diff mbox

[v3] cfg80211: Allow GO concurrent relaxation after BSS disconnection

Message ID 1430142736-24032-1-git-send-email-ilan.peer@intel.com (mailing list archive)
State Accepted
Delegated to: Johannes Berg
Headers show

Commit Message

Peer, Ilan April 27, 2015, 1:52 p.m. UTC
From: Avraham Stern <avraham.stern@intel.com>

If a P2P GO was allowed on a channel because of the GO concurrent
relaxation, i.e., another station interface was associated to an AP on
the same channel or the same UNII band, and the station interface
disconnected from the AP, allow the following use cases unless the
channel is marked as indoor only and the device is not operating in an
indoor environment:

1. Allow the P2P GO to stay on its current channel. The rationale behind
   this is that if the channel or UNII band were allowed by the AP they
   could still be used to continue the P2P GO operation, and avoid connection
   breakage.
2. Allow another P2P GO to start on the same channel or another channel
   that is in the same UNII band as the previous instantiated P2P GO.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 net/wireless/chan.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

Comments

Johannes Berg May 6, 2015, 12:48 p.m. UTC | #1
On Mon, 2015-04-27 at 16:52 +0300, Ilan Peer wrote:
> From: Avraham Stern <avraham.stern@intel.com>
> 
> If a P2P GO was allowed on a channel because of the GO concurrent
> relaxation, i.e., another station interface was associated to an AP on
> the same channel or the same UNII band, and the station interface
> disconnected from the AP, allow the following use cases unless the
> channel is marked as indoor only and the device is not operating in an
> indoor environment:
> 
> 1. Allow the P2P GO to stay on its current channel. The rationale behind
>    this is that if the channel or UNII band were allowed by the AP they
>    could still be used to continue the P2P GO operation, and avoid connection
>    breakage.
> 2. Allow another P2P GO to start on the same channel or another channel
>    that is in the same UNII band as the previous instantiated P2P GO.

Applied.

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 7aaf741..5bcffdb 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -709,7 +709,7 @@  EXPORT_SYMBOL(cfg80211_chandef_usable);
 static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
 					struct ieee80211_channel *chan)
 {
-	struct wireless_dev *wdev_iter;
+	struct wireless_dev *wdev;
 	struct wiphy *wiphy = wiphy_idx_to_wiphy(rdev->wiphy_idx);
 
 	ASSERT_RTNL();
@@ -732,18 +732,27 @@  static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
 	 * and thus fail the GO instantiation, consider only the interfaces of
 	 * the current registered device.
 	 */
-	list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
+	list_for_each_entry(wdev, &rdev->wdev_list, list) {
 		struct ieee80211_channel *other_chan = NULL;
 		int r1, r2;
 
-		if (wdev_iter->iftype != NL80211_IFTYPE_STATION ||
-		    !netif_running(wdev_iter->netdev))
-			continue;
-
-		wdev_lock(wdev_iter);
-		if (wdev_iter->current_bss)
-			other_chan = wdev_iter->current_bss->pub.channel;
-		wdev_unlock(wdev_iter);
+		wdev_lock(wdev);
+		if (wdev->iftype == NL80211_IFTYPE_STATION &&
+		    wdev->current_bss)
+			other_chan = wdev->current_bss->pub.channel;
+
+		/*
+		 * If a GO already operates on the same GO_CONCURRENT channel,
+		 * this one (maybe the same one) can beacon as well. We allow
+		 * the operation even if the station we relied on with
+		 * GO_CONCURRENT is disconnected now. But then we must make sure
+		 * we're not outdoor on an indoor-only channel.
+		 */
+		if (wdev->iftype == NL80211_IFTYPE_P2P_GO &&
+		    wdev->beacon_interval &&
+		    !(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
+			other_chan = wdev->chandef.chan;
+		wdev_unlock(wdev);
 
 		if (!other_chan)
 			continue;