@@ -279,224 +279,6 @@ int bcmsdh_remove(struct device *dev)
return 0;
}
-
-#else /* BCMPLATFORM_BUS */
-
-#if !defined(BCMLXSDMMC)
-/* forward declarations for PCI probe and remove functions. */
-static int __devinit bcmsdh_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent);
-static void __devexit bcmsdh_pci_remove(struct pci_dev *pdev);
-
-/**
- * pci id table
- */
-static struct pci_device_id bcmsdh_pci_devid[] __devinitdata = {
-{
- .vendor = PCI_ANY_ID,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- .driver_data = 0,
-},
-{0,}
-};
-
-MODULE_DEVICE_TABLE(pci, bcmsdh_pci_devid);
-
-/**
- * SDIO Host Controller pci driver info
- */
-static struct pci_driver bcmsdh_pci_driver = {
- .node = {},
- .name = "bcmsdh",
- .id_table = bcmsdh_pci_devid,
- .probe = bcmsdh_pci_probe,
- .remove = bcmsdh_pci_remove,
- .suspend = NULL,
- .resume = NULL,
-};
-
-extern uint sd_pci_slot; /* Force detection to a particular PCI */
- /* slot only . Allows for having multiple */
- /* WL devices at once in a PC */
- /* Only one instance of dhd will be */
- /* usable at a time */
- /* Upper word is bus number, */
- /* lower word is slot number */
- /* Default value of 0xFFFFffff turns this */
- /* off */
-module_param(sd_pci_slot, uint, 0);
-
-/**
- * Detect supported SDIO Host Controller and attach if found.
- *
- * Determine if the device described by pdev is a supported SDIO Host
- * Controller. If so, attach to it and attach to the target device.
- */
-static int __devinit
-bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- osl_t *osh = NULL;
- bcmsdh_hc_t *sdhc = NULL;
- unsigned long regs;
- bcmsdh_info_t *sdh = NULL;
- int rc;
-
- if (sd_pci_slot != 0xFFFFffff) {
- if (pdev->bus->number != (sd_pci_slot >> 16) ||
- PCI_SLOT(pdev->devfn) != (sd_pci_slot & 0xffff)) {
- SDLX_MSG(("%s: %s: bus %X, slot %X, vend %X, dev %X\n",
- __func__,
- bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
- "Found compatible SDIOHC" :
- "Probing unknown device",
- pdev->bus->number, PCI_SLOT(pdev->devfn),
- pdev->vendor, pdev->device));
- return -ENODEV;
- }
- SDLX_MSG(("%s: %s: bus %X, slot %X, vendor %X, device %X "
- "(good PCI location)\n", __func__,
- bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
- "Using compatible SDIOHC" : "WARNING, forced use "
- "of unkown device",
- pdev->bus->number, PCI_SLOT(pdev->devfn), pdev->vendor,
- pdev->device));
- }
-
- if ((pdev->vendor == VENDOR_TI)
- && ((pdev->device == PCIXX21_FLASHMEDIA_ID)
- || (pdev->device == PCIXX21_FLASHMEDIA0_ID))) {
- u32 config_reg;
-
- SDLX_MSG(("%s: Disabling TI FlashMedia Controller.\n",
- __func__));
- osh = osl_attach(pdev, PCI_BUS);
- if (!osh) {
- SDLX_MSG(("%s: osl_attach failed\n", __func__));
- goto err;
- }
-
- config_reg = OSL_PCI_READ_CONFIG(osh, 0x4c, 4);
-
- /*
- * Set MMC_SD_DIS bit in FlashMedia Controller.
- * Disbling the SD/MMC Controller in the FlashMedia Controller
- * allows the Standard SD Host Controller to take over control
- * of the SD Slot.
- */
- config_reg |= 0x02;
- OSL_PCI_WRITE_CONFIG(osh, 0x4c, 4, config_reg);
- osl_detach(osh);
- }
- /* match this pci device with what we support */
- /* we can't solely rely on this to believe it is
- our SDIO Host Controller! */
- if (!bcmsdh_chipmatch(pdev->vendor, pdev->device))
- return -ENODEV;
-
- /* this is a pci device we might support */
- SDLX_MSG(("%s: Found possible SDIO Host Controller: "
- "bus %d slot %d func %d irq %d\n", __func__,
- pdev->bus->number, PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn), pdev->irq));
-
- /* use bcmsdh_query_device() to get the vendor ID of the target device
- * so it will eventually appear in the Broadcom string on the console
- */
-
- /* allocate SDIO Host Controller state info */
- osh = osl_attach(pdev, PCI_BUS);
- if (!osh) {
- SDLX_MSG(("%s: osl_attach failed\n", __func__));
- goto err;
- }
- sdhc = kzalloc(sizeof(bcmsdh_hc_t), GFP_ATOMIC);
- if (!sdhc) {
- SDLX_MSG(("%s: out of memory\n", __func__));
- goto err;
- }
- sdhc->osh = osh;
-
- sdhc->dev = pdev;
-
- /* map to address where host can access */
- pci_set_master(pdev);
- rc = pci_enable_device(pdev);
- if (rc) {
- SDLX_MSG(("%s: Cannot enable PCI device\n", __func__));
- goto err;
- }
- sdh = bcmsdh_attach(osh, (void *)(unsigned long)pci_resource_start(pdev, 0),
- (void **)®s, pdev->irq);
- if (!sdh) {
- SDLX_MSG(("%s: bcmsdh_attach failed\n", __func__));
- goto err;
- }
-
- sdhc->sdh = sdh;
-
- /* try to attach to the target device */
- sdhc->ch = drvinfo.attach(VENDOR_BROADCOM, /* pdev->vendor, */
- bcmsdh_query_device(sdh) & 0xFFFF, 0, 0, 0, 0,
- (void *)regs, NULL, sdh);
- if (!sdhc->ch) {
- SDLX_MSG(("%s: device attach failed\n", __func__));
- goto err;
- }
-
- /* chain SDIO Host Controller info together */
- sdhc->next = sdhcinfo;
- sdhcinfo = sdhc;
-
- return 0;
-
- /* error handling */
-err:
- if (sdhc->sdh)
- bcmsdh_detach(sdhc->osh, sdhc->sdh);
- if (sdhc)
- kfree(sdhc);
- if (osh)
- osl_detach(osh);
- return -ENODEV;
-}
-
-/**
- * Detach from target devices and SDIO Host Controller
- */
-static void __devexit bcmsdh_pci_remove(struct pci_dev *pdev)
-{
- bcmsdh_hc_t *sdhc, *prev;
- osl_t *osh;
-
- /* find the SDIO Host Controller state for this
- pdev and take it out from the list */
- for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
- if (sdhc->dev == pdev) {
- if (prev)
- prev->next = sdhc->next;
- else
- sdhcinfo = NULL;
- break;
- }
- prev = sdhc;
- }
- if (!sdhc)
- return;
-
- drvinfo.detach(sdhc->ch);
-
- bcmsdh_detach(sdhc->osh, sdhc->sdh);
-
- /* release SDIO Host Controller info */
- osh = sdhc->osh;
- kfree(sdhc);
- osl_detach(osh);
-}
-#endif /* BCMLXSDMMC */
#endif /* BCMPLATFORM_BUS */
extern int sdio_function_init(void);
@@ -515,14 +297,6 @@ int bcmsdh_register(bcmsdh_driver_t *driver)
return error;
#endif /* defined(BCMPLATFORM_BUS) */
-#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
- error = pci_register_driver(&bcmsdh_pci_driver);
- if (!error)
- return 0;
-
- SDLX_MSG(("%s: pci_register_driver failed 0x%x\n", __func__, error));
-#endif /* BCMPLATFORM_BUS */
-
return error;
}
@@ -533,9 +307,6 @@ void bcmsdh_unregister(void)
#if defined(BCMLXSDMMC)
sdio_function_cleanup();
#endif /* BCMLXSDMMC */
-#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
- pci_unregister_driver(&bcmsdh_pci_driver);
-#endif /* BCMPLATFORM_BUS */
}
#if defined(OOB_INTR_ONLY)