diff mbox

[15/20] rtl8180: add ERP configuration for rtl8187se

Message ID 1395864183-4988-1-git-send-email-andrea.merello@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Andrea Merello March 26, 2014, 8:03 p.m. UTC 
This patch adds ERP configuration support for rtl8187se to the
existing ERP configuration function.
It needs a different register offset and it must not apply
rtl8185 workaround.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 8061852..6f9da01 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1336,13 +1336,17 @@  static void rtl8180_conf_erp(struct ieee80211_hw *dev,
 	/* from reference code. set ack timeout reg = eifs reg */
 	rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
 
-	/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
-	 * the HW still wait for DIFS.
-	 * HW uses 4uS units for EIFS.
-	 */
-	hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+		rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs);
+	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+		/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
+		 * the HW still wait for DIFS.
+		 * HW uses 4uS units for EIFS.
+		 */
+		hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
 
-	rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+		rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+	}
 }
 
 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,