@@ -233,6 +233,16 @@ config GPIO_CADENCE
help
Say yes here to enable support for Cadence GPIO controller.
+config GPIO_CGBC
+ tristate "Congatec Board Controller GPIO support"
+ depends on MFD_CGBC
+ help
+ Select this option to enable GPIO support for the Congatec Board
+ Controller.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-cgbc.
+
config GPIO_CLPS711X
tristate "CLPS711X GPIO support"
depends on ARCH_CLPS711X || COMPILE_TEST
@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o
+obj-$(CONFIG_GPIO_CGBC) += gpio-cgbc.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
obj-$(CONFIG_GPIO_CROS_EC) += gpio-cros-ec.o
new file mode 100644
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Congatec Board Controller GPIO driver
+ *
+ * Copyright (C) 2024 Bootlin
+ * Author: Thomas Richard <thomas.richard@bootlin.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/cgbc.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#define CGBC_GPIO_NGPIO 14
+
+#define CGBC_GPIO_CMD_GET 0x64
+#define CGBC_GPIO_CMD_SET 0x65
+#define CGBC_GPIO_CMD_DIR_GET 0x66
+#define CGBC_GPIO_CMD_DIR_SET 0x67
+
+struct cgbc_gpio_data {
+ struct gpio_chip chip;
+ struct cgbc_device_data *cgbc;
+ struct mutex lock;
+};
+
+static int cgbc_gpio_cmd(struct cgbc_device_data *cgbc,
+ u8 cmd0, u8 cmd1, u8 cmd2, u8 *value)
+{
+ u8 cmd[3] = {cmd0, cmd1, cmd2};
+
+ return cgbc_command(cgbc, cmd, sizeof(cmd), value, 1, NULL);
+}
+
+static int cgbc_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+ struct cgbc_device_data *cgbc = gpio->cgbc;
+ int ret;
+ u8 val;
+
+ scoped_guard(mutex, &gpio->lock)
+ ret = cgbc_gpio_cmd(cgbc, CGBC_GPIO_CMD_GET, (offset > 7) ? 1 : 0, 0, &val);
+
+ offset %= 8;
+
+ if (ret)
+ return ret;
+ else
+ return (int)(val & (u8)BIT(offset));
+}
+
+static void __cgbc_gpio_set(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+ struct cgbc_device_data *cgbc = gpio->cgbc;
+ u8 val;
+ int ret;
+
+ ret = cgbc_gpio_cmd(cgbc, CGBC_GPIO_CMD_GET, (offset > 7) ? 1 : 0, 0, &val);
+ if (ret)
+ return;
+
+ if (value)
+ val |= BIT(offset % 8);
+ else
+ val &= ~((u8)BIT(offset % 8));
+
+ cgbc_gpio_cmd(cgbc, CGBC_GPIO_CMD_SET, (offset > 7) ? 1 : 0, val, &val);
+}
+
+static void cgbc_gpio_set(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+
+ scoped_guard(mutex, &gpio->lock)
+ __cgbc_gpio_set(chip, offset, value);
+}
+
+static int cgbc_gpio_direction_set(struct gpio_chip *chip,
+ unsigned int offset, int direction)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+ struct cgbc_device_data *cgbc = gpio->cgbc;
+ int ret;
+ u8 val;
+
+ ret = cgbc_gpio_cmd(cgbc, CGBC_GPIO_CMD_DIR_GET, (offset > 7) ? 1 : 0, 0, &val);
+ if (ret)
+ goto end;
+
+ if (direction == GPIO_LINE_DIRECTION_IN)
+ val &= ~((u8)BIT(offset % 8));
+ else
+ val |= BIT(offset % 8);
+
+ ret = cgbc_gpio_cmd(cgbc, CGBC_GPIO_CMD_DIR_SET, (offset > 7) ? 1 : 0, val, &val);
+
+end:
+ return ret;
+}
+
+static int cgbc_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+
+ guard(mutex)(&gpio->lock);
+ return cgbc_gpio_direction_set(chip, offset, GPIO_LINE_DIRECTION_IN);
+}
+
+static int cgbc_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+
+ guard(mutex)(&gpio->lock);
+
+ __cgbc_gpio_set(chip, offset, value);
+ return cgbc_gpio_direction_set(chip, offset, GPIO_LINE_DIRECTION_OUT);
+}
+
+static int cgbc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ struct cgbc_gpio_data *gpio = gpiochip_get_data(chip);
+ struct cgbc_device_data *cgbc = gpio->cgbc;
+ int ret;
+ u8 val;
+
+ scoped_guard(mutex, &gpio->lock)
+ ret = cgbc_gpio_cmd(cgbc, CGBC_GPIO_CMD_DIR_GET, (offset > 7) ? 1 : 0, 0, &val);
+
+ if (ret)
+ return ret;
+
+ if (val & BIT(offset % 8))
+ return GPIO_LINE_DIRECTION_OUT;
+ else
+ return GPIO_LINE_DIRECTION_IN;
+}
+
+static int cgbc_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cgbc_device_data *cgbc = dev_get_drvdata(dev->parent);
+ struct cgbc_gpio_data *gpio;
+ struct gpio_chip *chip;
+ int ret;
+
+ gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ gpio->cgbc = cgbc;
+
+ platform_set_drvdata(pdev, gpio);
+
+ chip = &gpio->chip;
+ chip->label = dev_name(&pdev->dev);
+ chip->owner = THIS_MODULE;
+ chip->parent = dev;
+ chip->base = -1;
+ chip->direction_input = cgbc_gpio_direction_input;
+ chip->direction_output = cgbc_gpio_direction_output;
+ chip->get_direction = cgbc_gpio_get_direction;
+ chip->get = cgbc_gpio_get;
+ chip->set = cgbc_gpio_set;
+ chip->ngpio = CGBC_GPIO_NGPIO;
+
+ ret = devm_mutex_init(dev, &gpio->lock);
+ if (ret)
+ return ret;
+
+ ret = devm_gpiochip_add_data(dev, chip, gpio);
+ if (ret)
+ return dev_err_probe(dev, ret, "Could not register GPIO chip\n");
+
+ return 0;
+}
+
+static struct platform_driver cgbc_gpio_driver = {
+ .driver = {
+ .name = "cgbc-gpio",
+ },
+ .probe = cgbc_gpio_probe,
+};
+
+module_platform_driver(cgbc_gpio_driver);
+
+MODULE_DESCRIPTION("Congatec Board Controller GPIO Driver");
+MODULE_AUTHOR("Thomas Richard <thomas.richard@bootlin.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cgbc-gpio");
Add gpio support for the Congatec Board Controller. Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> --- drivers/gpio/Kconfig | 10 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-cgbc.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 207 insertions(+)