diff mbox

[05/12] iwlwifi: increase DEFAULT_MAX_TX_POWER

Message ID 1410195377-10075-5-git-send-email-egrumbach@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Emmanuel Grumbach Sept. 8, 2014, 4:56 p.m. UTC 
From: Eliad Peller <eliad@wizery.com>

The chip is able to transmit up to 22dBm, so set
the constant appropriately.

CC: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-config.h    | 2 ++
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 4 +---
 2 files changed, 3 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 8da596d..942c99b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -120,6 +120,8 @@  enum iwl_led_mode {
 #define IWL_LONG_WD_TIMEOUT	10000
 #define IWL_MAX_WD_TIMEOUT	120000
 
+#define IWL_DEFAULT_MAX_TX_POWER 22
+
 /* Antenna presence definitions */
 #define	ANT_NONE	0x0
 #define	ANT_A		BIT(0)
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 018af29..354255f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -146,8 +146,6 @@  static const u8 iwl_nvm_channels_family_8000[] = {
 #define LAST_2GHZ_HT_PLUS		9
 #define LAST_5GHZ_HT			161
 
-#define DEFAULT_MAX_TX_POWER 16
-
 /* rate data (static) */
 static struct ieee80211_rate iwl_cfg80211_rates[] = {
 	{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
@@ -295,7 +293,7 @@  static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		 * Default value - highest tx power value.  max_power
 		 * is not used in mvm, and is used for backwards compatibility
 		 */
-		channel->max_power = DEFAULT_MAX_TX_POWER;
+		channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
 		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
 		IWL_DEBUG_EEPROM(dev,
 				 "Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",