBC_SESSION_STATUS);
+
+	return ret;
+}
+
+static int cgbc_session_request(struct cgbc_device_data *cgbc)
+{
+	unsigned int ret = cgbc_detect_device(cgbc);
+
+	if (ret)
+		return dev_err_probe(cgbc->dev, ret, "device not found\n");
+
+	cgbc->session = cgbc_session_command(cgbc, CGBC_SESSION_CMD_REQUEST);
+
+	/* the Board Controller sent us a wrong session handle, we cannot
+	 * communicate with it.
+	 */
+	if (cgbc->session < CGBC_SESSION_VALID_MIN ||
+	    cgbc->session > CGBC_SESSION_VALID_MAX) {
+		cgbc->session = 0;
+		return dev_err_probe(cgbc->dev, (cgbc->session < 0) ? cgbc->session : -ECONNREFUSED,
+				     "failed to get a valid session handle\n");
+	}
+
+	return 0;
+}
+
+static void cgbc_session_release(struct cgbc_device_data *cgbc)
+{
+	if (cgbc_session_command(cgbc, cgbc->session) != cgbc->session)
+		dev_err(cgbc->dev, "failed to release session\n");
+}
+
+static bool cgbc_command_lock(struct cgbc_device_data *cgbc)
+{
+	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_ACCESS);
+
+	return ioread8(cgbc->io_cmd + CGBC_CMD_ACCESS) == cgbc->session;
+}
+
+static void cgbc_command_unlock(struct cgbc_device_data *cgbc)
+{
+	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_ACCESS);
+}
+
+static int __cgbc_command(struct cgbc_device_data *cgbc, u8 *cmd, u8 cmd_size,
+			  u8 *data, u8 data_size, u8 *status)
+{
+	u8 checksum = 0, data_checksum = 0, istatus = 0, val;
+	int mode_change = -1;
+	bool lock;
+	int ret, i;
+
+	mutex_lock(&cgbc->lock);
+
+	/* request access */
+	ret = readx_poll_timeout(cgbc_command_lock, cgbc, lock, lock, 0, 100000);
+	if (ret)
+		goto out;
+
+	/* wait board controller is ready */
+	ret = readx_poll_timeout(ioread8, cgbc->io_cmd + CGBC_CMD_STROBE, val,
+				 val == CGBC_CMD_STROBE, 0, 100000);
+	if (ret)
+		goto release;
+
+	/* write command packet */
+	if (cmd_size <= 2) {
+		iowrite8(CGBC_CMD_INDEX_CBM_MAN8,
+			 cgbc->io_cmd + CGBC_CMD_INDEX);
+	} else {
+		iowrite8(CGBC_CMD_INDEX_CBM_AUTO32,
+			 cgbc->io_cmd + CGBC_CMD_INDEX);
+		if ((cmd_size % 4) != 0x03)
+			mode_change = (cmd_size & 0xFFFC) - 1;
+	}
+
+	for (i = 0; i < cmd_size; i++) {
+		iowrite8(cmd[i], cgbc->io_cmd + CGBC_CMD_DATA + (i % 4));
+		checksum ^= cmd[i];
+		if (mode_change == i)
+			iowrite8((i + 1) | CGBC_CMD_INDEX_CBM_MAN8,
+				 cgbc->io_cmd + CGBC_CMD_INDEX);
+	}
+
+	/* append checksum byte */
+	iowrite8(checksum, cgbc->io_cmd + CGBC_CMD_DATA + (i % 4));
+
+	/* perform command strobe */
+	iowrite8(cgbc->session, cgbc->io_cmd + CGBC_CMD_STROBE);
+
+	/* rewind cmd buffer index */
+	iowrite8(CGBC_CMD_INDEX_CBM_AUTO32,
+		 cgbc->io_cmd + CGBC_CMD_INDEX);
+
+	/* wait command completion */
+	ret = read_poll_timeout(ioread8, val, val == CGBC_CMD_STROBE, 0,
+				100000, false,
+				cgbc->io_cmd + CGBC_CMD_STROBE);
+	if (ret)
+		goto release;
+
+	istatus = ioread8(cgbc->io_cmd + CGBC_CMD_DATA);
+	checksum = istatus;
+
+	/* check command status */
+	switch (istatus & CGBC_MASK_STATUS) {
+	case CGBC_STATUS_DATA_READY:
+		if (istatus > data_size)
+			istatus = data_size;
+		for (i = 0; i < istatus; i++) {
+			data[i] = ioread8(cgbc->io_cmd +
+					  CGBC_CMD_DATA + ((i + 1) % 4));
+			checksum ^= data[i];
+		}
+		data_checksum = ioread8(cgbc->io_cmd +
+					CGBC_CMD_DATA + ((i + 1) % 4));
+		istatus &= CGBC_MASK_DATA_COUNT;
+		break;
+	case CGBC_STATUS_ERROR:
+	case CGBC_STATUS_CMD_READY:
+		data_checksum = ioread8(cgbc->io_cmd +
+					CGBC_CMD_DATA + 1);
+		if ((istatus & CGBC_MASK_STATUS) == CGBC_STATUS_ERROR)
+			ret = -EIO;
+		istatus = istatus & CGBC_MASK_ERROR_CODE;
+		break;
+	default:
+		data_checksum = ioread8(cgbc->io_cmd + CGBC_CMD_DATA + 1);
+		istatus &= CGBC_MASK_ERROR_CODE;
+		ret = -EIO;
+		break;
+	}
+
+	/* checksum verification */
+	if (ret == 0 && data_checksum != checksum)
+		ret = -EIO;
+
+release:
+	cgbc_command_unlock(cgbc);
+
+out:
+	mutex_unlock(&cgbc->lock);
+
+	if (status)
+		*status = istatus;
+
+	return ret;
+}
+
+int cgbc_command(struct cgbc_device_data *cgbc, void *cmd, unsigned int cmd_size,
+		 void *data, unsigned int data_size, u8 *status)
+{
+	return __cgbc_command(cgbc, (u8 *)cmd, cmd_size, (u8 *)data, data_size, status);
+}
+EXPORT_SYMBOL_GPL(cgbc_command);
+
+static struct mfd_cell cgbc_devs[] = {
+	{ .name = "cgbc-wdt"	},
+	{ .name = "cgbc-gpio"	},
+	{ .name = "cgbc-i2c", .id = 1 },
+	{ .name = "cgbc-i2c", .id = 2 },
+};
+
+static int cgbc_map(struct cgbc_device_data *cgbc)
+{
+	struct device *dev = cgbc->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *ioport;
+
+	ioport = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!ioport)
+		return -EINVAL;
+
+	cgbc->io_session = devm_ioport_map(dev, ioport->start,
+					   resource_size(ioport));
+	if (!cgbc->io_session)
+		return -ENOMEM;
+
+	ioport = platform_get_resource(pdev, IORESOURCE_IO, 1);
+	if (!ioport)
+		return -EINVAL;
+
+	cgbc->io_cmd = devm_ioport_map(dev, ioport->start,
+				       resource_size(ioport));
+	if (!cgbc->io_cmd)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static struct resource cgbc_ioresource[] = {
+	{
+		.start  = CGBC_IO_SESSION_BASE,
+		.end    = CGBC_IO_SESSION_END,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.start  = CGBC_IO_CMD_BASE,
+		.end    = CGBC_IO_CMD_END,
+		.flags  = IORESOURCE_IO,
+	},
+};
+
+static const struct cgbc_platform_data cgbc_platform_data = {
+	.ioresource = &cgbc_ioresource[0],
+	.num_ioresource = ARRAY_SIZE(cgbc_ioresource),
+};
+
+static int cgbc_create_platform_device(const struct cgbc_platform_data *pdata)
+{
+	const struct platform_device_info pdevinfo = {
+		.name = "cgbc",
+		.id = PLATFORM_DEVID_NONE,
+		.res = pdata->ioresource,
+		.num_res = pdata->num_ioresource,
+	};
+
+	cgbc_pdev = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(cgbc_pdev))
+		return PTR_ERR(cgbc_pdev);
+
+	return 0;
+}
+
+static ssize_t cgbc_version_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct cgbc_device_data *cgbc = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "CGBCP%c%c%c\n", cgbc->version.feature,
+			  cgbc->version.major, cgbc->version.minor);
+}
+
+static DEVICE_ATTR_RO(cgbc_version);
+
+static struct attribute *cgbc_attrs[] = {
+	&dev_attr_cgbc_version.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(cgbc);
+
+static int cgbc_get_version(struct cgbc_device_data *cgbc)
+{
+	u8 cmd = CGBC_CMD_GET_FW_REV;
+	u8 data[4];
+	int ret;
+
+	ret = cgbc_command(cgbc, &cmd, 1, &data, sizeof(data), NULL);
+	if (ret)
+		return ret;
+
+	cgbc->version.feature = data[0];
+	cgbc->version.major = data[1];
+	cgbc->version.minor = data[2];
+
+	return 0;
+}
+
+static int cgbc_init_device(struct cgbc_device_data *cgbc)
+{
+	int ret;
+
+	ret = cgbc_session_request(cgbc);
+	if (ret)
+		return ret;
+
+	ret = cgbc_get_version(cgbc);
+	if (ret)
+		return ret;
+
+	return mfd_add_devices(cgbc->dev, -1, cgbc_devs,
+			       ARRAY_SIZE(cgbc_devs), NULL, 0, NULL);
+}
+
+static int cgbc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cgbc_device_data *cgbc;
+	int ret;
+
+	cgbc = devm_kzalloc(dev, sizeof(*cgbc), GFP_KERNEL);
+	if (!cgbc)
+		return -ENOMEM;
+
+	cgbc->dev = dev;
+
+	ret = cgbc_map(cgbc);
+	if (ret)
+		return ret;
+
+	mutex_init(&cgbc->lock);
+
+	platform_set_drvdata(pdev, cgbc);
+
+	return cgbc_init_device(cgbc);
+}
+
+static void cgbc_remove(struct platform_device *pdev)
+{
+	struct cgbc_device_data *cgbc = platform_get_drvdata(pdev);
+
+	cgbc_session_release(cgbc);
+
+	mfd_remove_devices(&pdev->dev);
+}
+
+static struct platform_driver cgbc_driver = {
+	.driver		= {
+		.name		= "cgbc",
+		.dev_groups	= cgbc_groups,
+	},
+	.probe		= cgbc_probe,
+	.remove_new	= cgbc_remove,
+};
+
+static const struct dmi_system_id cgbc_dmi_table[] __initconst = {
+	{
+		.ident = "SA7",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "congatec"),
+			DMI_MATCH(DMI_BOARD_NAME, "conga-SA7"),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, cgbc_dmi_table);
+
+static int __init cgbc_init(void)
+{
+	const struct dmi_system_id *id;
+	int ret = -ENODEV;
+
+	id = dmi_first_match(cgbc_dmi_table);
+	if (IS_ERR_OR_NULL(id))
+		return ret;
+
+	ret = cgbc_create_platform_device(&cgbc_platform_data);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&cgbc_driver);
+}
+
+static void __exit cgbc_exit(void)
+{
+	platform_device_unregister(cgbc_pdev);
+	platform_driver_unregister(&cgbc_driver);
+}
+
+module_init(cgbc_init);
+module_exit(cgbc_exit);
+
+MODULE_DESCRIPTION("Congatec Board Controller Core Driver");
+MODULE_AUTHOR("Thomas Richard <thomas.richard@bootlin.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cgbc-core");
diff --git a/include/linux/mfd/cgbc.h b/include/linux/mfd/cgbc.h
new file mode 100644
index 000000000000..badbec4c7033
--- /dev/null
+++ b/include/linux/mfd/cgbc.h
@@ -0,0 +1,44 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Congatec Board Controller driver definitions
+ *
+ * Copyright (C) 2024 Bootlin
+ * Author: Thomas Richard <thomas.richard@bootlin.com>
+ */
+
+#ifndef _LINUX_MFD_CGBC_H_
+
+/**
+ * struct cgbc_version - Board Controller device version structure
+ * @feature:	Board Controller feature number
+ * @major:	Board Controller major revision
+ * @minor:	Board Controller minor revision
+ */
+struct cgbc_version {
+	unsigned char feature;
+	unsigned char major;
+	unsigned char minor;
+};
+
+/**
+ * struct cgbc_device_data - Internal representation of the Board Controller device
+ * @io_session:		Pointer to the session IO memory
+ * @io_cmd:		Pointer to the command IO memory
+ * @session:		Session id returned by the Board Controller
+ * @dev:		Pointer to kernel device structure
+ * @cgbc_version:	Board Controller version structure
+ * @mutex:		Board Controller mutex
+ */
+struct cgbc_device_data {
+	void __iomem		*io_session;
+	void __iomem		*io_cmd;
+	u8			session;
+	struct device		*dev;
+	struct cgbc_version	version;
+	struct mutex		lock;
+};
+
+int cgbc_command(struct cgbc_device_data *cgbc, void *cmd, unsigned int cmd_size,
+		 void *data, unsigned int data_size, u8 *status);
+
+#endif /*_LINUX_MFD_CGBC_H_*/