From patchwork Sun Jun 2 15:35:32 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Solomon Peachy X-Patchwork-Id: 2649811 Return-Path: X-Original-To: patchwork-linux-wireless@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id 94C553FC23 for ; Sun, 2 Jun 2013 15:35:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753008Ab3FBPfk (ORCPT ); Sun, 2 Jun 2013 11:35:40 -0400 Received: from 162-17-110-37-static.hfc.comcastbusiness.net ([162.17.110.37]:46658 "EHLO stuffed.shaftnet.org" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1752632Ab3FBPfj (ORCPT ); Sun, 2 Jun 2013 11:35:39 -0400 Received: from stuffed.shaftnet.org (localhost [127.0.0.1]) by stuffed.shaftnet.org (8.14.5/8.14.5) with ESMTP id r52FZaKC018919 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sun, 2 Jun 2013 11:35:36 -0400 Received: (from pizza@localhost) by stuffed.shaftnet.org (8.14.5/8.14.5/Submit) id r52FZad6018915; Sun, 2 Jun 2013 11:35:36 -0400 From: Solomon Peachy To: linux-wireless@vger.kernel.org Cc: Solomon Peachy Subject: [PATCH -next 2/2] cw1200: rename the cw1200 platform definition header Date: Sun, 2 Jun 2013 11:35:32 -0400 Message-Id: <1370187332-18813-2-git-send-email-pizza@shaftnet.org> X-Mailer: git-send-email 1.7.11.7 In-Reply-To: <1370187332-18813-1-git-send-email-pizza@shaftnet.org> References: <1370187332-18813-1-git-send-email-pizza@shaftnet.org> X-Virus-Scanned: clamav-milter 0.97.7 at stuffed.shaftnet.org X-Virus-Status: Clean X-Spam-Status: No, score=-1.0 required=4.0 tests=ALL_TRUSTED autolearn=unavailable version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on stuffed.shaftnet.org Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org My previous patch just moved the file, but it also needed to be renamed to conform to proper conventions. Signed-off-by: Solomon Peachy --- drivers/net/wireless/cw1200/cw1200_sdio.c | 2 +- drivers/net/wireless/cw1200/cw1200_spi.c | 2 +- include/linux/platform_data/cw1200_platform.h | 81 --------------------------- include/linux/platform_data/net-cw1200.h | 81 +++++++++++++++++++++++++++ 4 files changed, 83 insertions(+), 83 deletions(-) delete mode 100644 include/linux/platform_data/cw1200_platform.h create mode 100644 include/linux/platform_data/net-cw1200.h diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c index 913a3eb..808257e 100644 --- a/drivers/net/wireless/cw1200/cw1200_sdio.c +++ b/drivers/net/wireless/cw1200/cw1200_sdio.c @@ -21,7 +21,7 @@ #include "cw1200.h" #include "hwbus.h" -#include +#include #include "hwio.h" MODULE_AUTHOR("Dmitry Tarnyagin "); diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index 5eacf9e..61406e7 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -26,7 +26,7 @@ #include "cw1200.h" #include "hwbus.h" -#include +#include #include "hwio.h" MODULE_AUTHOR("Solomon Peachy "); diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h deleted file mode 100644 index c6fbc3c..0000000 --- a/include/linux/platform_data/cw1200_platform.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Dmitry Tarnyagin - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef CW1200_PLAT_H_INCLUDED -#define CW1200_PLAT_H_INCLUDED - -struct cw1200_platform_data_spi { - u8 spi_bits_per_word; /* REQUIRED */ - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - -struct cw1200_platform_data_sdio { - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int irq; /* IRQ line or 0 to use SDIO IRQ */ - int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - - -/* An example of SPI support in your board setup file: - - static struct cw1200_platform_data_spi cw1200_platform_data = { - .ref_clk = 38400, - .spi_bits_per_word = 16, - .reset = GPIO_RF_RESET, - .powerup = GPIO_RF_POWERUP, - .macaddr = wifi_mac_addr, - .sdd_file = "sdd_sagrad_1091_1098.bin", - }; - static struct spi_board_info myboard_spi_devices[] __initdata = { - { - .modalias = "cw1200_wlan_spi", - .max_speed_hz = 52000000, - .bus_num = 0, - .irq = WIFI_IRQ, - .platform_data = &cw1200_platform_data, - .chip_select = 0, - }, - }; - - */ - -/* An example of SDIO support in your board setup file: - - static struct cw1200_platform_data_sdio my_cw1200_platform_data = { - .ref_clk = 38400, - .have_5ghz = false, - .sdd_file = "sdd_myplatform.bin", - }; - cw1200_sdio_set_platform_data(&my_cw1200_platform_data); - - */ - -void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); - -#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h new file mode 100644 index 0000000..c6fbc3c --- /dev/null +++ b/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */