diff mbox

[v2] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules

Message ID 20170223135253.1681-1-ryan@mounce.com.au (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Ryan Mounce Feb. 23, 2017, 1:52 p.m. UTC
Sourced from the current legislation at
https://www.legislation.gov.au/Details/F2016C00432

The current rules exceed legal limits between 5250-5330MHz, and permit
illegal operation in 5600-5650MHz (disallowed regardless of DFS).

Frequency ranges and EIRP limits for all ranges have been updated to
match items 59-63, 65 in the linked document. As the rules for AU have
never previously mirrored local regulations, changes include a
significant increase in the allowable 2.4GHz EIRP and smaller increases
in most other bands.

In order to allow 80MHz operation between 5650-5730MHz (bordering two
bands) the lower, more restrictive band has been rounded up by 5MHz.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
---
 db.txt | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

Comments

Seth Forshee Feb. 23, 2017, 3:35 p.m. UTC | #1
On Fri, Feb 24, 2017 at 12:22:53AM +1030, Ryan Mounce wrote:
> Sourced from the current legislation at
> https://www.legislation.gov.au/Details/F2016C00432
> 
> The current rules exceed legal limits between 5250-5330MHz, and permit
> illegal operation in 5600-5650MHz (disallowed regardless of DFS).
> 
> Frequency ranges and EIRP limits for all ranges have been updated to
> match items 59-63, 65 in the linked document. As the rules for AU have
> never previously mirrored local regulations, changes include a
> significant increase in the allowable 2.4GHz EIRP and smaller increases
> in most other bands.
> 
> In order to allow 80MHz operation between 5650-5730MHz (bordering two
> bands) the lower, more restrictive band has been rounded up by 5MHz.
> 
> Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
> ---
>  db.txt | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/db.txt b/db.txt
> index 05108e0..00e81b6 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -85,12 +85,17 @@ country AT: DFS-ETSI
>  	# 60 GHz band channels 1-4, ref: Etsi En 302 567
>  	(57000 - 66000 @ 2160), (40)
>  
> +# Source:
> +# https://www.legislation.gov.au/Details/F2016C00432
> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B
>  country AU: DFS-ETSI
> -	(2402 - 2482 @ 40), (20)
> -	(5170 - 5250 @ 80), (17), AUTO-BW
> -	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
> -	(5490 - 5710 @ 160), (24), DFS
> -	(5735 - 5835 @ 80), (30)
> +	(2400 - 2483.5 @ 40), (36)

The mention of ETSI EN 300 328 in item 55 (a) leads me to believe that
this is the limit we should be using, i.e. 500 mW. It is a bit confusing
though since it seems like such devices would also fall under "digital
modulation transmitters." 

> +	(5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW

This looks correct.

> +	(5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS

Since this range requires TPC we need to set the power limit at 100 mW.

> +	(5470 - 5600 @ 80), (30), DFS
> +	(5650 - 5730 @ 80), (30), DFS

These ranges also require TPC so we need to set the limit at 500 mW.

> +	(5730 - 5850 @ 80), (36)

In the document the ranges are 5650-5725 MHz and 5725-5850 MHz. I
suspect that the existing rules fudge that to line up with the wifi
channels, which technically is okay because the rules in the former
range are more restrictive. I wonder if we shouldn't be recording them
here as per the document and adding AUTO-BW. Johannes, any thoughts?

> +	(57000 - 66000 @ 2160), (43), NO-OUTDOOR

This looks correct.

Thanks,
Seth
Ryan Mounce Feb. 24, 2017, 2:50 a.m. UTC | #2
On 24 February 2017 at 02:05, Seth Forshee <seth.forshee@canonical.com> wrote:
> On Fri, Feb 24, 2017 at 12:22:53AM +1030, Ryan Mounce wrote:
>> Sourced from the current legislation at
>> https://www.legislation.gov.au/Details/F2016C00432
>>
>> The current rules exceed legal limits between 5250-5330MHz, and permit
>> illegal operation in 5600-5650MHz (disallowed regardless of DFS).
>>
>> Frequency ranges and EIRP limits for all ranges have been updated to
>> match items 59-63, 65 in the linked document. As the rules for AU have
>> never previously mirrored local regulations, changes include a
>> significant increase in the allowable 2.4GHz EIRP and smaller increases
>> in most other bands.
>>
>> In order to allow 80MHz operation between 5650-5730MHz (bordering two
>> bands) the lower, more restrictive band has been rounded up by 5MHz.
>>
>> Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
>> ---
>>  db.txt | 15 ++++++++++-----
>>  1 file changed, 10 insertions(+), 5 deletions(-)
>>
>> diff --git a/db.txt b/db.txt
>> index 05108e0..00e81b6 100644
>> --- a/db.txt
>> +++ b/db.txt
>> @@ -85,12 +85,17 @@ country AT: DFS-ETSI
>>       # 60 GHz band channels 1-4, ref: Etsi En 302 567
>>       (57000 - 66000 @ 2160), (40)
>>
>> +# Source:
>> +# https://www.legislation.gov.au/Details/F2016C00432
>> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B
>>  country AU: DFS-ETSI
>> -     (2402 - 2482 @ 40), (20)
>> -     (5170 - 5250 @ 80), (17), AUTO-BW
>> -     (5250 - 5330 @ 80), (24), DFS, AUTO-BW
>> -     (5490 - 5710 @ 160), (24), DFS
>> -     (5735 - 5835 @ 80), (30)
>> +     (2400 - 2483.5 @ 40), (36)
>
> The mention of ETSI EN 300 328 in item 55 (a) leads me to believe that
> this is the limit we should be using, i.e. 500 mW. It is a bit confusing
> though since it seems like such devices would also fall under "digital
> modulation transmitters."

Item 55 applies only to frequency hopping transmitters e.g. Bluetooth.
As a local, I can say with some degree of certainty that 4W/36dBm is
the correct 2.4GHz ISM EIRP for Australia. It is advertised as the
EIRP in the 802.11d IE of commercial devices e.g. Cisco Aironet APs
and widely deployed ISP gateways in Australia, among other devices
that have received relevant approvals.

>> +     (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
>
> This looks correct.
>
>> +     (5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS
>
> Since this range requires TPC we need to set the power limit at 100 mW.
>
>> +     (5470 - 5600 @ 80), (30), DFS
>> +     (5650 - 5730 @ 80), (30), DFS
>
> These ranges also require TPC so we need to set the limit at 500 mW.

I was unsure about this one. Setting this to 27dBm also affects the
802.11d country information IE, however when the DFS flag is set a 3dB
802.11h power constraint IE is also advertised so stations will limit
themselves to (27-3)=24dBm/250mW.

Given the choice between unnecessarily halving transmit power on
stations and potentially transmitting at twice the permissible power
on APs without TPC I agree that the conservative approach should be
taken for now. Ideally I think that the actual EIRP limits should be
in the regdb and a 3dB constraint should be applied automatically on
APs that cannot support TPC when the DFS flag is set.

>> +     (5730 - 5850 @ 80), (36)
>
> In the document the ranges are 5650-5725 MHz and 5725-5850 MHz. I
> suspect that the existing rules fudge that to line up with the wifi
> channels, which technically is okay because the rules in the former
> range are more restrictive. I wonder if we shouldn't be recording them
> here as per the document and adding AUTO-BW. Johannes, any thoughts?

I've tested with AUTO-BW and it doesn't work in this case as channel
144 will be disabled if it doesn't exist entirely within one band.
Fudging the more restrictive rules by a mere 5MHz to fit 802.11
channels seems to be the status quo.

>> +     (57000 - 66000 @ 2160), (43), NO-OUTDOOR
>
> This looks correct.
>
> Thanks,
> Seth


Regards,
Ryan Mounce
Seth Forshee Feb. 24, 2017, 2:55 p.m. UTC | #3
On Fri, Feb 24, 2017 at 01:20:24PM +1030, Ryan Mounce wrote:
> On 24 February 2017 at 02:05, Seth Forshee <seth.forshee@canonical.com> wrote:
> > On Fri, Feb 24, 2017 at 12:22:53AM +1030, Ryan Mounce wrote:
> >> Sourced from the current legislation at
> >> https://www.legislation.gov.au/Details/F2016C00432
> >>
> >> The current rules exceed legal limits between 5250-5330MHz, and permit
> >> illegal operation in 5600-5650MHz (disallowed regardless of DFS).
> >>
> >> Frequency ranges and EIRP limits for all ranges have been updated to
> >> match items 59-63, 65 in the linked document. As the rules for AU have
> >> never previously mirrored local regulations, changes include a
> >> significant increase in the allowable 2.4GHz EIRP and smaller increases
> >> in most other bands.
> >>
> >> In order to allow 80MHz operation between 5650-5730MHz (bordering two
> >> bands) the lower, more restrictive band has been rounded up by 5MHz.
> >>
> >> Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
> >> ---
> >>  db.txt | 15 ++++++++++-----
> >>  1 file changed, 10 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/db.txt b/db.txt
> >> index 05108e0..00e81b6 100644
> >> --- a/db.txt
> >> +++ b/db.txt
> >> @@ -85,12 +85,17 @@ country AT: DFS-ETSI
> >>       # 60 GHz band channels 1-4, ref: Etsi En 302 567
> >>       (57000 - 66000 @ 2160), (40)
> >>
> >> +# Source:
> >> +# https://www.legislation.gov.au/Details/F2016C00432
> >> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B
> >>  country AU: DFS-ETSI
> >> -     (2402 - 2482 @ 40), (20)
> >> -     (5170 - 5250 @ 80), (17), AUTO-BW
> >> -     (5250 - 5330 @ 80), (24), DFS, AUTO-BW
> >> -     (5490 - 5710 @ 160), (24), DFS
> >> -     (5735 - 5835 @ 80), (30)
> >> +     (2400 - 2483.5 @ 40), (36)
> >
> > The mention of ETSI EN 300 328 in item 55 (a) leads me to believe that
> > this is the limit we should be using, i.e. 500 mW. It is a bit confusing
> > though since it seems like such devices would also fall under "digital
> > modulation transmitters."
> 
> Item 55 applies only to frequency hopping transmitters e.g. Bluetooth.
> As a local, I can say with some degree of certainty that 4W/36dBm is
> the correct 2.4GHz ISM EIRP for Australia. It is advertised as the
> EIRP in the 802.11d IE of commercial devices e.g. Cisco Aironet APs
> and widely deployed ISP gateways in Australia, among other devices
> that have received relevant approvals.

Okay, looking at that section again that makes sense.

> >> +     (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
> >
> > This looks correct.
> >
> >> +     (5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS
> >
> > Since this range requires TPC we need to set the power limit at 100 mW.
> >
> >> +     (5470 - 5600 @ 80), (30), DFS
> >> +     (5650 - 5730 @ 80), (30), DFS
> >
> > These ranges also require TPC so we need to set the limit at 500 mW.
> 
> I was unsure about this one. Setting this to 27dBm also affects the
> 802.11d country information IE, however when the DFS flag is set a 3dB
> 802.11h power constraint IE is also advertised so stations will limit
> themselves to (27-3)=24dBm/250mW.
> 
> Given the choice between unnecessarily halving transmit power on
> stations and potentially transmitting at twice the permissible power
> on APs without TPC I agree that the conservative approach should be
> taken for now. Ideally I think that the actual EIRP limits should be
> in the regdb and a 3dB constraint should be applied automatically on
> APs that cannot support TPC when the DFS flag is set.
> 
> >> +     (5730 - 5850 @ 80), (36)
> >
> > In the document the ranges are 5650-5725 MHz and 5725-5850 MHz. I
> > suspect that the existing rules fudge that to line up with the wifi
> > channels, which technically is okay because the rules in the former
> > range are more restrictive. I wonder if we shouldn't be recording them
> > here as per the document and adding AUTO-BW. Johannes, any thoughts?
> 
> I've tested with AUTO-BW and it doesn't work in this case as channel
> 144 will be disabled if it doesn't exist entirely within one band.
> Fudging the more restrictive rules by a mere 5MHz to fit 802.11
> channels seems to be the status quo.

I wonder why AUTO-BW doesn't work. In that case it's certainly fine to
keep those ranges as they are.

Thanks,
Seth
diff mbox

Patch

diff --git a/db.txt b/db.txt
index 05108e0..00e81b6 100644
--- a/db.txt
+++ b/db.txt
@@ -85,12 +85,17 @@  country AT: DFS-ETSI
 	# 60 GHz band channels 1-4, ref: Etsi En 302 567
 	(57000 - 66000 @ 2160), (40)
 
+# Source:
+# https://www.legislation.gov.au/Details/F2016C00432
+# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B
 country AU: DFS-ETSI
-	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (17), AUTO-BW
-	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
-	(5490 - 5710 @ 160), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(2400 - 2483.5 @ 40), (36)
+	(5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
+	(5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS
+	(5470 - 5600 @ 80), (30), DFS
+	(5650 - 5730 @ 80), (30), DFS
+	(5730 - 5850 @ 80), (36)
+	(57000 - 66000 @ 2160), (43), NO-OUTDOOR
 
 country AW: DFS-ETSI
 	(2402 - 2482 @ 40), (20)