diff mbox

[19/21] staging: wilc1000: remove warnings on the multiple blank lines uses

Message ID 1438073261-28315-20-git-send-email-tony.cho@atmel.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Tony Cho July 28, 2015, 8:47 a.m. UTC
From: "Kim, Leo" <leo.kim@atmel.com>

This patch removes the warnings reported by checkpatch.pl for using
multiple blank lines.

Signed-off-by: Kim, Leo <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
---
 drivers/staging/wilc1000/linux_wlan.c | 69 -----------------------------------
 1 file changed, 69 deletions(-)
diff mbox

Patch

diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index a4589b7..d012af5 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -102,7 +102,6 @@  static int linux_wlan_device_detection(int on_off)
 	return 0;
 }
 
-
 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
 static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr);
 
@@ -115,7 +114,6 @@  static struct notifier_block g_dev_notifier = {
 		if (g_linux_wlan->oup.wlan_cleanup != NULL) \
 			g_linux_wlan->oup.wlan_cleanup(); }
 
-
 #ifndef STA_FIRMWARE
 #define STA_FIRMWARE	"wifi_firmware.bin"
 #endif
@@ -128,15 +126,12 @@  static struct notifier_block g_dev_notifier = {
 #define P2P_CONCURRENCY_FIRMWARE	"wifi_firmware_p2p_concurrency.bin"
 #endif
 
-
-
 typedef struct android_wifi_priv_cmd {
 	char *buf;
 	int used_len;
 	int total_len;
 } android_wifi_priv_cmd;
 
-
 #define IRQ_WAIT	1
 #define IRQ_NO_WAIT	0
 /*
@@ -157,7 +152,6 @@  void linux_wlan_unlock(void *vp);
 extern void WILC_WFI_monitor_rx(uint8_t *buff, uint32_t size);
 extern void WILC_WFI_p2p_rx(struct net_device *dev, uint8_t *buff, uint32_t size);
 
-
 static void *internal_alloc(uint32_t size, uint32_t flag);
 static void linux_wlan_tx_complete(void *priv, int status);
 void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset);
@@ -169,8 +163,6 @@  static struct net_device_stats *mac_stats(struct net_device *dev);
 static int  mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd);
 static void wilc_set_multicast_list(struct net_device *dev);
 
-
-
 /*
  * for now - in frmw_to_linux there should be private data to be passed to it
  * and this data should be pointer to net device
@@ -199,8 +191,6 @@  volatile int WatchDogdebuggerCounter;
 char DebugBuffer[DEGUG_BUFFER_LENGTH + 20] = {0};
 static char *ps8current = DebugBuffer;
 
-
-
 void printk_later(const char *format, ...)
 {
 	va_list args;
@@ -212,7 +202,6 @@  void printk_later(const char *format, ...)
 
 }
 
-
 void dump_logs()
 {
 	if (DebugBuffer[0]) {
@@ -244,11 +233,8 @@  static int DebuggingThreadTask(void *vp)
 		WatchDogdebuggerCounter = 0;
 	}
 }
-
-
 #endif
 
-
 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
 static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr)
 {
@@ -296,7 +282,6 @@  static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
 
 		PRINT_INFO(GENERIC_DBG, "\n ============== IP Address Obtained ===============\n\n");
 
-
 		/*If we are in station mode or client mode*/
 		if (nic->iftype == STATION_MODE || nic->iftype == CLIENT_MODE) {
 			pstrWFIDrv->IFC_UP = 1;
@@ -305,8 +290,6 @@  static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
 			PRINT_D(GENERIC_DBG, "IP obtained , enable scan\n");
 		}
 
-
-
 		if (bEnablePS)
 			host_int_set_power_mgmt((WILC_WFIDrvHandle)pstrWFIDrv, 1, 0);
 
@@ -332,7 +315,6 @@  static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
 
 		resolve_disconnect_aberration(pstrWFIDrv);
 
-
 		PRINT_D(GENERIC_DBG, "[%s] Down IP\n", dev_iface->ifa_label);
 
 		pIP_Add_buff = null_ip;
@@ -385,8 +367,6 @@  void linux_wlan_disable_irq(int wait)
 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
 static irqreturn_t isr_uh_routine(int irq, void *user_data)
 {
-
-
 	int_rcvdU++;
 #if (RX_BH_TYPE != RX_BH_THREADED_IRQ)
 	linux_wlan_disable_irq(IRQ_NO_WAIT);
@@ -438,9 +418,6 @@  static void isr_bh_routine(struct work_struct *work)
 	#else
 		return;
 	#endif
-
-
-
 	}
 
 	int_rcvdB++;
@@ -451,7 +428,6 @@  static void isr_bh_routine(struct work_struct *work)
 		PRINT_ER("wlan_handle_rx_isr() hasn't been initialized\n");
 	}
 
-
 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
 	return IRQ_HANDLED;
 #endif
@@ -485,7 +461,6 @@  static int isr_bh_routine(void *vp)
 }
 #endif
 
-
 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
 static int init_irq(linux_wlan_t *p_nic)
 {
@@ -516,7 +491,6 @@  static int init_irq(linux_wlan_t *p_nic)
 		PRINT_ER("could not obtain gpio for WILC_INTR\n");
 	}
 
-
 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
 	if ((ret != -1) && (request_threaded_irq(nic->dev_irq_num, isr_uh_routine, isr_bh_routine,
 						  IRQF_TRIGGER_LOW | IRQF_ONESHOT,               /*Without IRQF_ONESHOT the uh will remain kicked in and dont gave a chance to bh*/
@@ -552,7 +526,6 @@  static void deinit_irq(linux_wlan_t *nic)
 #endif
 }
 
-
 /*
  *      OS functions
  */
@@ -599,7 +572,6 @@  void linux_wlan_free(void *vp)
 	}
 }
 
-
 static void *internal_alloc(uint32_t size, uint32_t flag)
 {
 	char *pntr = NULL;
@@ -608,7 +580,6 @@  static void *internal_alloc(uint32_t size, uint32_t flag)
 	return (void *)pntr;
 }
 
-
 static void linux_wlan_init_lock(char *lockName, void *plock, int count)
 {
 	sema_init((struct semaphore *)plock, count);
@@ -654,7 +625,6 @@  void linux_wlan_unlock(void *vp)
 	}
 }
 
-
 static void linux_wlan_init_mutex(char *lockName, void *plock, int count)
 {
 	mutex_init((struct mutex *)plock);
@@ -700,7 +670,6 @@  static void linux_wlan_unlock_mutex(void *vp)
 	}
 }
 
-
 /*Added by Amr - BugID_4720*/
 static void linux_wlan_init_spin_lock(char *lockName, void *plock, int count)
 {
@@ -938,7 +907,6 @@  int linux_wlan_get_firmware(perInterface_wlan_t *p_nic)
 	const struct firmware *wilc_firmware;
 	char *firmware;
 
-
 	if (nic->iftype == AP_MODE)
 		firmware = AP_FIRMWARE;
 	else if (nic->iftype == STATION_MODE)
@@ -950,8 +918,6 @@  int linux_wlan_get_firmware(perInterface_wlan_t *p_nic)
 		firmware = P2P_CONCURRENCY_FIRMWARE;
 	}
 
-
-
 	if (nic == NULL) {
 		PRINT_ER("NIC is NULL\n");
 		goto _fail_;
@@ -962,7 +928,6 @@  int linux_wlan_get_firmware(perInterface_wlan_t *p_nic)
 		goto _fail_;
 	}
 
-
 	/*	the firmare should be located in /lib/firmware in
 	 *      root file system with the name specified above */
 
@@ -1061,7 +1026,6 @@  _FAIL_:
 	return ret;
 }
 
-
 /* startup configuration - could be changed later using iconfig*/
 static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_nic)
 {
@@ -1087,7 +1051,6 @@  static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_n
 	PRINT_D(INIT_DBG, "MAC address is : %02x-%02x-%02x-%02x-%02x-%02x\n", mac_add[0], mac_add[1], mac_add[2], mac_add[3], mac_add[4], mac_add[5]);
 	wilc_get_chipid(0);
 
-
 	if (g_linux_wlan->oup.wlan_cfg_set == NULL) {
 		PRINT_D(INIT_DBG, "Null p[ointer\n");
 		goto _fail_;
@@ -1107,7 +1070,6 @@  static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_n
 	if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BSS_TYPE, c_val, 1, 0, 0))
 		goto _fail_;
 
-
 	/* c_val[0] = RATE_AUTO; / * bug 4275: Enable autorate and limit it to 24Mbps * / */
 	c_val[0] = RATE_AUTO;
 	if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0))
@@ -1342,7 +1304,6 @@  _fail_:
 	return -1;
 }
 
-
 /**************************/
 void wilc1000_wlan_deinit(linux_wlan_t *nic)
 {
@@ -1376,7 +1337,6 @@  void wilc1000_wlan_deinit(linux_wlan_t *nic)
 		  #endif
 		#endif
 
-
 		/* not sure if the following unlocks are needed or not*/
 		if (&g_linux_wlan->rxq_event != NULL)
 			linux_wlan_unlock(&g_linux_wlan->rxq_event);
@@ -1384,7 +1344,6 @@  void wilc1000_wlan_deinit(linux_wlan_t *nic)
 		if (&g_linux_wlan->txq_event != NULL)
 			linux_wlan_unlock(&g_linux_wlan->txq_event);
 
-
 	#if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
 		/*Removing the work struct from the linux kernel workqueue*/
 		if (&g_linux_wlan->rx_work_queue != NULL)
@@ -1401,7 +1360,6 @@  void wilc1000_wlan_deinit(linux_wlan_t *nic)
 		PRINT_D(INIT_DBG, "Deinitializing IRQ\n");
 		deinit_irq(g_linux_wlan);
 
-
 		if (&g_linux_wlan->oup != NULL) {
 			if (g_linux_wlan->oup.wlan_stop != NULL)
 				g_linux_wlan->oup.wlan_stop();
@@ -1662,17 +1620,14 @@  static void wlan_deinitialize_threads(linux_wlan_t *nic)
 	if (&g_linux_wlan->rxq_event != NULL)
 		linux_wlan_unlock(&g_linux_wlan->rxq_event);
 
-
 	if (g_linux_wlan->rxq_thread != NULL) {
 		kthread_stop(g_linux_wlan->rxq_thread);
 		g_linux_wlan->rxq_thread = NULL;
 	}
 
-
 	if (&g_linux_wlan->txq_event != NULL)
 		linux_wlan_unlock(&g_linux_wlan->txq_event);
 
-
 	if (g_linux_wlan->txq_thread != NULL) {
 		kthread_stop(g_linux_wlan->txq_thread);
 		g_linux_wlan->txq_thread = NULL;
@@ -1872,7 +1827,6 @@  int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
 		/*Save the oup structre into global pointer*/
 		gpstrWlanOps = &g_linux_wlan->oup;
 
-
 		ret = wlan_initialize_threads(nic);
 		if (ret < 0) {
 			PRINT_ER("Initializing Threads FAILED\n");
@@ -1910,7 +1864,6 @@  int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
 			goto _fail_irq_enable_;
 		}
 
-
 		/*Download firmware*/
 		ret = linux_wlan_firmware_download(g_linux_wlan);
 		if (ret < 0) {
@@ -1950,7 +1903,6 @@  int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
 		g_linux_wlan->wilc1000_initialized = 1;
 		return 0; /*success*/
 
-
 _fail_fw_start_:
 		if (&g_linux_wlan->oup != NULL) {
 			if (g_linux_wlan->oup.wlan_stop != NULL)
@@ -1979,7 +1931,6 @@  _fail_locks_:
 	return ret;
 }
 
-
 /*
  *      - this function will be called automatically by OS when module inserted.
  */
@@ -2011,7 +1962,6 @@  int mac_init_fn(struct net_device *ndev)
 }
 #endif
 
-
 void    WILC_WFI_frame_register(struct wiphy *wiphy, struct net_device *dev,
 				u16 frame_type, bool reg);
 
@@ -2075,7 +2025,6 @@  int mac_open(struct net_device *ndev)
 		goto _err_;
 	}
 
-
 	WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev,
 				nic->g_struct_frame_reg[0].frame_type, nic->g_struct_frame_reg[0].reg);
 	WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev,
@@ -2114,7 +2063,6 @@  struct net_device_stats *mac_stats(struct net_device *dev)
 {
 	perInterface_wlan_t *nic = netdev_priv(dev);
 
-
 	return &nic->netstats;
 }
 
@@ -2129,7 +2077,6 @@  static void wilc_set_multicast_list(struct net_device *dev)
 	priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
 	pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
 
-
 	if (!dev)
 		return;
 
@@ -2250,7 +2197,6 @@  int mac_xmit(struct sk_buff *skb, struct net_device *ndev)
 	QueueCount = WILC_Xmit_data((void *)tx_data, HOST_TO_WLAN);
 	#endif /* WILC_FULLY_HOSTING_AP */
 
-
 	if (QueueCount > FLOW_CONTROL_UPPER_THRESHOLD) {
 		netif_stop_queue(g_linux_wlan->strInterfaceInfo[0].wilc_netdev);
 		netif_stop_queue(g_linux_wlan->strInterfaceInfo[1].wilc_netdev);
@@ -2259,7 +2205,6 @@  int mac_xmit(struct sk_buff *skb, struct net_device *ndev)
 	return 0;
 }
 
-
 int mac_close(struct net_device *ndev)
 {
 	struct WILC_WFI_priv *priv;
@@ -2282,8 +2227,6 @@  int mac_close(struct net_device *ndev)
 
 	pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
 
-
-
 	PRINT_D(GENERIC_DBG, "Mac close\n");
 
 	if (g_linux_wlan == NULL) {
@@ -2329,7 +2272,6 @@  int mac_close(struct net_device *ndev)
 	return 0;
 }
 
-
 int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
 {
 
@@ -2340,8 +2282,6 @@  int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
 	struct WILC_WFI_priv *priv;
 	s32 s32Error = WILC_SUCCESS;
 
-
-
 	/* struct iwreq *wrq = (struct iwreq *) req;	// tony moved to case SIOCSIWPRIV */
 	#ifdef USE_WIRELESS
 	nic = netdev_priv(ndev);
@@ -2435,7 +2375,6 @@  void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset)
 		frame_len = size;
 		buff_to_send = buff;
 
-
 		/* Need to send the packet up to the host, allocate a skb buffer */
 		skb = dev_alloc_skb(frame_len);
 		if (skb == NULL) {
@@ -2600,7 +2539,6 @@  int wilc_netdev_init(void)
 		}
 		#endif
 
-
 		if (register_netdev(ndev)) {
 			PRINT_ER("Device couldn't be registered - %s\n", ndev->name);
 			return -1; /* ERROR */
@@ -2624,12 +2562,9 @@  int wilc_netdev_init(void)
 	return 0;
 }
 
-
 /*The 1st function called after module inserted*/
 static int __init init_wilc_driver(void)
 {
-
-
 #if defined (WILC_DEBUGFS)
 	if (wilc_debugfs_init() < 0) {
 		PRINT_D(GENERIC_DBG, "fail to create debugfs for wilc driver\n");
@@ -2679,13 +2614,11 @@  static void __exit exit_wilc_driver(void)
 			nic[i] = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
 	}
 
-
 	if ((g_linux_wlan != NULL) && g_linux_wlan->wilc_firmware != NULL) {
 		release_firmware(g_linux_wlan->wilc_firmware);
 		g_linux_wlan->wilc_firmware = NULL;
 	}
 
-
 	if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL)
 				       || ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) {
 		PRINT_D(INIT_DBG, "Waiting for mac_close ....\n");
@@ -2695,7 +2628,6 @@  static void __exit exit_wilc_driver(void)
 		else
 			PRINT_D(INIT_DBG, "mac_closed\n");
 
-
 		for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
 			/* close all opened interfaces */
 			if (g_linux_wlan->strInterfaceInfo[i].wilc_netdev != NULL) {
@@ -2715,7 +2647,6 @@  static void __exit exit_wilc_driver(void)
 		}
 	}
 
-
 #ifdef USE_WIRELESS
 #ifdef WILC_AP_EXTERNAL_MLME
 	/* Bug 4600 : WILC_WFI_deinit_mon_interface was already called at mac_close */