diff mbox

[2/2] ath10k: Fix CCK h/w rates for QCA99X0 and newer chipsets

Message ID 1463746399-22839-2-git-send-email-mohammed@qca.qualcomm.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Mohammed Shafi Shajakhan May 20, 2016, 12:13 p.m. UTC 
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

CCK hardware table mapping from QCA99X0 onwards got revised.
The CCK hardware rate values are in a proper order wrt. to
rate and preamble as below

ATH10K_HW_RATE_REV2_CCK_LP_1M = 1,
ATH10K_HW_RATE_REV2_CCK_LP_2M = 2,
ATH10K_HW_RATE_REV2_CCK_LP_5_5M = 3,
ATH10K_HW_RATE_REV2_CCK_LP_11M = 4,
ATH10K_HW_RATE_REV2_CCK_SP_2M = 5,
ATH10K_HW_RATE_REV2_CCK_SP_5_5M = 6,
ATH10K_HW_RATE_REV2_CCK_SP_11M = 7,

This results in reporting of rx frames (with CCK rates)
totally wrong for QCA99X0, QCA4019. Fix this by having
separate CCK rate table for these chipsets with rev2 suffix
and registering the correct rate mapping to mac80211 based on
the new hw_param (introduced) 'cck_rate_map_rev2' which shall
be true for any newchipsets from QCA99X0 onwards

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
[thanks Michal/Kalle/Vasanth for the first level review]

 drivers/net/wireless/ath/ath10k/core.c |    2 ++
 drivers/net/wireless/ath/ath10k/core.h |    6 +++++
 drivers/net/wireless/ath/ath10k/hw.h   |   10 ++++++++
 drivers/net/wireless/ath/ath10k/mac.c  |   39 ++++++++++++++++++++++++++++++--
 4 files changed, 55 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 49af624..86ed64d 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -148,6 +148,7 @@  static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 7,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
+		.cck_rate_map_rev2 = true,
 		.channel_counters_freq_hz = 150000,
 		.max_probe_resp_desc_thres = 24,
 		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
@@ -205,6 +206,7 @@  static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.has_shifted_cc_wraparound = true,
 		.otp_exe_param = 0x0010000,
 		.continuous_frag_desc = true,
+		.cck_rate_map_rev2 = true,
 		.channel_counters_freq_hz = 125000,
 		.max_probe_resp_desc_thres = 24,
 		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 1852e0e..04cea23 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -716,6 +716,12 @@  struct ath10k {
 		 */
 		bool continuous_frag_desc;
 
+		/* CCK hardware rate table mapping for the newer chipsets
+		 * like QCA99X0, QCA4019 got revised. The CCK h/w rate values
+		 * are in a proper order with respect to the rate/preamble
+		 */
+		bool cck_rate_map_rev2;
+
 		u32 channel_counters_freq_hz;
 
 		/* Mgmt tx descriptors threshold for limiting probe response
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index aedd898..3d5648d 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -315,6 +315,16 @@  enum ath10k_hw_rate_cck {
 	ATH10K_HW_RATE_CCK_SP_2M,
 };
 
+enum ath10k_hw_rate_rev2_cck {
+	ATH10K_HW_RATE_REV2_CCK_LP_1M = 1,
+	ATH10K_HW_RATE_REV2_CCK_LP_2M,
+	ATH10K_HW_RATE_REV2_CCK_LP_5_5M,
+	ATH10K_HW_RATE_REV2_CCK_LP_11M,
+	ATH10K_HW_RATE_REV2_CCK_SP_2M,
+	ATH10K_HW_RATE_REV2_CCK_SP_5_5M,
+	ATH10K_HW_RATE_REV2_CCK_SP_11M,
+};
+
 enum ath10k_hw_4addr_pad {
 	ATH10K_HW_4ADDR_PAD_AFTER,
 	ATH10K_HW_4ADDR_PAD_BEFORE,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6dd1d26..a55e3ae 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -62,6 +62,32 @@  static struct ieee80211_rate ath10k_rates[] = {
 	{ .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M },
 };
 
+static struct ieee80211_rate ath10k_rates_rev2[] = {
+	{ .bitrate = 10,
+	  .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_1M },
+	{ .bitrate = 20,
+	  .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_2M,
+	  .hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_2M,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55,
+	  .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_5_5M,
+	  .hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_5_5M,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110,
+	  .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_11M,
+	  .hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_11M,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+
+	{ .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M },
+	{ .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M },
+	{ .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M },
+	{ .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M },
+	{ .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M },
+	{ .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M },
+	{ .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M },
+	{ .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M },
+};
+
 #define ATH10K_MAC_FIRST_OFDM_RATE_IDX 4
 
 #define ath10k_a_rates (ath10k_rates + ATH10K_MAC_FIRST_OFDM_RATE_IDX)
@@ -70,6 +96,9 @@  static struct ieee80211_rate ath10k_rates[] = {
 #define ath10k_g_rates (ath10k_rates + 0)
 #define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
 
+#define ath10k_g_rates_rev2 (ath10k_rates_rev2 + 0)
+#define ath10k_g_rates_rev2_size (ARRAY_SIZE(ath10k_rates_rev2))
+
 static bool ath10k_mac_bitrate_is_cck(int bitrate)
 {
 	switch (bitrate) {
@@ -7695,8 +7724,14 @@  int ath10k_mac_register(struct ath10k *ar)
 		band = &ar->mac.sbands[NL80211_BAND_2GHZ];
 		band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
 		band->channels = channels;
-		band->n_bitrates = ath10k_g_rates_size;
-		band->bitrates = ath10k_g_rates;
+
+		if (ar->hw_params.cck_rate_map_rev2) {
+			band->n_bitrates = ath10k_g_rates_rev2_size;
+			band->bitrates = ath10k_g_rates_rev2;
+		} else {
+			band->n_bitrates = ath10k_g_rates_size;
+			band->bitrates = ath10k_g_rates;
+		}
 
 		ar->hw->wiphy->bands[NL80211_BAND_2GHZ] = band;
 	}