Show patches with: Submitter = Wen Gong       |    Archived = No       |   222 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/2] mac80211: Save sk_pacing_shift to ieee80211_hw Change sk_pacing_shift in ieee80211_hw for best tx throughput - - - --- 2018-07-26 Wen Gong jmberg Superseded
[1/2] mac80211: save ssid info to ieee80211_bss_conf while assoc mac80211/ath10k: save ssid info for STATION mode - - - --- 2020-12-07 Wen Gong jmberg Accepted
[1/3] ath10k: add wmi service peer stat info for wmi tlv ath10k: correct tx/rx bitrate for QCA6174 PCIe and SDIO - - - --- 2020-08-13 Wen Gong kvalo Accepted
[1/3] ath11k: add ath11k_qmi_free_resource() for recovery ath11k: add feature for device recovery - - - --- 2021-10-11 Wen Gong kvalo Changes Requested
[1/4] ath10k: enable firmware peer stats info for wmi tlv ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-23 Wen Gong kvalo Changes Requested
[1/7] ath10k: enable RX bundle receive for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[1/9] cfg80211: add power type definition for 6G Hz cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[2/2] ath10k: pass the ssid info to get the correct bss entity mac80211/ath10k: save ssid info for STATION mode - - - --- 2020-12-07 Wen Gong kvalo Accepted
[2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips Change sk_pacing_shift in ieee80211_hw for best tx throughput - - - --- 2018-07-26 Wen Gong jmberg Superseded
[2/3] ath10k: remove return for NL80211_STA_INFO_TX_BITRATE ath10k: correct tx/rx bitrate for QCA6174 PCIe and SDIO - - - --- 2020-08-13 Wen Gong kvalo Accepted
[2/3] ath11k: add support for device recovery for QCA6390 ath11k: add feature for device recovery - - - --- 2021-10-11 Wen Gong kvalo Changes Requested
[2/4] ath10k: add rx bitrate report for SDIO ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-23 Wen Gong kvalo Changes Requested
[2/7] ath10k: change max RX bundle size from 8 to 32 for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[2/9] mac80211: add definition of regulatory info in 6G Hz operation information cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[3/3] ath10k: enable supports_peer_stats_info for QCA6174 PCI devices ath10k: correct tx/rx bitrate for QCA6174 PCIe and SDIO - - - --- 2020-08-13 Wen Gong kvalo Accepted
[3/3] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base ath11k: add feature for device recovery - - - --- 2021-10-11 Wen Gong kvalo Changes Requested
[3/4] ath10k: add bitrate parse for peer stats info ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-23 Wen Gong kvalo Changes Requested
[3/7] ath10k: add workqueue for RX path of sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[3/9] mac80211: add parse regulatory info in 6G Hz operation information cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[4/4] ath10k: correct tx bitrate of iw for SDIO ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-23 Wen Gong kvalo Changes Requested
[4/7] ath10k: disable TX complete indication of htt for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[4/9] cfg80211: add definition for 6G power spectral density(psd) cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[5/7] ath10k: add htt TX bundle for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[5/9] cfg80211: save power spectral density(psd) of regulatory rule cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[6/7] ath10k: enable alt data of TX path for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[6/9] mac80211: add definition for transmit power envelope element cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[7/7] ath10k: enable napi on RX path for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-20 Wen Gong kvalo Changes Requested
[7/9] mac80211: add parse transmit power envelope element cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[8/9] mac80211: add transmit power envelope element and power constraint in bss_conf cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[9/9] mac80211: save transmit power envelope element and power constraint cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-05-17 Wen Gong jmberg Changes Requested
[RFC] ath10k: change to do napi_enable and napi_disable when insmod and rmmod for sdio [RFC] ath10k: change to do napi_enable and napi_disable when insmod and rmmod for sdio - - - --- 2020-02-14 Wen Gong kvalo RFC
[RFC] ath11k: fix blocked for more than 120 seconds caused by reg update [RFC] ath11k: fix blocked for more than 120 seconds caused by reg update - - - --- 2020-12-22 Wen Gong kvalo RFC
[v10,1/2] ath10k: add htt TX bundle for sdio ath10k: improve throughout of TX of sdio - - - --- 2020-04-10 Wen Gong kvalo Accepted
[v10,2/2] ath10k: enable alt data of TX path for sdio ath10k: improve throughout of TX of sdio - - - --- 2020-04-10 Wen Gong kvalo Accepted
[v2,1/2] ath10k: add refcount for ath10k_core_restart start recovery process when payload length overflow for sdio - - - --- 2019-12-25 Wen Gong kvalo Changes Requested
[v2,1/2] mac80211: Change sk_pacing_shift saved to ieee80211_hw Change sk_pacing_shift in ieee80211_hw for best tx throughput - - - --- 2018-08-08 Wen Gong jmberg Accepted
[v2,1/2] nl80211: vendor-cmd: qca: add dynamic SAR power limits ath10k: SAR power limit vendor command - - - --- 2020-07-27 Wen Gong jmberg Superseded
[v2,1/3] ath11k: add ath11k_qmi_free_resource() for recovery ath11k: add feature for device recovery - - - --- 2021-10-13 Wen Gong kvalo Superseded
[v2,1/4] ath10k: enable firmware peer stats info for wmi tlv ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-27 Wen Gong kvalo Accepted
[v2,1/7] ath10k: enable RX bundle receive for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,1/8] cfg80211: add power type definition for 6 GHz cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Changes Requested
[v2,2/2] ath10k: allow dynamic SAR power limits to be configured ath10k: SAR power limit vendor command - - - --- 2020-07-27 Wen Gong kvalo Rejected
[v2,2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips Change sk_pacing_shift in ieee80211_hw for best tx throughput - - - --- 2018-08-08 Wen Gong kvalo Changes Requested
[v2,2/2] ath10k: start recovery process when payload length exceeds max htc length for sdio start recovery process when payload length overflow for sdio - - - --- 2019-12-25 Wen Gong kvalo Changes Requested
[v2,2/3] ath11k: add support for device recovery for QCA6390 ath11k: add feature for device recovery - - - --- 2021-10-13 Wen Gong kvalo Superseded
[v2,2/4] ath10k: add rx bitrate report for SDIO ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-27 Wen Gong kvalo Accepted
[v2,2/7] ath10k: change max RX bundle size from 8 to 32 for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,2/8] mac80211: add definition of regulatory info in 6 GHz operation information cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Accepted
[v2,3/3] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base ath11k: add feature for device recovery - - - --- 2021-10-13 Wen Gong kvalo Superseded
[v2,3/4] ath10k: add bitrate parse for peer stats info ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-27 Wen Gong kvalo Accepted
[v2,3/7] ath10k: add workqueue for RX path of sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,3/8] mac80211: add parse regulatory info in 6 GHz operation information cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Changes Requested
[v2,4/4] ath10k: correct tx bitrate of iw for SDIO ath10k: sdio: add support for rx/tx bitrate reporting - - - --- 2020-04-27 Wen Gong kvalo Accepted
[v2,4/7] ath10k: disable TX complete indication of htt for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,4/8] cfg80211: add definition for 6 GHz power spectral density(psd) cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Changes Requested
[v2,5/7] ath10k: add htt TX bundle for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,5/8] cfg80211: save power spectral density(psd) of regulatory rule cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Changes Requested
[v2,6/7] ath10k: enable alt data of TX path for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,6/8] mac80211: add definition for transmit power envelope element cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Accepted
[v2,7/7] ath10k: enable napi on RX path for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-27 Wen Gong kvalo Changes Requested
[v2,7/8] mac80211: add parse transmit power envelope element cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Accepted
[v2,8/8] mac80211: save transmit power envelope element and power constraint cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-08-20 Wen Gong jmberg Changes Requested
[v2] ath10k: add flag to protect napi operation to avoid dead loop hang for SDIO [v2] ath10k: add flag to protect napi operation to avoid dead loop hang for SDIO - - - --- 2020-08-24 Wen Gong kvalo Superseded
[v2] ath10k: add fw coredump for sdio when firmware assert [v2] ath10k: add fw coredump for sdio when firmware assert - - - --- 2019-08-30 Wen Gong kvalo Changes Requested
[v2] ath10k: add NL80211_FEATURE_ND_RANDOM_MAC_ADDR for NLO [v2] ath10k: add NL80211_FEATURE_ND_RANDOM_MAC_ADDR for NLO - - - --- 2019-11-08 Wen Gong kvalo Accepted
[v2] ath10k: add peer id check in ath10k_peer_find_by_id [v2] ath10k: add peer id check in ath10k_peer_find_by_id - - 1 --- 2019-04-29 Wen Gong kvalo Accepted
[v2] ath10k: add retry mechanism for ath10k_start [v2] ath10k: add retry mechanism for ath10k_start - - - --- 2020-01-20 Wen Gong kvalo Rejected
[v2] ath10k: add support for simulate crash on SDIO chip [v2] ath10k: add support for simulate crash on SDIO chip - - 1 --- 2019-04-29 Wen Gong kvalo Changes Requested
[v2] ath10k: Convert wow pattern from 802.3 to 802.11 - - - --- 2018-04-12 Wen Gong kvalo Accepted
[v2] ath10k: drop RX skb with invalid length for sdio [v2] ath10k: drop RX skb with invalid length for sdio - - - --- 2019-12-31 Wen Gong kvalo Accepted
[v2] ath10k: drop the TX packet which size exceed credit size for sdio [v2] ath10k: drop the TX packet which size exceed credit size for sdio - - - --- 2020-04-22 Wen Gong kvalo Accepted
[v2] ath10k: Remove ATH10K_STATE_RESTARTED in simulate fw crash [v2] ath10k: Remove ATH10K_STATE_RESTARTED in simulate fw crash - - - --- 2019-04-12 Wen Gong kvalo Changes Requested
[v2] ath10k: remove the max_sched_scan_reqs value [v2] ath10k: remove the max_sched_scan_reqs value - - - --- 2019-11-14 Wen Gong kvalo Accepted
[v2] ath10k: support NET_DETECT WoWLAN feature [v2] ath10k: support NET_DETECT WoWLAN feature - - - --- 2018-08-15 Wen Gong kvalo Superseded
[v2] ath11k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE if NSS ratio enabled [v2] ath11k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE if NSS ratio enabled - - - --- 2021-10-13 Wen Gong kvalo Accepted
[v2] mac80211: do intersection with he mcs and nss set of peer and own [v2] mac80211: do intersection with he mcs and nss set of peer and own - - - --- 2020-12-25 Wen Gong jmberg Superseded
[v2] mac80211: Store max_mtu in ieee80211_hw [v2] mac80211: Store max_mtu in ieee80211_hw - - - --- 2019-09-04 Wen Gong jmberg Superseded
[v2] wireless: add check of field VHT Extended NSS BW Capable for 160/80+80 MHz setting [v2] wireless: add check of field VHT Extended NSS BW Capable for 160/80+80 MHz setting - - - --- 2021-05-21 Wen Gong jmberg Superseded
[v3,1/2] ath10k: add bus type for each layout of coredump add fw coredump for sdio when firmware assert - - - --- 2019-09-23 Wen Gong kvalo Changes Requested
[v3,1/2] ath10k: add refcount for ath10k_core_restart start recovery process when payload length overflow for sdio - - - --- 2019-12-31 Wen Gong kvalo Superseded
[v3,1/2] mac80211: remove NSS number of 160MHz if not support 160MHz for HE mac80211: set NSS correct for supported HE-MCS and NSS set - - - --- 2021-01-05 Wen Gong jmberg Accepted
[v3,1/3] ath11k: add ath11k_qmi_free_resource() for recovery ath11k: add feature for device recovery - - - --- 2021-10-15 Wen Gong kvalo Changes Requested
[v3,1/8] ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
[v3,1/9] mac80211: add power type definition for 6 GHz cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-09-03 Wen Gong jmberg Superseded
[v3,2/2] ath10k: add fw coredump for sdio when firmware assert add fw coredump for sdio when firmware assert - - - --- 2019-09-23 Wen Gong kvalo Changes Requested
[v3,2/2] ath10k: start recovery process when payload length exceeds max htc length for sdio start recovery process when payload length overflow for sdio - - - --- 2019-12-31 Wen Gong kvalo Superseded
[v3,2/2] mac80211: do intersection with he mcs and nss set of peer and own mac80211: set NSS correct for supported HE-MCS and NSS set - - - --- 2021-01-05 Wen Gong jmberg Accepted
[v3,2/3] ath11k: add support for device recovery for QCA6390 ath11k: add feature for device recovery - - - --- 2021-10-15 Wen Gong kvalo Changes Requested
[v3,2/8] ath10k: enable RX bundle receive for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
[v3,2/9] ieee80211: add definition of regulatory info in 6 GHz operation information cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-09-03 Wen Gong jmberg Superseded
[v3,3/3] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base ath11k: add feature for device recovery - - - --- 2021-10-15 Wen Gong kvalo Changes Requested
[v3,3/8] ath10k: change max RX bundle size from 8 to 32 for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
[v3,3/9] mac80211: add parse regulatory info in 6 GHz operation information cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-09-03 Wen Gong jmberg Superseded
[v3,4/8] ath10k: add workqueue for RX path of sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
[v3,4/9] cfg80211: add definition for 6 GHz power spectral density(psd) cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-09-03 Wen Gong jmberg Superseded
[v3,5/8] ath10k: disable TX complete indication of htt for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
[v3,5/9] cfg80211: save power spectral density(psd) of regulatory rule cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-09-03 Wen Gong jmberg Superseded
[v3,6/8] ath10k: add htt TX bundle for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
[v3,6/9] ieee80211: add definition for transmit power envelope element cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP - - - --- 2021-09-03 Wen Gong jmberg Superseded
[v3,7/8] ath10k: enable alt data of TX path for sdio ath10k: improve throughout of tcp/udp TX/RX of sdio - - - --- 2019-08-28 Wen Gong kvalo Changes Requested
« 1 2 3 »