diff mbox series

[2/2] arm64: dts: amlogic: add watchdog node for A4 SoCs

Message ID 20240709-a4-a5_watchdog-v1-2-2ae852e05ec2@amlogic.com (mailing list archive)
State New
Headers show
Series Watchdog: support for Amlogic SoC A4/A5 | expand

Commit Message

Xianwei Zhao via B4 Relay July 9, 2024, 8:48 a.m. UTC
From: Huqiang Qin <huqiang.qin@amlogic.com>

Add watchdog device.

Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Neil Armstrong July 9, 2024, 8:58 a.m. UTC | #1
On 09/07/2024 10:48, Xianwei Zhao via B4 Relay wrote:
> From: Huqiang Qin <huqiang.qin@amlogic.com>
> 
> Add watchdog device.
> 
> Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
> index b6106ad4a072..496c3a2bcf25 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
> @@ -52,6 +52,12 @@ apb: bus@fe000000 {
>   			#size-cells = <2>;
>   			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>   
> +			watchdog@2100 {
> +				compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
> +				reg = <0x0 0x2100 0x0 0x10>;
> +				clocks = <&xtal>;
> +			};
> +
>   			uart_b: serial@7a000 {
>   				compatible = "amlogic,a4-uart",
>   					     "amlogic,meson-s4-uart";
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
index b6106ad4a072..496c3a2bcf25 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
@@ -52,6 +52,12 @@  apb: bus@fe000000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			uart_b: serial@7a000 {
 				compatible = "amlogic,a4-uart",
 					     "amlogic,meson-s4-uart";