From patchwork Fri Aug 14 00:42:55 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luis Rodriguez X-Patchwork-Id: 41319 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n7E0hi5X031337 for ; Fri, 14 Aug 2009 00:43:45 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756517AbZHNAnj (ORCPT ); Thu, 13 Aug 2009 20:43:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756521AbZHNAni (ORCPT ); Thu, 13 Aug 2009 20:43:38 -0400 Received: from bombadil.infradead.org ([18.85.46.34]:45305 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756516AbZHNAnE (ORCPT ); Thu, 13 Aug 2009 20:43:04 -0400 Received: from mcgrof by bombadil.infradead.org with local (Exim 4.69 #1 (Red Hat Linux)) id 1Mbksr-0003V7-UN; Fri, 14 Aug 2009 00:43:05 +0000 From: "Luis R. Rodriguez" To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, "Luis R. Rodriguez" Subject: [PATCH v2 16/25] wireless: organize group drivers alphabetically Date: Thu, 13 Aug 2009 20:42:55 -0400 Message-Id: <1250210584-13374-17-git-send-email-lrodriguez@atheros.com> X-Mailer: git-send-email 1.6.2.rc1.3.g81d3f In-Reply-To: <1250210584-13374-1-git-send-email-lrodriguez@atheros.com> References: <1250210584-13374-1-git-send-email-lrodriguez@atheros.com> Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org Signed-off-by: Luis R. Rodriguez --- drivers/net/wireless/Kconfig | 286 +++++++++++++++++++++--------------------- 1 files changed, 144 insertions(+), 142 deletions(-) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 4ed50f6..a267887 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -110,77 +110,73 @@ menuconfig WLAN_80211 This option does not affect the kernel build, it only lets you choose drivers. -menuconfig MARVELL_80211 - bool "Marvell" - depends on WLAN_80211 - ---help--- - This will enable the support for Marvell wireless drivers. This includes - the drivers: libertas, libertas_tf, and mwl8k. +source "drivers/net/wireless/ath/Kconfig" -if MARVELL_80211 -config LIBERTAS - tristate "Marvell 8xxx Libertas WLAN driver support" +config ATMEL_80211 + bool "Atmel" depends on WLAN_80211 - select WIRELESS_EXT - select LIB80211 - select FW_LOADER ---help--- - A library for Marvell Libertas 8xxx devices. - -config LIBERTAS_USB - tristate "Marvell Libertas 8388 USB 802.11b/g cards" - depends on LIBERTAS && USB - ---help--- - A driver for Marvell Libertas 8388 USB devices. + This will enable the support for Atmel wireless drivers. -config LIBERTAS_CS - tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" - depends on LIBERTAS && PCMCIA - select FW_LOADER - ---help--- - A driver for Marvell Libertas 8385 CompactFlash devices. +if ATMEL_80211 -config LIBERTAS_SDIO - tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards" - depends on LIBERTAS && MMC - ---help--- - A driver for Marvell Libertas 8385/8686/8688 SDIO devices. +config ATMEL + tristate "Atmel at76c50x chipset 802.11b support" + depends on (PCI || PCMCIA) && WLAN_80211 + select WIRELESS_EXT + select FW_LOADER + select CRC32 + ---help--- + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. -config LIBERTAS_SPI - tristate "Marvell Libertas 8686 SPI 802.11b/g cards" - depends on LIBERTAS && SPI - ---help--- - A driver for Marvell Libertas 8686 SPI devices. + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + -config LIBERTAS_DEBUG - bool "Enable full debugging output in the Libertas module." - depends on LIBERTAS - ---help--- - Debugging support. +config PCI_ATMEL + tristate "Atmel at76c506 PCI cards" + depends on ATMEL && PCI + ---help--- + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. -config LIBERTAS_THINFIRM - tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" - depends on WLAN_80211 && MAC80211 +config PCMCIA_ATMEL + tristate "Atmel at76c502/at76c504 PCMCIA cards" + depends on ATMEL && PCMCIA + select WIRELESS_EXT select FW_LOADER + select CRC32 ---help--- - A library for Marvell Libertas 8xxx devices using thinfirm. + Enable support for PCMCIA cards containing the + Atmel at76c502 and at76c504 chips. -config LIBERTAS_THINFIRM_USB - tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" - depends on LIBERTAS_THINFIRM && USB - ---help--- - A driver for Marvell Libertas 8388 USB devices using thinfirm. +config AT76C50X_USB + tristate "Atmel at76c503/at76c505/at76c505a USB cards" + depends on MAC80211 && WLAN_80211 && USB + select FW_LOADER + ---help--- + Enable support for USB Wireless devices using Atmel at76c503, + at76c505 or at76c505a chips. -config MWL8K - tristate "Marvell 88W8xxx PCI/PCIe Wireless support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL +endif # ATMEL_80211 + +config BROADCOM_80211 + bool "Broadcom wireless driver support" + depends on WLAN_80211 ---help--- - This driver supports Marvell TOPDOG 802.11 wireless cards. + This will enable the support for Broadcom wireless drivers. This + includes b43 driver and the b43legacy driver. - To compile this driver as a module, choose M here: the module - will be called mwl8k. If unsure, say N. +if BROADCOM_80211 -endif # MARVELL_80211 +source "drivers/net/wireless/b43/Kconfig" +source "drivers/net/wireless/b43legacy/Kconfig" + +endif # BROADCOM_80211 config CISCO_80211 bool "Cisco" @@ -232,57 +228,20 @@ config AIRO_CS endif # CISCO_80211 -config ATMEL_80211 - bool "Atmel" +menuconfig INTEL_80211 + bool "Intel" depends on WLAN_80211 ---help--- - This will enable the support for Atmel wireless drivers. - -if ATMEL_80211 - -config ATMEL - tristate "Atmel at76c50x chipset 802.11b support" - depends on (PCI || PCMCIA) && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select CRC32 - ---help--- - A driver 802.11b wireless cards based on the Atmel fast-vnet - chips. This driver supports standard Linux wireless extensions. - - Many cards based on this chipset do not have flash memory - and need their firmware loaded at start-up. If yours is - one of these, you will need to provide a firmware image - to be loaded into the card by the driver. The Atmel - firmware package can be downloaded from - - -config PCI_ATMEL - tristate "Atmel at76c506 PCI cards" - depends on ATMEL && PCI - ---help--- - Enable support for PCI and mini-PCI cards containing the - Atmel at76c506 chip. + This will enable the support for Intel wireless drivers. This + includes ipw2100, ipw2200, iwl3945, iwlagn, and iwmc3200wifi -config PCMCIA_ATMEL - tristate "Atmel at76c502/at76c504 PCMCIA cards" - depends on ATMEL && PCMCIA - select WIRELESS_EXT - select FW_LOADER - select CRC32 - ---help--- - Enable support for PCMCIA cards containing the - Atmel at76c502 and at76c504 chips. +if INTEL_80211 -config AT76C50X_USB - tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && WLAN_80211 && USB - select FW_LOADER - ---help--- - Enable support for USB Wireless devices using Atmel at76c503, - at76c505 or at76c505a chips. +source "drivers/net/wireless/ipw2x00/Kconfig" +source "drivers/net/wireless/iwlwifi/Kconfig" +source "drivers/net/wireless/iwmc3200wifi/Kconfig" -endif # ATMEL_80211 +endif # INTEL_80211 config CONEXANT_ST_80211 bool "Intersil / Conexant / STEricsson" @@ -347,50 +306,79 @@ config PRISM54 endif # CONEXANT_ST_80211 -config ZYDAS_80211 - bool "ZyDAS" +menuconfig MARVELL_80211 + bool "Marvell" depends on WLAN_80211 ---help--- - This will enable the support for ZyDAS wireless drivers. This includes - the 802.11g zd1211rw usb driver and the older 802.11b zd1201 usb driver. + This will enable the support for Marvell wireless drivers. This includes + the drivers: libertas, libertas_tf, and mwl8k. -if ZYDAS_80211 +if MARVELL_80211 +config LIBERTAS + tristate "Marvell 8xxx Libertas WLAN driver support" + depends on WLAN_80211 + select WIRELESS_EXT + select LIB80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices. -source "drivers/net/wireless/zd1211rw/Kconfig" +config LIBERTAS_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards" + depends on LIBERTAS && USB + ---help--- + A driver for Marvell Libertas 8388 USB devices. -config USB_ZD1201 - tristate "USB ZD1201 based Wireless device support" - depends on USB && WLAN_80211 - select WIRELESS_EXT +config LIBERTAS_CS + tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" + depends on LIBERTAS && PCMCIA select FW_LOADER ---help--- - Say Y if you want to use wireless LAN adapters based on the ZyDAS - ZD1201 chip. + A driver for Marvell Libertas 8385 CompactFlash devices. - This driver makes the adapter appear as a normal Ethernet interface, - typically on wlan0. +config LIBERTAS_SDIO + tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards" + depends on LIBERTAS && MMC + ---help--- + A driver for Marvell Libertas 8385/8686/8688 SDIO devices. - The zd1201 device requires external firmware to be loaded. - This can be found at http://linux-lc100020.sourceforge.net/ +config LIBERTAS_SPI + tristate "Marvell Libertas 8686 SPI 802.11b/g cards" + depends on LIBERTAS && SPI + ---help--- + A driver for Marvell Libertas 8686 SPI devices. - To compile this driver as a module, choose M here: the - module will be called zd1201. +config LIBERTAS_DEBUG + bool "Enable full debugging output in the Libertas module." + depends on LIBERTAS + ---help--- + Debugging support. -endif # ZYDAS_80211 +config LIBERTAS_THINFIRM + tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" + depends on WLAN_80211 && MAC80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices using thinfirm. -config BROADCOM_80211 - bool "Broadcom" - depends on WLAN_80211 +config LIBERTAS_THINFIRM_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" + depends on LIBERTAS_THINFIRM && USB ---help--- - This will enable the support for Broadcom wireless drivers. This - includes b43 driver, b43legacy driver and the rndis_wlan driver. + A driver for Marvell Libertas 8388 USB devices using thinfirm. -if BROADCOM_80211 +config MWL8K + tristate "Marvell 88W8xxx PCI/PCIe Wireless support" + depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + ---help--- + This driver supports Marvell TOPDOG 802.11 wireless cards. -source "drivers/net/wireless/b43/Kconfig" -source "drivers/net/wireless/b43legacy/Kconfig" + To compile this driver as a module, choose M here: the module + will be called mwl8k. If unsure, say N. -endif # BROADCOM_80211 +endif # MARVELL_80211 + +source "drivers/net/wireless/rt2x00/Kconfig" config REALTEK_80211 bool "Realtek" @@ -488,24 +476,38 @@ config RTL8187_LEDS endif # REALTEK_80211 -menuconfig INTEL_80211 - bool "Intel" +source "drivers/net/wireless/wl12xx/Kconfig + +config ZYDAS_80211 + bool "ZyDAS" depends on WLAN_80211 ---help--- - This will enable the support for Intel wireless drivers. This - includes ipw2100, ipw2200, iwl3945, iwlagn, and iwmc3200wifi + This will enable the support for ZyDAS wireless drivers. This includes + the 802.11g zd1211rw usb driver and the older 802.11b zd1201 usb driver. -if INTEL_80211 +if ZYDAS_80211 -source "drivers/net/wireless/ipw2x00/Kconfig" -source "drivers/net/wireless/iwlwifi/Kconfig" -source "drivers/net/wireless/iwmc3200wifi/Kconfig" +source "drivers/net/wireless/zd1211rw/Kconfig" -endif # INTEL_80211 +config USB_ZD1201 + tristate "USB ZD1201 based Wireless device support" + depends on USB && WLAN_80211 + select WIRELESS_EXT + select FW_LOADER + ---help--- + Say Y if you want to use wireless LAN adapters based on the ZyDAS + ZD1201 chip. -source "drivers/net/wireless/ath/Kconfig" -source "drivers/net/wireless/rt2x00/Kconfig" -source "drivers/net/wireless/wl12xx/Kconfig" + This driver makes the adapter appear as a normal Ethernet interface, + typically on wlan0. + + The zd1201 device requires external firmware to be loaded. + This can be found at http://linux-lc100020.sourceforge.net/ + + To compile this driver as a module, choose M here: the + module will be called zd1201. + +endif # ZYDAS_80211 config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4GHz wireless support"