Show patches with: Submitter = Daniel Golle       |    Archived = No       |   132 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[01/40] rt2x00: rt2800lib: move rt2800_drv_data declaration into rt2800lib.h - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[02/15] rt2x00: add throughput LED trigger [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - 1 --- 2022-09-16 Daniel Golle kvalo Superseded
[02/40] rt2x00: rt2800lib: introduce RT2800_HAS_HIGH_SHARED_MEM flag - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[03/15] rt2x00: add support for external PA on MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[03/40] rt2x00: rt2800: serialize shared memory access - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[04/15] rt2x00: add RF self TXDC calibration for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[04/40] rt2x00: rt2800lib: fix beacon generation on RT3593 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[05/15] rt2x00: add r calibration for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[05/40] rt2x00: rt2800lib: add hw_beacon_count field to struct rt2800_drv_data - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[06/15] rt2x00: add RXDCOC calibration for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[06/40] rt2x00: rt2800lib: init additional beacon offset registers - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[07/15] rt2x00: add RXIQ calibration for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[07/40] rt2x00: rt2800lib: fix max supported beacon count for RT3593 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[08/15] rt2x00: don't run Rt5592 IQ calibration on MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[08/40] rt2x00: allow to build rt2800soc module for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[09/15] rt2x00: add TX LOFT calibration for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[09/40] rt2x00: rt2800lib: enable support for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[1/2] mt76: support reading EEPROM data embedded in fdt [1/2] mt76: support reading EEPROM data embedded in fdt - - - --- 2021-08-25 Daniel Golle nbd Accepted
[1/2] rt2800: fix LNA gain assignment for MT7620 - - - --- 2017-04-17 Daniel Golle kvalo Accepted
[1/2] wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981 [1/2] wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981 - - - --- 2023-11-06 Daniel Golle nbd Accepted
[10/15] rt2x00: move helper functions up in file [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[10/40] rt2x00: rt2800lib: add rf_vals for RF3853 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[11/15] rt2x00: fix HT20/HT40 bandwidth switch on MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[11/40] rt2x00: rt2800lib: enable VCO calibration for RF3853 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[12/15] rt2x00: set correct TX_SW_CFG1 MAC register for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[12/40] rt2x00: rt2800lib: add channel configuration function for RF3853 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[13/15] rt2x00: set VGC gain for both chains of MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[13/40] rt2x00: rt2800lib: enable RF3853 support - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[14/15] rt2x00: set SoC wmac clock register [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[14/40] rt2x00: rt2800lib: add MAC register initialization for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[15/15] rt2x00: correctly set BBP register 86 for MT7620 [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine 1 - - --- 2022-09-16 Daniel Golle kvalo Superseded
[15/40] rt2x00: rt2800soc: fix rt2800soc_disable_radio for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[16/40] rt2x00: rt2800lib: add BBP register initialization for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[17/40] rt2x00: rt2800lib: add RFCSR initialization for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[18/40] rt2x00: rt2800lib: use the extended EEPROM map for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[19/40] rt2x00: rt2800lib: force rf type to RF3853 on RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[2/2] dt: bindings: net: mt76: add eeprom-data property [1/2] mt76: support reading EEPROM data embedded in fdt 1 - - --- 2021-08-25 Daniel Golle nbd Accepted
[2/2] rt2800: do VCO calibration after programming ALC - - - --- 2017-04-17 Daniel Golle kvalo Accepted
[2/2] wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz band [1/2] wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981 - - - --- 2023-11-06 Daniel Golle nbd Accepted
[20/40] rt2x00: rt2800lib: add channel configuration code for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[21/40] rt2x00: rt2800lib: fix txpower_to_dev function for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[22/40] rt2x00: rt2800lib: use correct txpower calculation function for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[23/40] rt2x00: rt2800lib: hardcode txmixer gain values to zero for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[24/40] rt2x00: rt2800lib: use correct [RT]XWI size for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[25/40] rt2x00: rt2800lib: use correct beacon base for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[26/40] rt2x00: rt2800lib: use correct beacon count for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[27/40] rt2x00: rt2800lib: fix antenna configuration for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[28/40] rt2x00: rt2800lib: fix LNA gain configuration for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[29/40] rt2x00: rt2800lib: fix VGC setup for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[30/40] rt2x00: rt2800lib: fix EEPROM LNA validation for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[31/40] rt2x00: rt2800lib: fix txpower compensation for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[32/40] rt2x00: rt2800lib: enable RT2800_HAS_HIGH_SHARED_MEM for RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[33/40] rt2x00: rt2800lib: use high memory for beacons on RT3883 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[34/40] rt2x00: rt2800mmio: add a workaround for spurious TX_FIFO_STATUS interrupts - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[35/40] rt2x00: rt2x00pci: set PCI MWI only if supported - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[36/40] rt2x00: support for for RT3352 with external PA - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[37/40] rt2x00: add support for RT3352 with 20MHz crystal - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[38/40] rt2x00: add support for RT5350 WiSoC 1 - 1 --- 2017-01-13 Daniel Golle kvalo Changes Requested
[39/40] rt2x00: fix rf id for RT3352 - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[40/40] rt2x00: correctly set HT20/HT40 filter - - - --- 2017-01-13 Daniel Golle kvalo Changes Requested
[net-next,v3,1/2] dt-bindings: mt76: support setting per-band MAC address [net-next,v3,1/2] dt-bindings: mt76: support setting per-band MAC address - - - --- 2023-07-31 Daniel Golle nbd New
[RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine - - - --- 2022-09-16 Daniel Golle kvalo Superseded
[v2,01/14] rt2x00: rt2800lib: move rt2800_drv_data declaration into rt2800lib.h - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,01/16] rt2x00: define RF5592 in init_eeprom routine rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,02/14] rt2x00: rt2800lib: introduce RT2800_HAS_HIGH_SHARED_MEM flag - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,02/16] rt2x00: add throughput LED trigger rt2x00: OpenWrt patches improving MT7620 1 - 1 --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,03/14] rt2x00: rt2800: serialize shared memory access - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,03/16] rt2x00: add support for external PA on MT7620 rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,04/14] rt2x00: rt2800lib: fix beacon generation on RT3593 - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,04/16] rt2x00: move up and reuse busy wait functions rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,05/14] rt2x00: rt2800lib: add hw_beacon_count field to struct rt2800_drv_data - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,05/16] rt2x00: add RF self TXDC calibration for MT7620 rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,06/14] rt2x00: rt2800lib: init additional beacon offset registers - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,06/16] rt2x00: add r calibration for MT7620 rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,07/14] rt2x00: rt2800lib: fix max supported beacon count for RT3593 - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,07/16] rt2x00: add RXDCOC calibration for MT7620 rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,08/14] rt2x00: rt2800mmio: add a workaround for spurious TX_FIFO_STATUS interrupts - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,08/16] rt2x00: add RXIQ calibration for MT7620 rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,09/14] rt2x00: rt2x00pci: set PCI MWI only if supported - - - --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,09/16] rt2x00: don't run Rt5592 IQ calibration on MT7620 rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,1/2] dt-bindings: mt76: support setting per-band MAC address [v2,1/2] dt-bindings: mt76: support setting per-band MAC address - - - --- 2023-07-28 Daniel Golle nbd Superseded
[v2,1/2] dt-bindings: net: wireless: mt76: add bindings for MT7981 wifi: mt76: mt7915: add support for MT7981 1 - - --- 2023-05-15 Daniel Golle nbd Accepted
[v2,10/14] rt2x00: rt2800lib: correctly set HT20/HT40 filter 1 - - --- 2017-01-16 Daniel Golle kvalo Accepted
[v2,10/16] rt2x00: add TX LOFT calibration for MT7620 rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,11/14] rt2x00: rt2800lib: fix rf id for RT3352 1 - - --- 2017-01-16 Daniel Golle kvalo Accepted
[v2,11/16] rt2x00: move helper functions up in file rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,12/14] rt2x00: rt2800lib: support for for RT3352 with external PA 1 - - --- 2017-01-16 Daniel Golle kvalo Accepted
[v2,12/16] rt2x00: fix HT20/HT40 bandwidth switch on MT7620 rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,13/14] rt2x00: rt2800lib: add support for RT3352 with 20MHz crystal - - - --- 2017-01-16 Daniel Golle kvalo Superseded
[v2,13/16] rt2x00: set correct TX_SW_CFG1 MAC register for MT7620 rt2x00: OpenWrt patches improving MT7620 - - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,14/14] rt2x00: add support for RT5350 WiSoC 1 - 1 --- 2017-01-16 Daniel Golle kvalo Changes Requested
[v2,14/16] rt2x00: set VGC gain for both chains of MT7620 rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,15/16] rt2x00: set SoC wmac clock register rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,16/16] rt2x00: correctly set BBP register 86 for MT7620 rt2x00: OpenWrt patches improving MT7620 1 - - --- 2022-09-17 Daniel Golle kvalo Superseded
[v2,2/2] wifi: mt76: mt7915: add support for MT7981 wifi: mt76: mt7915: add support for MT7981 - 1 - --- 2023-05-15 Daniel Golle nbd Accepted
[v2,2/2] wifi: mt76: support per-band MAC addresses from OF child nodes [v2,1/2] dt-bindings: mt76: support setting per-band MAC address - - - --- 2023-07-28 Daniel Golle nbd Superseded
[v2] mt76: eeprom: tolerate corrected bit-flips [v2] mt76: eeprom: tolerate corrected bit-flips 1 - - --- 2021-11-25 Daniel Golle nbd Accepted
[v2] rt2800: remove errornous duplicate condition [v2] rt2800: remove errornous duplicate condition 1 - - --- 2019-11-02 Daniel Golle kvalo Accepted
[v2] rt2x00: reverse external PA capability flag logic - - - --- 2017-04-10 Daniel Golle kvalo Superseded
[v3,01/16] rt2x00: define RF5592 in init_eeprom routine rt2x00: OpenWrt patches improving MT7620 (and more) 1 - - --- 2022-09-17 Daniel Golle kvalo Accepted
« 1 2 »