From patchwork Thu Mar 21 22:39:39 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Solomon Peachy X-Patchwork-Id: 2317521 Return-Path: X-Original-To: patchwork-linux-wireless@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id AB36D400E6 for ; Thu, 21 Mar 2013 22:40:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932091Ab3CUWkP (ORCPT ); Thu, 21 Mar 2013 18:40:15 -0400 Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.120]:41330 "EHLO cdptpa-omtalb.mail.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753925Ab3CUWkM (ORCPT ); Thu, 21 Mar 2013 18:40:12 -0400 X-Authority-Analysis: v=2.0 cv=XL2yuHdE c=1 sm=0 a=QKCpt3RAcCy1PgeoOVilzg==:17 a=2oGSFm5vdZwA:10 a=gEGgIvNQc78A:10 a=649elMfuWG0A:10 a=svWV0_fRAAAA:8 a=QAYN-stSWGQA:10 a=THCAyMpEAAAA:8 a=AFweemanbA6uelo5a-4A:9 a=OSKtzXyDyhAA:10 a=FCIOWvmKq0cA:10 a=V3j9pjJ7hBuN_b1D:21 a=j3csh4_ebuCFJxXo:21 a=QKCpt3RAcCy1PgeoOVilzg==:117 X-Cloudmark-Score: 0 X-Authenticated-User: X-Originating-IP: 24.73.230.86 Received: from [24.73.230.86] ([24.73.230.86:46554] helo=stuffed.shaftnet.org) by cdptpa-oedge04.mail.rr.com (envelope-from ) (ecelerity 2.2.3.46 r()) with ESMTP id 25/20-25887-C4C8B415; Thu, 21 Mar 2013 22:40:12 +0000 Received: from stuffed.shaftnet.org (localhost [127.0.0.1]) by stuffed.shaftnet.org (8.14.5/8.14.5) with ESMTP id r2LMe9ir009295 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 21 Mar 2013 18:40:10 -0400 Received: (from pizza@localhost) by stuffed.shaftnet.org (8.14.5/8.14.5/Submit) id r2LMe9Cc009291; Thu, 21 Mar 2013 18:40:09 -0400 From: Solomon Peachy To: linux-wireless@vger.kernel.org Cc: Solomon Peachy Subject: [PATCH 05/15] cw1200: v5: Firmware loading Date: Thu, 21 Mar 2013 18:39:39 -0400 Message-Id: <1363905589-8350-6-git-send-email-pizza@shaftnet.org> X-Mailer: git-send-email 1.7.11.7 In-Reply-To: <1363905589-8350-1-git-send-email-pizza@shaftnet.org> References: <1363905589-8350-1-git-send-email-pizza@shaftnet.org> X-Virus-Scanned: clamav-milter 0.97.6 at stuffed.shaftnet.org X-Virus-Status: Clean X-Spam-Status: No, score=-1.0 required=4.0 tests=ALL_TRUSTED autolearn=unavailable version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on stuffed.shaftnet.org Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org Signed-off-by: Solomon Peachy --- drivers/net/wireless/cw1200/fwio.c | 517 +++++++++++++++++++++++++++++++++++++ drivers/net/wireless/cw1200/fwio.h | 39 +++ 2 files changed, 556 insertions(+) create mode 100644 drivers/net/wireless/cw1200/fwio.c create mode 100644 drivers/net/wireless/cw1200/fwio.h diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c new file mode 100644 index 0000000..8a52729 --- /dev/null +++ b/drivers/net/wireless/cw1200/fwio.c @@ -0,0 +1,517 @@ +/* + * Firmware I/O code for mac80211 ST-Ericsson CW1200 drivers + * + * Copyright (c) 2010, ST-Ericsson + * Author: Dmitry Tarnyagin + * + * Based on: + * ST-Ericsson UMAC CW1200 driver which is + * Copyright (c) 2010, ST-Ericsson + * Author: Ajitpal Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include "cw1200.h" +#include "fwio.h" +#include "hwio.h" +#include "sbus.h" +#include "bh.h" + +static int cw1200_get_hw_type(u32 config_reg_val, int *major_revision) +{ + int hw_type = -1; + u32 silicon_type = (config_reg_val >> 24) & 0x7; + u32 silicon_vers = (config_reg_val >> 31) & 0x1; + + switch (silicon_type) { + case 0x00: + *major_revision = 1; + hw_type = HIF_9000_SILICON_VERSATILE; + break; + case 0x01: + case 0x02: /* CW1x00 */ + case 0x04: /* CW1x60 */ + *major_revision = silicon_type; + if (silicon_vers) + hw_type = HIF_8601_VERSATILE; + else + hw_type = HIF_8601_SILICON; + break; + default: + break; + } + + return hw_type; +} + +static int cw1200_load_firmware_cw1200(struct cw1200_common *priv) +{ + int ret, block, num_blocks; + unsigned i; + u32 val32; + u32 put = 0, get = 0; + u8 *buf = NULL; + const char *fw_path; + const struct firmware *firmware = NULL; + + /* Macroses are local. */ +#define APB_WRITE(reg, val) \ + do { \ + ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \ + if (ret < 0) \ + goto error; \ + } while (0) +#define APB_READ(reg, val) \ + do { \ + ret = cw1200_apb_read_32(priv, CW1200_APB(reg), &(val)); \ + if (ret < 0) \ + goto error; \ + } while (0) +#define REG_WRITE(reg, val) \ + do { \ + ret = cw1200_reg_write_32(priv, (reg), (val)); \ + if (ret < 0) \ + goto error; \ + } while (0) +#define REG_READ(reg, val) \ + do { \ + ret = cw1200_reg_read_32(priv, (reg), &(val)); \ + if (ret < 0) \ + goto error; \ + } while (0) + + switch (priv->hw_revision) { + case CW1200_HW_REV_CUT10: + fw_path = FIRMWARE_CUT10; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_10; + break; + case CW1200_HW_REV_CUT11: + fw_path = FIRMWARE_CUT11; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_11; + break; + case CW1200_HW_REV_CUT20: + fw_path = FIRMWARE_CUT20; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_20; + break; + case CW1200_HW_REV_CUT22: + fw_path = FIRMWARE_CUT22; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_22; + break; + case CW1X60_HW_REV: + fw_path = FIRMWARE_CW1X60; + if (!priv->sdd_path) + priv->sdd_path = SDD_FILE_CW1X60; + break; + default: + pr_err("Invalid silicon revision %d.\n", priv->hw_revision); + return -EINVAL; + } + + /* Initialize common registers */ + APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, DOWNLOAD_ARE_YOU_HERE); + APB_WRITE(DOWNLOAD_PUT_REG, 0); + APB_WRITE(DOWNLOAD_GET_REG, 0); + APB_WRITE(DOWNLOAD_STATUS_REG, DOWNLOAD_PENDING); + APB_WRITE(DOWNLOAD_FLAGS_REG, 0); + + /* Write the NOP Instruction */ + REG_WRITE(ST90TDS_SRAM_BASE_ADDR_REG_ID, 0xFFF20000); + REG_WRITE(ST90TDS_AHB_DPORT_REG_ID, 0xEAFFFFFE); + + /* Release CPU from RESET */ + REG_READ(ST90TDS_CONFIG_REG_ID, val32); + val32 &= ~ST90TDS_CONFIG_CPU_RESET_BIT; + REG_WRITE(ST90TDS_CONFIG_REG_ID, val32); + + /* Enable Clock */ + val32 &= ~ST90TDS_CONFIG_CPU_CLK_DIS_BIT; + REG_WRITE(ST90TDS_CONFIG_REG_ID, val32); + +#ifdef CONFIG_CW1200_ETF + if (etf_mode) + fw_path = etf_firmware; +#endif + + /* Load a firmware file */ + ret = request_firmware(&firmware, fw_path, priv->pdev); + if (ret) { + pr_err("Can't load firmware file %s.\n", fw_path); + goto error; + } + + buf = kmalloc(DOWNLOAD_BLOCK_SIZE, GFP_KERNEL | GFP_DMA); + if (!buf) { + pr_err("Can't allocate firmware load buffer.\n"); + ret = -ENOMEM; + goto error; + } + + /* Check if the bootloader is ready */ + for (i = 0; i < 100; i += 1 + i / 2) { + APB_READ(DOWNLOAD_IMAGE_SIZE_REG, val32); + if (val32 == DOWNLOAD_I_AM_HERE) + break; + mdelay(i); + } /* End of for loop */ + + if (val32 != DOWNLOAD_I_AM_HERE) { + pr_err("Bootloader is not ready.\n"); + ret = -ETIMEDOUT; + goto error; + } + + /* Calculcate number of download blocks */ + num_blocks = (firmware->size - 1) / DOWNLOAD_BLOCK_SIZE + 1; + + /* Updating the length in Download Ctrl Area */ + val32 = firmware->size; /* Explicit cast from size_t to u32 */ + APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, val32); + + /* Firmware downloading loop */ + for (block = 0; block < num_blocks; block++) { + size_t tx_size; + size_t block_size; + + /* check the download status */ + APB_READ(DOWNLOAD_STATUS_REG, val32); + if (val32 != DOWNLOAD_PENDING) { + pr_err("Bootloader reported error %d.\n", val32); + ret = -EIO; + goto error; + } + + /* loop until put - get <= 24K */ + for (i = 0; i < 100; i++) { + APB_READ(DOWNLOAD_GET_REG, get); + if ((put - get) <= + (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) + break; + mdelay(i); + } + + if ((put - get) > (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) { + pr_err("Timeout waiting for FIFO.\n"); + ret = -ETIMEDOUT; + goto error; + } + + /* calculate the block size */ + tx_size = block_size = min((size_t)(firmware->size - put), + (size_t)DOWNLOAD_BLOCK_SIZE); + + memcpy(buf, &firmware->data[put], block_size); + if (block_size < DOWNLOAD_BLOCK_SIZE) { + memset(&buf[block_size], 0, + DOWNLOAD_BLOCK_SIZE - block_size); + tx_size = DOWNLOAD_BLOCK_SIZE; + } + + /* send the block to sram */ + ret = cw1200_apb_write(priv, + CW1200_APB(DOWNLOAD_FIFO_OFFSET + + (put & (DOWNLOAD_FIFO_SIZE - 1))), + buf, tx_size); + if (ret < 0) { + pr_err("Can't write firmware block @ %d!\n", + put & (DOWNLOAD_FIFO_SIZE - 1)); + goto error; + } + + /* update the put register */ + put += block_size; + APB_WRITE(DOWNLOAD_PUT_REG, put); + } /* End of firmware download loop */ + + /* Wait for the download completion */ + for (i = 0; i < 300; i += 1 + i / 2) { + APB_READ(DOWNLOAD_STATUS_REG, val32); + if (val32 != DOWNLOAD_PENDING) + break; + mdelay(i); + } + if (val32 != DOWNLOAD_SUCCESS) { + pr_err("Wait for download completion failed: 0x%.8X\n", val32); + ret = -ETIMEDOUT; + goto error; + } else { + pr_info("Firmware download completed.\n"); + ret = 0; + } + +error: + kfree(buf); + if (firmware) + release_firmware(firmware); + return ret; + +#undef APB_WRITE +#undef APB_READ +#undef REG_WRITE +#undef REG_READ +} + + +static int config_reg_read(struct cw1200_common *priv, u32 *val) +{ + switch (priv->hw_type) { + case HIF_9000_SILICON_VERSATILE: { + u16 val16; + int ret = cw1200_reg_read_16(priv, ST90TDS_CONFIG_REG_ID, &val16); + if (ret < 0) + return ret; + *val = val16; + return 0; + } + case HIF_8601_VERSATILE: + case HIF_8601_SILICON: + default: + cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, val); + break; + } + return 0; +} + +static int config_reg_write(struct cw1200_common *priv, u32 val) +{ + switch (priv->hw_type) { + case HIF_9000_SILICON_VERSATILE: + return cw1200_reg_write_16(priv, ST90TDS_CONFIG_REG_ID, (u16)val); + case HIF_8601_VERSATILE: + case HIF_8601_SILICON: + default: + return cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, val); + break; + } + return 0; +} + +int cw1200_load_firmware(struct cw1200_common *priv) +{ + int ret; + int i; + u32 val32; + u16 val16; + int major_revision = -1; + + /* Read CONFIG Register */ + ret = cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); + if (ret < 0) { + pr_err("Can't read config register.\n"); + goto out; + } + + if (val32 == 0 || val32 == 0xffffffff) { + pr_err("Bad config register value (0x%08x)\n", val32); + ret = -EIO; + goto out; + } + + priv->hw_type = cw1200_get_hw_type(val32, &major_revision); + if (priv->hw_type < 0) { + pr_err("Can't deduce hardware type.\n"); + ret = -ENOTSUPP; + goto out; + } + + /* Set DPLL Reg value, and read back to confirm writes work */ + ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID, cw1200_dpll_from_clk(priv->hw_refclk)); + if (ret < 0) { + pr_err("Can't write DPLL register.\n"); + goto out; + } + + msleep(20); + + ret = cw1200_reg_read_32(priv, + ST90TDS_TSET_GEN_R_W_REG_ID, &val32); + if (ret < 0) { + pr_err("Can't read DPLL register.\n"); + goto out; + } + + if (val32 != cw1200_dpll_from_clk(priv->hw_refclk)) { + pr_err("Unable to initialise DPLL register. Wrote 0x%.8X, Read 0x%.8X.\n", + cw1200_dpll_from_clk(priv->hw_refclk), val32); + ret = -EIO; + goto out; + } + + /* Set wakeup bit in device */ + ret = cw1200_reg_read_16(priv, ST90TDS_CONTROL_REG_ID, &val16); + if (ret < 0) { + pr_err("set_wakeup: can't read control register.\n"); + goto out; + } + + ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, + val16 | ST90TDS_CONT_WUP_BIT); + if (ret < 0) { + pr_err("set_wakeup: can't write control register.\n"); + goto out; + } + + /* Wait for wakeup */ + for (i = 0; i < 300; i += (1 + i / 2)) { + ret = cw1200_reg_read_16(priv, + ST90TDS_CONTROL_REG_ID, &val16); + if (ret < 0) { + pr_err("wait_for_wakeup: can't read control register.\n"); + goto out; + } + + if (val16 & ST90TDS_CONT_RDY_BIT) + break; + + msleep(i); + } + + if ((val16 & ST90TDS_CONT_RDY_BIT) == 0) { + pr_err("wait_for_wakeup: device is not responding.\n"); + ret = -ETIMEDOUT; + goto out; + } + + switch (major_revision) { + case 1: + /* CW1200 Hardware detection logic : Check for CUT1.1 */ + ret = cw1200_ahb_read_32(priv, CW1200_CUT_ID_ADDR, &val32); + if (ret) { + pr_err("HW detection: can't read CUT ID.\n"); + goto out; + } + + switch (val32) { + case CW1200_CUT_11_ID_STR: + pr_info("CW1x00 Cut 1.1 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT11; + break; + default: + pr_info("CW1x00 Cut 1.0 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT10; + break; + } + + /* According to ST-E, CUT<2.0 has busted BA TID0-3. + Just disable it entirely... */ + priv->ba_rx_tid_mask = 0; + priv->ba_tx_tid_mask = 0; + break; + case 2: { + u32 ar1, ar2, ar3; + ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR, &ar1); + if (ret) { + pr_err("(1) HW detection: can't read CUT ID\n"); + goto out; + } + ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 4, &ar2); + if (ret) { + pr_err("(2) HW detection: can't read CUT ID.\n"); + goto out; + } + + ret = cw1200_ahb_read_32(priv, CW1200_CUT2_ID_ADDR + 8, &ar3); + if (ret) { + pr_err("(3) HW detection: can't read CUT ID.\n"); + goto out; + } + + if (ar1 == CW1200_CUT_22_ID_STR1 && + ar2 == CW1200_CUT_22_ID_STR2 && + ar3 == CW1200_CUT_22_ID_STR3) { + pr_info("CW1x00 Cut 2.2 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT22; + } else { + pr_info("CW1x00 Cut 2.0 silicon detected.\n"); + priv->hw_revision = CW1200_HW_REV_CUT20; + } + break; + } + case 4: + pr_info("CW1x60 silicon detected.\n"); + priv->hw_revision = CW1X60_HW_REV; + break; + default: + pr_err("Unsupported silicon major revision %d.\n", + major_revision); + ret = -ENOTSUPP; + goto out; + } + + /* Checking for access mode */ + ret = config_reg_read(priv, &val32); + if (ret < 0) { + pr_err("Can't read config register.\n"); + goto out; + } + + if (!(val32 & ST90TDS_CONFIG_ACCESS_MODE_BIT)) { + pr_err("Device is already in QUEUE mode!\n"); + ret = -EINVAL; + goto out; + } + + switch (priv->hw_type) { + case HIF_8601_SILICON: + if (priv->hw_revision == CW1X60_HW_REV) { + pr_err("Can't handle CW1160/1260 firmware load yet.\n"); + ret = -ENOTSUPP; + goto out; + } + ret = cw1200_load_firmware_cw1200(priv); + break; + default: + pr_err("Can't perform firmware load for hw type %d.\n", priv->hw_type); + ret = -ENOTSUPP; + goto out; + } + if (ret < 0) { + pr_err("Firmware load error.\n"); + goto out; + } + + /* Enable interrupt signalling */ + priv->sbus_ops->lock(priv->sbus_priv); + ret = __cw1200_irq_enable(priv, 1); + priv->sbus_ops->unlock(priv->sbus_priv); + if (ret < 0) + goto unsubscribe; + + /* Configure device for MESSSAGE MODE */ + ret = config_reg_read(priv, &val32); + if (ret < 0) { + pr_err("Can't read config register.\n"); + goto unsubscribe; + } + ret = config_reg_write(priv, val32 & ~ST90TDS_CONFIG_ACCESS_MODE_BIT); + if (ret < 0) { + pr_err("Can't write config register.\n"); + goto unsubscribe; + } + + /* Unless we read the CONFIG Register we are + * not able to get an interrupt */ + mdelay(10); + config_reg_read(priv, &val32); + +out: + return ret; + +unsubscribe: + /* Disable interrupt signalling */ + priv->sbus_ops->lock(priv->sbus_priv); + ret = __cw1200_irq_enable(priv, 0); + priv->sbus_ops->unlock(priv->sbus_priv); + return ret; +} diff --git a/drivers/net/wireless/cw1200/fwio.h b/drivers/net/wireless/cw1200/fwio.h new file mode 100644 index 0000000..fbd736f --- /dev/null +++ b/drivers/net/wireless/cw1200/fwio.h @@ -0,0 +1,39 @@ +/* + * Firmware API for mac80211 ST-Ericsson CW1200 drivers + * + * Copyright (c) 2010, ST-Ericsson + * Author: Dmitry Tarnyagin + * + * Based on: + * ST-Ericsson UMAC CW1200 driver which is + * Copyright (c) 2010, ST-Ericsson + * Author: Ajitpal Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef FWIO_H_INCLUDED +#define FWIO_H_INCLUDED + +#define BOOTLOADER_CW1X60 "boot_cw1x60.bin" +#define FIRMWARE_CW1X60 "wsm_cw1x60.bin" +#define FIRMWARE_CUT22 "wsm_22.bin" +#define FIRMWARE_CUT20 "wsm_20.bin" +#define FIRMWARE_CUT11 "wsm_11.bin" +#define FIRMWARE_CUT10 "wsm_10.bin" +#define SDD_FILE_CW1X60 "sdd_cw1x60.bin" +#define SDD_FILE_22 "sdd_22.bin" +#define SDD_FILE_20 "sdd_20.bin" +#define SDD_FILE_11 "sdd_11.bin" +#define SDD_FILE_10 "sdd_10.bin" + +int cw1200_load_firmware(struct cw1200_common *priv); + +/* SDD definitions */ +#define SDD_PTA_CFG_ELT_ID 0xEB +#define SDD_REFERENCE_FREQUENCY_ELT_ID 0xc5 +u32 cw1200_dpll_from_clk(u16 clk); + +#endif