From patchwork Tue Apr 3 07:53:29 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ping-Ke Shih X-Patchwork-Id: 10320753 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 44F9C602C8 for ; Tue, 3 Apr 2018 07:54:35 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 2CFBF287F0 for ; Tue, 3 Apr 2018 07:54:35 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 21165288C3; Tue, 3 Apr 2018 07:54:35 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9D124289CD for ; Tue, 3 Apr 2018 07:54:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754958AbeDCHy2 (ORCPT ); Tue, 3 Apr 2018 03:54:28 -0400 Received: from rtits2.realtek.com ([211.75.126.72]:36874 "EHLO rtits2.realtek.com.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754932AbeDCHyX (ORCPT ); Tue, 3 Apr 2018 03:54:23 -0400 Authenticated-By: X-SpamFilter-By: BOX Solutions SpamTrap 5.62 with qID w337s4rP012730, This message is accepted by code: ctloc85258 Received: from mail.realtek.com (rtitcasv01.realtek.com.tw [172.21.6.18]) by rtits2.realtek.com.tw (8.15.2/2.57/5.78) with ESMTP id w337s4rP012730; Tue, 3 Apr 2018 15:54:04 +0800 Received: from localhost.localdomain (172.21.69.140) by RTITCASV01.realtek.com.tw (172.21.6.18) with Microsoft SMTP Server id 14.3.294.0; Tue, 3 Apr 2018 15:54:03 +0800 From: To: CC: , Subject: [PATCH v2 14/17] rtlwifi: halmac: add bus interface commands Date: Tue, 3 Apr 2018 15:53:29 +0800 Message-ID: <20180403075332.3344-15-pkshih@realtek.com> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20180403075332.3344-1-pkshih@realtek.com> References: <20180403075332.3344-1-pkshih@realtek.com> MIME-Version: 1.0 X-Originating-IP: [172.21.69.140] Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Ping-Ke Shih The halmac supports three buses interfaces, PCI, USB and SDIO, and this commit makes it possible to change their phy parameters. Signed-off-by: Ping-Ke Shih --- .../halmac_88xx/halmac_8822b/halmac_pcie_8822b.c | 218 +++++ .../halmac_88xx/halmac_8822b/halmac_pcie_8822b.h | 38 + .../halmac_88xx/halmac_8822b/halmac_phy_8822b.c | 148 ++++ .../halmac_88xx/halmac_8822b/halmac_sdio_8822b.c | 880 ++++++++++++++++++++ .../halmac_88xx/halmac_8822b/halmac_sdio_8822b.h | 62 ++ .../halmac_88xx/halmac_8822b/halmac_usb_8822b.c | 161 ++++ .../halmac_88xx/halmac_8822b/halmac_usb_8822b.h | 38 + .../rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.c | 538 +++++++++++++ .../rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.h | 98 +++ .../rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.c | 895 +++++++++++++++++++++ .../rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.h | 75 ++ .../rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.c | 522 ++++++++++++ .../rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.h | 83 ++ .../realtek/rtlwifi/halmac/halmac_intf_phy_cmd.h | 45 ++ .../realtek/rtlwifi/halmac/halmac_pcie_reg.h | 36 + .../realtek/rtlwifi/halmac/halmac_sdio_reg.h | 53 ++ .../realtek/rtlwifi/halmac/halmac_usb_reg.h | 19 + 17 files changed, 3909 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_phy_8822b.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.c create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_intf_phy_cmd.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_pcie_reg.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_sdio_reg.h create mode 100644 drivers/net/wireless/realtek/rtlwifi/halmac/halmac_usb_reg.h diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.c new file mode 100644 index 000000000000..88a148e528a5 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.c @@ -0,0 +1,218 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "halmac_pcie_8822b.h" +#include "halmac_pwr_seq_8822b.h" +#include "../halmac_init_88xx.h" +#include "../halmac_common_88xx.h" +#include "../halmac_pcie_88xx.h" +#include "../halmac_88xx_cfg.h" + +/** + * mac_pwr_switch_pcie_8822b() - switch mac power + * @adapter : the adapter of halmac + * @pwr : power state + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +mac_pwr_switch_pcie_8822b(struct halmac_adapter *adapter, + enum halmac_mac_power pwr) +{ + u8 value8; + u8 rpwm; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + enum halmac_ret_status status; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "pwr = %x\n", + pwr); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "8822B pwr seq ver = %s\n", HALMAC_8822B_PWR_SEQ_VER); + + adapter->rpwm = HALMAC_REG_R8(REG_PCIE_HRPWM1_V1); + + /* Check FW still exist or not */ + if (HALMAC_REG_R16(REG_MCUFW_CTRL) == 0xC078) { + /* Leave 32K */ + rpwm = (u8)((adapter->rpwm ^ BIT(7)) & 0x80); + HALMAC_REG_W8(REG_PCIE_HRPWM1_V1, rpwm); + } + + value8 = HALMAC_REG_R8(REG_CR); + if (value8 == 0xEA) + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + else + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON; + + /* Check if power switch is needed */ + if (pwr == HALMAC_MAC_POWER_ON && + adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_ON) { + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "power state unchange!!\n"); + return HALMAC_RET_PWR_UNCHANGE; + } + + if (pwr == HALMAC_MAC_POWER_OFF) { + status = trxdma_check_idle_88xx(adapter); + if (status != HALMAC_RET_SUCCESS) + return status; + if (pwr_seq_parser_88xx(adapter, card_dis_flow_8822b) != + HALMAC_RET_SUCCESS) { + pr_err("Handle power off cmd error\n"); + return HALMAC_RET_POWER_OFF_FAIL; + } + + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + adapter->halmac_state.dlfw_state = HALMAC_DLFW_NONE; + init_adapter_dynamic_param_88xx(adapter); + } else { + if (pwr_seq_parser_88xx(adapter, card_en_flow_8822b) != + HALMAC_RET_SUCCESS) { + pr_err("Handle power on cmd error\n"); + return HALMAC_RET_POWER_ON_FAIL; + } + + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON; + } + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_pcie_switch_8822b() - pcie gen1/gen2 switch + * @adapter : the adapter of halmac + * @cfg : gen1/gen2 selection + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +pcie_switch_8822b(struct halmac_adapter *adapter, enum halmac_pcie_cfg cfg) +{ + u8 value8; + u32 value32; + u8 speed = 0; + u32 cnt = 0; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (cfg == HALMAC_PCIE_GEN1) { + value8 = dbi_r8_88xx(adapter, LINK_CTRL2_REG_OFFSET) & 0xF0; + dbi_w8_88xx(adapter, LINK_CTRL2_REG_OFFSET, value8 | BIT(0)); + + value32 = dbi_r32_88xx(adapter, GEN2_CTRL_OFFSET); + dbi_w32_88xx(adapter, GEN2_CTRL_OFFSET, value32 | BIT(17)); + + speed = dbi_r8_88xx(adapter, LINK_STATUS_REG_OFFSET) & 0x0F; + cnt = 2000; + + while ((speed != PCIE_GEN1_SPEED) && (cnt != 0)) { + usleep_range(50, 60); + speed = dbi_r8_88xx(adapter, LINK_STATUS_REG_OFFSET); + speed &= 0x0F; + cnt--; + } + + if (speed != PCIE_GEN1_SPEED) { + pr_err("Speed change to GEN1 fail !\n"); + return HALMAC_RET_FAIL; + } + + } else if (cfg == HALMAC_PCIE_GEN2) { + value8 = dbi_r8_88xx(adapter, LINK_CTRL2_REG_OFFSET) & 0xF0; + dbi_w8_88xx(adapter, LINK_CTRL2_REG_OFFSET, value8 | BIT(1)); + + value32 = dbi_r32_88xx(adapter, GEN2_CTRL_OFFSET); + dbi_w32_88xx(adapter, GEN2_CTRL_OFFSET, value32 | BIT(17)); + + speed = dbi_r8_88xx(adapter, LINK_STATUS_REG_OFFSET) & 0x0F; + cnt = 2000; + + while ((speed != PCIE_GEN2_SPEED) && (cnt != 0)) { + usleep_range(50, 60); + speed = dbi_r8_88xx(adapter, LINK_STATUS_REG_OFFSET); + speed &= 0x0F; + cnt--; + } + + if (speed != PCIE_GEN2_SPEED) { + pr_err("Speed change to GEN1 fail !\n"); + return HALMAC_RET_FAIL; + } + + } else { + pr_err("Error Speed !\n"); + return HALMAC_RET_FAIL; + } + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * phy_cfg_pcie_8822b() - phy config + * @adapter : the adapter of halmac + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +phy_cfg_pcie_8822b(struct halmac_adapter *adapter, + enum halmac_intf_phy_platform pltfm) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + status = parse_intf_phy_88xx(adapter, pcie_gen1_phy_param_8822b, pltfm, + HAL_INTF_PHY_PCIE_GEN1); + + if (status != HALMAC_RET_SUCCESS) + return status; + + status = parse_intf_phy_88xx(adapter, pcie_gen2_phy_param_8822b, pltfm, + HAL_INTF_PHY_PCIE_GEN2); + + if (status != HALMAC_RET_SUCCESS) + return status; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * intf_tun_pcie_8822b() - pcie interface fine tuning + * @adapter : the adapter of halmac + * Author : Rick Liu + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +intf_tun_pcie_8822b(struct halmac_adapter *adapter) +{ + return HALMAC_RET_SUCCESS; +} diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.h new file mode 100644 index 000000000000..6616f53df7a8 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_pcie_8822b.h @@ -0,0 +1,38 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef _HALMAC_API_8822B_PCIE_H_ +#define _HALMAC_API_8822B_PCIE_H_ + +#include "../../halmac_api.h" + +extern struct halmac_intf_phy_para pcie_gen1_phy_param_8822b[]; +extern struct halmac_intf_phy_para pcie_gen2_phy_param_8822b[]; + +enum halmac_ret_status +mac_pwr_switch_pcie_8822b(struct halmac_adapter *adapter, + enum halmac_mac_power pwr); + +enum halmac_ret_status +pcie_switch_8822b(struct halmac_adapter *adapter, enum halmac_pcie_cfg cfg); + +enum halmac_ret_status +phy_cfg_pcie_8822b(struct halmac_adapter *adapter, + enum halmac_intf_phy_platform pltfm); + +enum halmac_ret_status +intf_tun_pcie_8822b(struct halmac_adapter *adapter); + +#endif/* _HALMAC_API_8822B_PCIE_H_ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_phy_8822b.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_phy_8822b.c new file mode 100644 index 000000000000..3d5db54c6f26 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_phy_8822b.c @@ -0,0 +1,148 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "../../halmac_type.h" +#include "halmac_usb_8822b.h" +#include "halmac_pcie_8822b.h" + +/** + * ============ip sel item list============ + * HALMAC_IP_INTF_PHY + * USB2 : usb2 phy, 1byte value + * USB3 : usb3 phy, 2byte value + * PCIE1 : pcie gen1 mdio, 2byte value + * PCIE2 : pcie gen2 mdio, 2byte value + * HALMAC_IP_SEL_MAC + * USB2, USB3, PCIE1, PCIE2 : mac ip, 1byte value + * HALMAC_IP_PCIE_DBI + * USB2 USB3 : none + * PCIE1, PCIE2 : pcie dbi, 1byte value + */ + +struct halmac_intf_phy_para usb2_phy_param_8822b[] = { + /* {offset, value, ip sel, cut mask, platform mask} */ + {0xFFFF, 0x00, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_ALL, + HALMAC_INTF_PHY_PLATFORM_ALL}, +}; + +struct halmac_intf_phy_para usb3_phy_param_8822b[] = { + /* {offset, value, ip sel, cut mask, platform mask} */ + {0x0001, 0xA841, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_D, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0xFFFF, 0x0000, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_ALL, + HALMAC_INTF_PHY_PLATFORM_ALL}, +}; + +struct halmac_intf_phy_para pcie_gen1_phy_param_8822b[] = { + /* {offset, value, ip sel, cut mask, platform mask} */ + {0x0001, 0xA841, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0002, 0x60C6, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0008, 0x3596, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0009, 0x321C, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x000A, 0x9623, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0020, 0x94FF, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0021, 0xFFCF, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0026, 0xC006, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0029, 0xFF0E, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x002A, 0x1840, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0xFFFF, 0x0000, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_ALL, + HALMAC_INTF_PHY_PLATFORM_ALL}, +}; + +struct halmac_intf_phy_para pcie_gen2_phy_param_8822b[] = { + /* {offset, value, ip sel, cut mask, platform mask} */ + {0x0001, 0xA841, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0002, 0x60C6, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0008, 0x3597, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0009, 0x321C, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x000A, 0x9623, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0020, 0x94FF, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0021, 0xFFCF, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0026, 0xC006, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x0029, 0xFF0E, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0x002A, 0x3040, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_C, + HALMAC_INTF_PHY_PLATFORM_ALL}, + {0xFFFF, 0x0000, + HALMAC_IP_INTF_PHY, + HALMAC_INTF_PHY_CUT_ALL, + HALMAC_INTF_PHY_PLATFORM_ALL}, +}; diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.c new file mode 100644 index 000000000000..e014f02e30cd --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.c @@ -0,0 +1,880 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "halmac_sdio_8822b.h" +#include "halmac_pwr_seq_8822b.h" +#include "../halmac_init_88xx.h" +#include "../halmac_common_88xx.h" +#include "../halmac_sdio_88xx.h" + +#define WLAN_ACQ_NUM_MAX 8 + +static enum halmac_ret_status +chk_oqt_8822b(struct halmac_adapter *adapter, u32 tx_agg_num, u8 *buf, + u8 macid_cnt); + +static enum halmac_ret_status +update_oqt_free_space_8822b(struct halmac_adapter *adapter); + +static enum halmac_ret_status +update_sdio_free_page_8822b(struct halmac_adapter *adapter); + +static enum halmac_ret_status +chk_qsel_8822b(struct halmac_adapter *adapter, u8 qsel_first, u8 *pkt, + u8 *macid_cnt); + +static enum halmac_ret_status +chk_dma_mapping_8822b(struct halmac_adapter *adapter, u16 **cur_fs, + u8 qsel_first); + +static enum halmac_ret_status +chk_rqd_page_num_8822b(struct halmac_adapter *adapter, u8 *buf, u32 *rqd_pg_num, + u16 **cur_fs, u8 *macid_cnt, u32 tx_agg_num); + +/** + * mac_pwr_switch_sdio_8822b() - switch mac power + * @adapter : the adapter of halmac + * @pwr : power state + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +mac_pwr_switch_sdio_8822b(struct halmac_adapter *adapter, + enum halmac_mac_power pwr) +{ + u8 value8; + u8 rpwm; + u32 imr_backup; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "8822B pwr seq ver = %s\n", HALMAC_8822B_PWR_SEQ_VER); + + adapter->rpwm = HALMAC_REG_R8(REG_SDIO_HRPWM1); + + /* Check FW still exist or not */ + if (HALMAC_REG_R16(REG_MCUFW_CTRL) == 0xC078) { + /* Leave 32K */ + rpwm = (u8)((adapter->rpwm ^ BIT(7)) & 0x80); + HALMAC_REG_W8(REG_SDIO_HRPWM1, rpwm); + } + + value8 = HALMAC_REG_R8(REG_CR); + if (value8 == 0xEA) + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + else + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON; + + /*Check if power switch is needed*/ + if (pwr == HALMAC_MAC_POWER_ON && + adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_ON) { + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "power state unchange!!\n"); + return HALMAC_RET_PWR_UNCHANGE; + } + + imr_backup = HALMAC_REG_R32(REG_SDIO_HIMR); + HALMAC_REG_W32(REG_SDIO_HIMR, 0); + + if (pwr == HALMAC_MAC_POWER_OFF) { + adapter->pwr_off_flow_flag = 1; + if (pwr_seq_parser_88xx(adapter, card_dis_flow_8822b) != + HALMAC_RET_SUCCESS) { + pr_err("Handle power off cmd error\n"); + HALMAC_REG_W32(REG_SDIO_HIMR, imr_backup); + return HALMAC_RET_POWER_OFF_FAIL; + } + + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + adapter->halmac_state.dlfw_state = HALMAC_DLFW_NONE; + adapter->pwr_off_flow_flag = 0; + init_adapter_dynamic_param_88xx(adapter); + } else { + if (pwr_seq_parser_88xx(adapter, card_en_flow_8822b) != + HALMAC_RET_SUCCESS) { + pr_err("Handle power on cmd error\n"); + HALMAC_REG_W32(REG_SDIO_HIMR, imr_backup); + return HALMAC_RET_POWER_ON_FAIL; + } + + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON; + } + + HALMAC_REG_W32(REG_SDIO_HIMR, imr_backup); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_tx_allowed_sdio_88xx() - check tx status + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size, include txdesc + * Author : Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +tx_allowed_sdio_8822b(struct halmac_adapter *adapter, u8 *buf, u32 size) +{ + u16 *cur_fs = NULL; + u32 cnt; + u32 tx_agg_num; + u32 rqd_pg_num = 0; + u8 macid_cnt = 0; + struct halmac_sdio_free_space *fs_info = &adapter->sdio_fs; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + enum halmac_qsel qsel; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (!fs_info->macid_map) { + pr_err("halmac allocate Macid_map Fail!!\n"); + return HALMAC_RET_MALLOC_FAIL; + } + + memset(fs_info->macid_map, 0x00, fs_info->macid_map_size); + + tx_agg_num = GET_TX_DESC_DMA_TXAGG_NUM(buf); + tx_agg_num = (tx_agg_num == 0) ? 1 : tx_agg_num; + + status = chk_rqd_page_num_8822b(adapter, buf, &rqd_pg_num, &cur_fs, + &macid_cnt, tx_agg_num); + if (status != HALMAC_RET_SUCCESS) + return status; + + qsel = (enum halmac_qsel)GET_TX_DESC_QSEL(buf); + if (qsel == HALMAC_QSEL_BCN || qsel == HALMAC_QSEL_CMD) + return HALMAC_RET_SUCCESS; + + cnt = 10; + do { + if ((u32)(*cur_fs + fs_info->pubq_pg_num) > rqd_pg_num) { + status = chk_oqt_8822b(adapter, tx_agg_num, buf, + macid_cnt); + if (status != HALMAC_RET_SUCCESS) { + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, + DBG_WARNING, "oqt buffer full!!\n"); + return status; + } + + if (*cur_fs >= rqd_pg_num) { + *cur_fs -= (u16)rqd_pg_num; + } else { + fs_info->pubq_pg_num -= + (u16)(rqd_pg_num - *cur_fs); + *cur_fs = 0; + } + + break; + } + + update_sdio_free_page_8822b(adapter); + + cnt--; + if (cnt == 0) + return HALMAC_RET_FREE_SPACE_NOT_ENOUGH; + } while (1); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_reg_read_8_sdio_88xx() - read 1byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u8 +reg_r8_sdio_8822b(struct halmac_adapter *adapter, u32 offset) +{ + u8 value8; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if ((offset & 0xFFFF0000) == 0) { + value8 = (u8)r_indir_sdio_88xx(adapter, offset, HALMAC_IO_BYTE); + } else { + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + value8 = PLTFM_SDIO_CMD52_R(offset); + } + + return value8; +} + +/** + * halmac_reg_write_8_sdio_88xx() - write 1byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w8_sdio_8822b(struct halmac_adapter *adapter, u32 offset, u8 value) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if ((offset & 0xFFFF0000) == 0) + offset |= WLAN_IOREG_OFFSET; + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + + PLTFM_SDIO_CMD52_W(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_reg_read_16_sdio_88xx() - read 2byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u16 +reg_r16_sdio_8822b(struct halmac_adapter *adapter, u32 offset) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + union { + __le16 word; + u8 byte[2]; + } value16 = { 0x0000 }; + + if ((offset & 0xFFFF0000) == 0) + return (u16)r_indir_sdio_88xx(adapter, offset, HALMAC_IO_WORD); + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF || + ((offset & (2 - 1)) != 0) || + adapter->sdio_cmd53_4byte == HALMAC_SDIO_CMD53_4BYTE_MODE_RW || + adapter->sdio_cmd53_4byte == HALMAC_SDIO_CMD53_4BYTE_MODE_R) { + value16.byte[0] = PLTFM_SDIO_CMD52_R(offset); + value16.byte[1] = PLTFM_SDIO_CMD52_R(offset + 1); + + return le16_to_cpu(value16.word); + } + + return PLTFM_SDIO_CMD53_R16(offset); +} + +/** + * halmac_reg_write_16_sdio_88xx() - write 2byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w16_sdio_8822b(struct halmac_adapter *adapter, u32 offset, u16 value) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF || + ((offset & (2 - 1)) != 0) || + adapter->sdio_cmd53_4byte == HALMAC_SDIO_CMD53_4BYTE_MODE_RW || + adapter->sdio_cmd53_4byte == HALMAC_SDIO_CMD53_4BYTE_MODE_W) { + if ((offset & 0xFFFF0000) == 0 && ((offset & (2 - 1)) == 0)) { + status = w_indir_sdio_88xx(adapter, offset, value, + HALMAC_IO_WORD); + } else { + if ((offset & 0xFFFF0000) == 0) + offset |= WLAN_IOREG_OFFSET; + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + PLTFM_SDIO_CMD52_W(offset, (u8)(value & 0xFF)); + PLTFM_SDIO_CMD52_W(offset + 1, + (u8)((value & 0xFF00) >> 8)); + } + } else { + if ((offset & 0xFFFF0000) == 0) + offset |= WLAN_IOREG_OFFSET; + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + + PLTFM_SDIO_CMD53_W16(offset, value); + } + return status; +} + +/** + * halmac_reg_read_32_sdio_88xx() - read 4byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u32 +reg_r32_sdio_8822b(struct halmac_adapter *adapter, u32 offset) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + union { + __le32 dword; + u8 byte[4]; + } value32 = { 0x00000000 }; + + if ((offset & 0xFFFF0000) == 0) + return r_indir_sdio_88xx(adapter, offset, HALMAC_IO_DWORD); + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF || + (offset & (4 - 1)) != 0) { + value32.byte[0] = PLTFM_SDIO_CMD52_R(offset); + value32.byte[1] = PLTFM_SDIO_CMD52_R(offset + 1); + value32.byte[2] = PLTFM_SDIO_CMD52_R(offset + 2); + value32.byte[3] = PLTFM_SDIO_CMD52_R(offset + 3); + + return le32_to_cpu(value32.dword); + } + + return PLTFM_SDIO_CMD53_R32(offset); +} + +/** + * halmac_reg_write_32_sdio_88xx() - write 4byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w32_sdio_8822b(struct halmac_adapter *adapter, u32 offset, u32 value) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF || + (offset & (4 - 1)) != 0) { + if ((offset & 0xFFFF0000) == 0 && ((offset & (4 - 1)) == 0)) { + status = w_indir_sdio_88xx(adapter, offset, value, + HALMAC_IO_DWORD); + } else { + if ((offset & 0xFFFF0000) == 0) + offset |= WLAN_IOREG_OFFSET; + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + PLTFM_SDIO_CMD52_W(offset, (u8)(value & 0xFF)); + PLTFM_SDIO_CMD52_W(offset + 1, + (u8)((value >> 8) & 0xFF)); + PLTFM_SDIO_CMD52_W(offset + 2, + (u8)((value >> 16) & 0xFF)); + PLTFM_SDIO_CMD52_W(offset + 3, + (u8)((value >> 24) & 0xFF)); + } + } else { + if ((offset & 0xFFFF0000) == 0) + offset |= WLAN_IOREG_OFFSET; + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + PLTFM_SDIO_CMD53_W32(offset, value); + } + + return status; +} + +static enum halmac_ret_status +chk_oqt_8822b(struct halmac_adapter *adapter, u32 tx_agg_num, u8 *buf, + u8 macid_cnt) +{ + u32 cnt = 10; + struct halmac_sdio_free_space *fs_info = &adapter->sdio_fs; + + /*S0, S1 are not allowed to use, 0x4E4[0] should be 0. Soar 20160323*/ + /*no need to check non_ac_oqt_number*/ + /*HI and MGQ blocked will cause protocal issue before H_OQT being full*/ + switch ((enum halmac_qsel)GET_TX_DESC_QSEL(buf)) { + case HALMAC_QSEL_VO: + case HALMAC_QSEL_VO_V2: + case HALMAC_QSEL_VI: + case HALMAC_QSEL_VI_V2: + case HALMAC_QSEL_BE: + case HALMAC_QSEL_BE_V2: + case HALMAC_QSEL_BK: + case HALMAC_QSEL_BK_V2: + if (macid_cnt > WLAN_ACQ_NUM_MAX && + tx_agg_num > OQT_ENTRY_AC_8822B) { + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "txagg num %d > oqt entry\n", tx_agg_num); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "macid cnt %d > acq max\n", macid_cnt); + } + + cnt = 10; + do { + if (fs_info->ac_empty >= macid_cnt) { + fs_info->ac_empty -= macid_cnt; + break; + } + + if (fs_info->ac_oqt_num >= tx_agg_num) { + fs_info->ac_empty = 0; + fs_info->ac_oqt_num -= (u8)tx_agg_num; + break; + } + + update_oqt_free_space_8822b(adapter); + + cnt--; + if (cnt == 0) + return HALMAC_RET_OQT_NOT_ENOUGH; + } while (1); + break; + case HALMAC_QSEL_MGNT: + case HALMAC_QSEL_HIGH: + if (tx_agg_num > OQT_ENTRY_NOAC_8822B) + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "tx_agg_num %d > oqt entry\n", tx_agg_num); + + cnt = 10; + do { + if (fs_info->non_ac_oqt_num >= tx_agg_num) { + fs_info->non_ac_oqt_num -= (u8)tx_agg_num; + break; + } + + update_oqt_free_space_8822b(adapter); + + cnt--; + if (cnt == 0) + return HALMAC_RET_OQT_NOT_ENOUGH; + } while (1); + break; + default: + break; + } + + return HALMAC_RET_SUCCESS; +} + +static enum halmac_ret_status +update_oqt_free_space_8822b(struct halmac_adapter *adapter) +{ + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + struct halmac_sdio_free_space *fs_info = &adapter->sdio_fs; + u8 value; + u32 oqt_free_page; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + oqt_free_page = HALMAC_REG_R32(REG_SDIO_OQT_FREE_TXPG_V1); + fs_info->ac_oqt_num = (u8)BIT_GET_AC_OQT_FREEPG_V1(oqt_free_page); + fs_info->non_ac_oqt_num = (u8)BIT_GET_NOAC_OQT_FREEPG_V1(oqt_free_page); + fs_info->ac_empty = 0; + if (fs_info->ac_oqt_num == OQT_ENTRY_AC_8822B) { + value = HALMAC_REG_R8(REG_TXPKT_EMPTY); + while (value > 0) { + value = value & (value - 1); + fs_info->ac_empty++; + }; + } else { + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "free_space->ac_oqt_num %d != %d\n", + fs_info->ac_oqt_num, OQT_ENTRY_AC_8822B); + } + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +static enum halmac_ret_status +update_sdio_free_page_8822b(struct halmac_adapter *adapter) +{ + u32 free_page = 0; + u32 free_page2 = 0; + u32 free_page3 = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + struct halmac_sdio_free_space *fs_info = &adapter->sdio_fs; + u8 data[12] = {0}; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + HALMAC_REG_SDIO_RN(REG_SDIO_FREE_TXPG, 12, data); + + free_page = le32_to_cpu(*(__le32 *)(data + 0)); + free_page2 = le32_to_cpu(*(__le32 *)(data + 4)); + free_page3 = le32_to_cpu(*(__le32 *)(data + 8)); + + fs_info->hiq_pg_num = (u16)BIT_GET_HIQ_FREEPG_V1(free_page); + fs_info->miq_pg_num = (u16)BIT_GET_MID_FREEPG_V1(free_page); + fs_info->lowq_pg_num = (u16)BIT_GET_LOW_FREEPG_V1(free_page2); + fs_info->pubq_pg_num = (u16)BIT_GET_PUB_FREEPG_V1(free_page2); + fs_info->exq_pg_num = (u16)BIT_GET_EXQ_FREEPG_V1(free_page3); + fs_info->ac_oqt_num = (u8)BIT_GET_AC_OQT_FREEPG_V1(free_page3); + fs_info->non_ac_oqt_num = (u8)BIT_GET_NOAC_OQT_FREEPG_V1(free_page3); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * phy_cfg_sdio_8822b() - phy config + * @adapter : the adapter of halmac + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +phy_cfg_sdio_8822b(struct halmac_adapter *adapter, + enum halmac_intf_phy_platform pltfm) +{ + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_pcie_switch_8821c() - pcie gen1/gen2 switch + * @adapter : the adapter of halmac + * @cfg : gen1/gen2 selection + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +pcie_switch_sdio_8822b(struct halmac_adapter *adapter, + enum halmac_pcie_cfg cfg) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * intf_tun_sdio_8822b() - sdio interface fine tuning + * @adapter : the adapter of halmac + * Author : Ivan + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +intf_tun_sdio_8822b(struct halmac_adapter *adapter) +{ + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_get_sdio_tx_addr_sdio_88xx() - get CMD53 addr for the TX packet + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size + * @cmd53_addr : cmd53 addr value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +get_sdio_tx_addr_8822b(struct halmac_adapter *adapter, u8 *buf, u32 size, + u32 *cmd53_addr) +{ + u32 len_unit4; + enum halmac_qsel queue_sel; + enum halmac_dma_mapping dma_mapping; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (!buf) { + pr_err("buf is NULL!!\n"); + return HALMAC_RET_DATA_BUF_NULL; + } + + if (size == 0) { + pr_err("size is 0!!\n"); + return HALMAC_RET_DATA_SIZE_INCORRECT; + } + + queue_sel = (enum halmac_qsel)GET_TX_DESC_QSEL(buf); + + switch (queue_sel) { + case HALMAC_QSEL_VO: + case HALMAC_QSEL_VO_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_VO]; + break; + case HALMAC_QSEL_VI: + case HALMAC_QSEL_VI_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_VI]; + break; + case HALMAC_QSEL_BE: + case HALMAC_QSEL_BE_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_BE]; + break; + case HALMAC_QSEL_BK: + case HALMAC_QSEL_BK_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_BK]; + break; + case HALMAC_QSEL_MGNT: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_MG]; + break; + case HALMAC_QSEL_HIGH: + case HALMAC_QSEL_BCN: + case HALMAC_QSEL_CMD: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_HI]; + break; + default: + pr_err("Qsel is out of range\n"); + return HALMAC_RET_QSEL_INCORRECT; + } + + len_unit4 = (size >> 2) + ((size & (4 - 1)) ? 1 : 0); + + switch (dma_mapping) { + case HALMAC_DMA_MAPPING_HIGH: + *cmd53_addr = HALMAC_SDIO_CMD_ADDR_TXFF_HIGH; + break; + case HALMAC_DMA_MAPPING_NORMAL: + *cmd53_addr = HALMAC_SDIO_CMD_ADDR_TXFF_NORMAL; + break; + case HALMAC_DMA_MAPPING_LOW: + *cmd53_addr = HALMAC_SDIO_CMD_ADDR_TXFF_LOW; + break; + case HALMAC_DMA_MAPPING_EXTRA: + *cmd53_addr = HALMAC_SDIO_CMD_ADDR_TXFF_EXTRA; + break; + default: + pr_err("DmaMapping is out of range\n"); + return HALMAC_RET_DMA_MAP_INCORRECT; + } + + *cmd53_addr = (*cmd53_addr << 13) | + (len_unit4 & HALMAC_SDIO_4BYTE_LEN_MASK); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +static enum halmac_ret_status +chk_qsel_8822b(struct halmac_adapter *adapter, u8 qsel_first, u8 *pkt, + u8 *macid_cnt) +{ + u8 flag = 0; + u8 qsel_now; + u8 macid; + struct halmac_sdio_free_space *fs_info = &adapter->sdio_fs; + + macid = (u8)GET_TX_DESC_MACID(pkt); + qsel_now = (u8)GET_TX_DESC_QSEL(pkt); + if (qsel_first == qsel_now) { + if (*(fs_info->macid_map + macid) == 0) { + *(fs_info->macid_map + macid) = 1; + (*macid_cnt)++; + } + } else { + switch ((enum halmac_qsel)qsel_now) { + case HALMAC_QSEL_VO: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_VO_V2) + flag = 1; + break; + case HALMAC_QSEL_VO_V2: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_VO) + flag = 1; + break; + case HALMAC_QSEL_VI: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_VI_V2) + flag = 1; + break; + case HALMAC_QSEL_VI_V2: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_VI) + flag = 1; + break; + case HALMAC_QSEL_BE: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_BE_V2) + flag = 1; + break; + case HALMAC_QSEL_BE_V2: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_BE) + flag = 1; + break; + case HALMAC_QSEL_BK: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_BK_V2) + flag = 1; + break; + case HALMAC_QSEL_BK_V2: + if ((enum halmac_qsel)qsel_first != HALMAC_QSEL_BK) + flag = 1; + break; + case HALMAC_QSEL_MGNT: + case HALMAC_QSEL_HIGH: + case HALMAC_QSEL_BCN: + case HALMAC_QSEL_CMD: + flag = 1; + break; + default: + pr_err("Qsel is out of range\n"); + return HALMAC_RET_QSEL_INCORRECT; + } + if (flag == 1) { + pr_err("Multi-Qsel is not allowed\n"); + pr_err("qsel = %d, %d\n", qsel_first, qsel_now); + return HALMAC_RET_QSEL_INCORRECT; + } + if (*(fs_info->macid_map + macid + MACID_MAX_8822B) == 0) { + *(fs_info->macid_map + macid + MACID_MAX_8822B) = 1; + (*macid_cnt)++; + } + } + + return HALMAC_RET_SUCCESS; +} + +static enum halmac_ret_status +chk_dma_mapping_8822b(struct halmac_adapter *adapter, u16 **cur_fs, + u8 qsel_first) +{ + enum halmac_dma_mapping dma_mapping; + + switch ((enum halmac_qsel)qsel_first) { + case HALMAC_QSEL_VO: + case HALMAC_QSEL_VO_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_VO]; + break; + case HALMAC_QSEL_VI: + case HALMAC_QSEL_VI_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_VI]; + break; + case HALMAC_QSEL_BE: + case HALMAC_QSEL_BE_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_BE]; + break; + case HALMAC_QSEL_BK: + case HALMAC_QSEL_BK_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_BK]; + break; + case HALMAC_QSEL_MGNT: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_MG]; + break; + case HALMAC_QSEL_HIGH: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_HI]; + break; + case HALMAC_QSEL_BCN: + case HALMAC_QSEL_CMD: + *cur_fs = &adapter->sdio_fs.hiq_pg_num; + return HALMAC_RET_SUCCESS; + default: + pr_err("Qsel is out of range: %d\n", qsel_first); + return HALMAC_RET_QSEL_INCORRECT; + } + + switch (dma_mapping) { + case HALMAC_DMA_MAPPING_HIGH: + *cur_fs = &adapter->sdio_fs.hiq_pg_num; + break; + case HALMAC_DMA_MAPPING_NORMAL: + *cur_fs = &adapter->sdio_fs.miq_pg_num; + break; + case HALMAC_DMA_MAPPING_LOW: + *cur_fs = &adapter->sdio_fs.lowq_pg_num; + break; + case HALMAC_DMA_MAPPING_EXTRA: + *cur_fs = &adapter->sdio_fs.exq_pg_num; + break; + default: + pr_err("DmaMapping is out of range\n"); + return HALMAC_RET_DMA_MAP_INCORRECT; + } + + return HALMAC_RET_SUCCESS; +} + +static enum halmac_ret_status +chk_rqd_page_num_8822b(struct halmac_adapter *adapter, u8 *buf, u32 *rqd_pg_num, + u16 **cur_fs, u8 *macid_cnt, u32 tx_agg_num) +{ + u8 *pkt; + u8 qsel_first; + u32 i; + u32 pkt_size; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + pkt = buf; + + qsel_first = (u8)GET_TX_DESC_QSEL(pkt); + + status = chk_dma_mapping_8822b(adapter, cur_fs, qsel_first); + if (status != HALMAC_RET_SUCCESS) + return status; + + for (i = 0; i < tx_agg_num; i++) { + /*QSEL parser*/ + status = chk_qsel_8822b(adapter, qsel_first, pkt, macid_cnt); + if (status != HALMAC_RET_SUCCESS) + return status; + + /*Page number parser*/ + pkt_size = GET_TX_DESC_TXPKTSIZE(pkt) + GET_TX_DESC_OFFSET(pkt); + *rqd_pg_num += (pkt_size >> TX_PAGE_SIZE_SHIFT_88XX) + + ((pkt_size & (TX_PAGE_SIZE_88XX - 1)) ? 1 : 0); + + pkt += ALIGN(GET_TX_DESC_TXPKTSIZE(pkt) + + (GET_TX_DESC_PKT_OFFSET(pkt) << 3) + + TX_DESC_SIZE_88XX, 8); + } + + return HALMAC_RET_SUCCESS; +} diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.h new file mode 100644 index 000000000000..c29fba2d8a8f --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_sdio_8822b.h @@ -0,0 +1,62 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef _HALMAC_API_8822B_SDIO_H_ +#define _HALMAC_API_8822B_SDIO_H_ + +#include "../../halmac_api.h" +#include "halmac_8822b_cfg.h" + +enum halmac_ret_status +mac_pwr_switch_sdio_8822b(struct halmac_adapter *adapter, + enum halmac_mac_power pwr); + +enum halmac_ret_status +tx_allowed_sdio_8822b(struct halmac_adapter *adapter, u8 *buf, u32 size); + +u8 +reg_r8_sdio_8822b(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w8_sdio_8822b(struct halmac_adapter *adapter, u32 offset, u8 value); + +u16 +reg_r16_sdio_8822b(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w16_sdio_8822b(struct halmac_adapter *adapter, u32 offset, u16 value); + +u32 +reg_r32_sdio_8822b(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w32_sdio_8822b(struct halmac_adapter *adapter, u32 offset, u32 value); + +enum halmac_ret_status +phy_cfg_sdio_8822b(struct halmac_adapter *adapter, + enum halmac_intf_phy_platform pltfm); + +enum halmac_ret_status +pcie_switch_sdio_8822b(struct halmac_adapter *adapter, + enum halmac_pcie_cfg cfg); + +enum halmac_ret_status +intf_tun_sdio_8822b(struct halmac_adapter *adapter); + +enum halmac_ret_status +get_sdio_tx_addr_8822b(struct halmac_adapter *adapter, u8 *buf, u32 size, + u32 *cmd53_addr); + +#endif/* _HALMAC_API_8822B_SDIO_H_ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.c new file mode 100644 index 000000000000..a8d8b6d50063 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.c @@ -0,0 +1,161 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "halmac_usb_8822b.h" +#include "halmac_pwr_seq_8822b.h" +#include "../halmac_init_88xx.h" +#include "../halmac_common_88xx.h" + +/** + * mac_pwr_switch_usb_8822b() - switch mac power + * @adapter : the adapter of halmac + * @pwr : power state + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +mac_pwr_switch_usb_8822b(struct halmac_adapter *adapter, + enum halmac_mac_power pwr) +{ + u8 value8; + u8 rpwm; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s\n", + __func__); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%x\n", pwr); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "8821C pwr seq ver = %s\n", HALMAC_8822B_PWR_SEQ_VER); + + adapter->rpwm = HALMAC_REG_R8(0xFE58); + + /* Check FW still exist or not */ + if (HALMAC_REG_R16(REG_MCUFW_CTRL) == 0xC078) { + /* Leave 32K */ + rpwm = (u8)((adapter->rpwm ^ BIT(7)) & 0x80); + HALMAC_REG_W8(0xFE58, rpwm); + } + + value8 = HALMAC_REG_R8(REG_CR); + if (value8 == 0xEA) { + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + } else { + if (BIT(0) == (HALMAC_REG_R8(REG_SYS_STATUS1 + 1) & BIT(0))) + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + else + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON; + } + + /*Check if power switch is needed*/ + if (pwr == HALMAC_MAC_POWER_ON && + adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_ON) { + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "power state unchange!!\n"); + return HALMAC_RET_PWR_UNCHANGE; + } + + if (pwr == HALMAC_MAC_POWER_OFF) { + if (pwr_seq_parser_88xx(adapter, card_dis_flow_8822b) != + HALMAC_RET_SUCCESS) { + pr_err("Handle power off cmd error\n"); + return HALMAC_RET_POWER_OFF_FAIL; + } + + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_OFF; + adapter->halmac_state.dlfw_state = HALMAC_DLFW_NONE; + init_adapter_dynamic_param_88xx(adapter); + } else { + if (pwr_seq_parser_88xx(adapter, card_en_flow_8822b) != + HALMAC_RET_SUCCESS) { + pr_err("Handle power on cmd error\n"); + return HALMAC_RET_POWER_ON_FAIL; + } + + HALMAC_REG_W8_CLR(REG_SYS_STATUS1 + 1, BIT(0)); + + if ((HALMAC_REG_R8(REG_SW_MDIO + 3) & BIT(0)) == BIT(0)) + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "[ALWAYS]shall R reg twice!!\n"); + + adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON; + } + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * phy_cfg_usb_8822b() - phy config + * @adapter : the adapter of halmac + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +phy_cfg_usb_8822b(struct halmac_adapter *adapter, + enum halmac_intf_phy_platform pltfm) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + status = parse_intf_phy_88xx(adapter, usb2_phy_param_8822b, pltfm, + HAL_INTF_PHY_USB2); + + if (status != HALMAC_RET_SUCCESS) + return status; + + status = parse_intf_phy_88xx(adapter, usb3_phy_param_8822b, pltfm, + HAL_INTF_PHY_USB3); + + if (status != HALMAC_RET_SUCCESS) + return status; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * halmac_pcie_switch_8822b() - pcie gen1/gen2 switch + * @adapter : the adapter of halmac + * @cfg : gen1/gen2 selection + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +pcie_switch_usb_8822b(struct halmac_adapter *adapter, enum halmac_pcie_cfg cfg) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * intf_tun_usb_8822b() - usb interface fine tuning + * @adapter : the adapter of halmac + * Author : Ivan + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +intf_tun_usb_8822b(struct halmac_adapter *adapter) +{ + return HALMAC_RET_SUCCESS; +} diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.h new file mode 100644 index 000000000000..683b45e36c3b --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.h @@ -0,0 +1,38 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef _HALMAC_API_8822B_USB_H_ +#define _HALMAC_API_8822B_USB_H_ + +#include "../../halmac_api.h" + +extern struct halmac_intf_phy_para usb2_phy_param_8822b[]; +extern struct halmac_intf_phy_para usb3_phy_param_8822b[]; + +enum halmac_ret_status +mac_pwr_switch_usb_8822b(struct halmac_adapter *adapter, + enum halmac_mac_power pwr); + +enum halmac_ret_status +phy_cfg_usb_8822b(struct halmac_adapter *adapter, + enum halmac_intf_phy_platform pltfm); + +enum halmac_ret_status +pcie_switch_usb_8822b(struct halmac_adapter *adapter, enum halmac_pcie_cfg cfg); + +enum halmac_ret_status +intf_tun_usb_8822b(struct halmac_adapter *adapter); + +#endif/* _HALMAC_API_8822B_USB_H_ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.c new file mode 100644 index 000000000000..01450a84cfde --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.c @@ -0,0 +1,538 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "halmac_pcie_88xx.h" + +/** + * init_pcie_cfg_88xx() - init PCIe + * @adapter : the adapter of halmac + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +init_pcie_cfg_88xx(struct halmac_adapter *adapter) +{ + return HALMAC_RET_SUCCESS; +} + +/** + * deinit_pcie_cfg_88xx() - deinit PCIE + * @adapter : the adapter of halmac + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +deinit_pcie_cfg_88xx(struct halmac_adapter *adapter) +{ + return HALMAC_RET_SUCCESS; +} + +/** + * cfg_pcie_rx_agg_88xx() - config rx aggregation + * @adapter : the adapter of halmac + * @halmac_rx_agg_mode + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +cfg_pcie_rx_agg_88xx(struct halmac_adapter *adapter, + struct halmac_rxagg_cfg *cfg) +{ + return HALMAC_RET_SUCCESS; +} + +/** + * reg_r8_pcie_88xx() - read 1byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u8 +reg_r8_pcie_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return PLTFM_REG_R8(offset); +} + +/** + * reg_w8_pcie_88xx() - write 1byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w8_pcie_88xx(struct halmac_adapter *adapter, u32 offset, u8 value) +{ + PLTFM_REG_W8(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * reg_r16_pcie_88xx() - read 2byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u16 +reg_r16_pcie_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return PLTFM_REG_R16(offset); +} + +/** + * reg_w16_pcie_88xx() - write 2byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w16_pcie_88xx(struct halmac_adapter *adapter, u32 offset, u16 value) +{ + PLTFM_REG_W16(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * reg_r32_pcie_88xx() - read 4byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u32 +reg_r32_pcie_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return PLTFM_REG_R32(offset); +} + +/** + * reg_w32_pcie_88xx() - write 4byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w32_pcie_88xx(struct halmac_adapter *adapter, u32 offset, u32 value) +{ + PLTFM_REG_W32(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * cfg_txagg_pcie_align_88xx() -config sdio bus tx agg alignment + * @adapter : the adapter of halmac + * @enable : function enable(1)/disable(0) + * @align_size : sdio bus tx agg alignment size (2^n, n = 3~11) + * Author : Soar Tu + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +cfg_txagg_pcie_align_88xx(struct halmac_adapter *adapter, u8 enable, + u16 align_size) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * tx_allowed_pcie_88xx() - check tx status + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size, include txdesc + * Author : Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +tx_allowed_pcie_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * pcie_indirect_reg_r32_88xx() - read MAC reg by SDIO reg + * @adapter : the adapter of halmac + * @offset : register offset + * Author : Soar + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u32 +pcie_indirect_reg_r32_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return 0xFFFFFFFF; +} + +/** + * pcie_reg_rn_88xx() - read n byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @size : register value size + * @value : register value + * Author : Soar + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +pcie_reg_rn_88xx(struct halmac_adapter *adapter, u32 offset, u32 size, + u8 *value) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * set_pcie_bulkout_num_88xx() - inform bulk-out num + * @adapter : the adapter of halmac + * @num : usb bulk-out number + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +set_pcie_bulkout_num_88xx(struct halmac_adapter *adapter, u8 num) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * get_pcie_tx_addr_88xx() - get CMD53 addr for the TX packet + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size + * @cmd53_addr : cmd53 addr value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +get_pcie_tx_addr_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u32 *cmd53_addr) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * get_pcie_bulkout_id_88xx() - get bulk out id for the TX packet + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size + * @id : usb bulk-out id + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +get_pcie_bulkout_id_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u8 *id) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +enum halmac_ret_status +mdio_write_88xx(struct halmac_adapter *adapter, u8 addr, u16 data, u8 speed) +{ + u8 tmp_u1b = 0; + u32 cnt = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + u8 real_addr = 0; + + HALMAC_REG_W16(REG_MDIO_V1, data); + + real_addr = (addr & 0x1F); + HALMAC_REG_W8(REG_PCIE_MIX_CFG, real_addr); + + if (speed == HAL_INTF_PHY_PCIE_GEN1) { + if (addr < 0x20) + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x00); + else + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x01); + } else if (speed == HAL_INTF_PHY_PCIE_GEN2) { + if (addr < 0x20) + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x02); + else + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x03); + } else { + pr_err("Error Speed !\n"); + } + + HALMAC_REG_W8_SET(REG_PCIE_MIX_CFG, BIT_MDIO_WFLAG_V1); + + tmp_u1b = HALMAC_REG_R8(REG_PCIE_MIX_CFG) & BIT_MDIO_WFLAG_V1; + cnt = 20; + + while (tmp_u1b && (cnt != 0)) { + usleep_range(10, 20); + tmp_u1b = HALMAC_REG_R8(REG_PCIE_MIX_CFG) & BIT_MDIO_WFLAG_V1; + cnt--; + } + + if (tmp_u1b) { + pr_err("MDIO write fail!\n"); + return HALMAC_RET_FAIL; + } + + return HALMAC_RET_SUCCESS; +} + +u16 +mdio_read_88xx(struct halmac_adapter *adapter, u8 addr, u8 speed) +{ + u16 ret = 0; + u8 tmp_u1b = 0; + u32 cnt = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + u8 real_addr = 0; + + real_addr = (addr & 0x1F); + HALMAC_REG_W8(REG_PCIE_MIX_CFG, real_addr); + + if (speed == HAL_INTF_PHY_PCIE_GEN1) { + if (addr < 0x20) + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x00); + else + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x01); + } else if (speed == HAL_INTF_PHY_PCIE_GEN2) { + if (addr < 0x20) + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x02); + else + HALMAC_REG_W8(REG_PCIE_MIX_CFG + 3, 0x03); + } else { + pr_err("Error Speed !\n"); + } + + HALMAC_REG_W8_SET(REG_PCIE_MIX_CFG, BIT_MDIO_RFLAG_V1); + + tmp_u1b = HALMAC_REG_R8(REG_PCIE_MIX_CFG) & BIT_MDIO_RFLAG_V1; + cnt = 20; + while (tmp_u1b && (cnt != 0)) { + usleep_range(10, 20); + tmp_u1b = HALMAC_REG_R8(REG_PCIE_MIX_CFG) & BIT_MDIO_RFLAG_V1; + cnt--; + } + + if (tmp_u1b) { + ret = 0xFFFF; + pr_err("MDIO read fail!\n"); + } else { + ret = HALMAC_REG_R16(REG_MDIO_V1 + 2); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "Value-R = %x\n", ret); + } + + return ret; +} + +enum halmac_ret_status +dbi_w32_88xx(struct halmac_adapter *adapter, u16 addr, u32 data) +{ + u8 tmp_u1b = 0; + u32 cnt = 0; + u16 write_addr = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + HALMAC_REG_W32(REG_DBI_WDATA_V1, data); + + write_addr = ((addr & 0x0ffc) | (0x000F << 12)); + HALMAC_REG_W16(REG_DBI_FLAG_V1, write_addr); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "Addr-W = %x\n", + write_addr); + + HALMAC_REG_W8(REG_DBI_FLAG_V1 + 2, 0x01); + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + + cnt = 20; + while (tmp_u1b && (cnt != 0)) { + usleep_range(10, 20); + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + cnt--; + } + + if (tmp_u1b) { + pr_err("DBI write fail!\n"); + return HALMAC_RET_FAIL; + } + + return HALMAC_RET_SUCCESS; +} + +u32 +dbi_r32_88xx(struct halmac_adapter *adapter, u16 addr) +{ + u16 read_addr = addr & 0x0ffc; + u8 tmp_u1b = 0; + u32 cnt = 0; + u32 ret = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + HALMAC_REG_W16(REG_DBI_FLAG_V1, read_addr); + + HALMAC_REG_W8(REG_DBI_FLAG_V1 + 2, 0x2); + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + + cnt = 20; + while (tmp_u1b && (cnt != 0)) { + usleep_range(10, 20); + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + cnt--; + } + + if (tmp_u1b) { + ret = 0xFFFF; + pr_err("DBI read fail!\n"); + } else { + ret = HALMAC_REG_R32(REG_DBI_RDATA_V1); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "Value-R = %x\n", ret); + } + + return ret; +} + +enum halmac_ret_status +dbi_w8_88xx(struct halmac_adapter *adapter, u16 addr, u8 data) +{ + u8 tmp_u1b = 0; + u32 cnt = 0; + u16 write_addr = 0; + u16 remainder = addr & (4 - 1); + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + HALMAC_REG_W8(REG_DBI_WDATA_V1 + remainder, data); + + write_addr = ((addr & 0x0ffc) | (BIT(0) << (remainder + 12))); + + HALMAC_REG_W16(REG_DBI_FLAG_V1, write_addr); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "Addr-W = %x\n", + write_addr); + + HALMAC_REG_W8(REG_DBI_FLAG_V1 + 2, 0x01); + + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + + cnt = 20; + while (tmp_u1b && (cnt != 0)) { + usleep_range(10, 20); + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + cnt--; + } + + if (tmp_u1b) { + pr_err("DBI write fail!\n"); + return HALMAC_RET_FAIL; + } + + return HALMAC_RET_SUCCESS; +} + +u8 +dbi_r8_88xx(struct halmac_adapter *adapter, u16 addr) +{ + u16 read_addr = addr & 0x0ffc; + u8 tmp_u1b = 0; + u32 cnt = 0; + u8 ret = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + HALMAC_REG_W16(REG_DBI_FLAG_V1, read_addr); + HALMAC_REG_W8(REG_DBI_FLAG_V1 + 2, 0x2); + + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + + cnt = 20; + while (tmp_u1b && (cnt != 0)) { + usleep_range(10, 20); + tmp_u1b = HALMAC_REG_R8(REG_DBI_FLAG_V1 + 2); + cnt--; + } + + if (tmp_u1b) { + ret = 0xFF; + pr_err("DBI read fail!\n"); + } else { + ret = HALMAC_REG_R8(REG_DBI_RDATA_V1 + (addr & (4 - 1))); + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "Value-R = %x\n", ret); + } + + return ret; +} + +enum halmac_ret_status +trxdma_check_idle_88xx(struct halmac_adapter *adapter) +{ + u32 cnt = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + /* Stop Tx & Rx DMA */ + HALMAC_REG_W32_SET(REG_RXPKT_NUM, BIT(18)); + HALMAC_REG_W16_SET(REG_PCIE_CTRL, ~(BIT(15) | BIT(8))); + + /* Stop FW */ + HALMAC_REG_W16_CLR(REG_SYS_FUNC_EN, BIT(10)); + + /* Check Tx DMA is idle */ + cnt = 20; + while ((HALMAC_REG_R8(REG_SYS_CFG5) & BIT(2)) == BIT(2)) { + usleep_range(10, 20); + cnt--; + if (cnt == 0) { + pr_err("Chk tx idle\n"); + return HALMAC_RET_POWER_OFF_FAIL; + } + } + + /* Check Rx DMA is idle */ + cnt = 20; + while ((HALMAC_REG_R32(REG_RXPKT_NUM) & BIT(17)) != BIT(17)) { + usleep_range(10, 20); + cnt--; + if (cnt == 0) { + pr_err("Chk rx idle\n"); + return HALMAC_RET_POWER_OFF_FAIL; + } + } + + return HALMAC_RET_SUCCESS; +} + +void +en_ref_autok_88xx(struct halmac_adapter *adapter, u8 en) +{ + if (en == 1) + adapter->pcie_refautok_en = 1; + else + adapter->pcie_refautok_en = 0; +} diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.h new file mode 100644 index 000000000000..3c9bc50a327f --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_pcie_88xx.h @@ -0,0 +1,98 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef _HALMAC_PCIE_88XX_H_ +#define _HALMAC_PCIE_88XX_H_ + +#include "../halmac_api.h" + +enum halmac_ret_status +init_pcie_cfg_88xx(struct halmac_adapter *adapter); + +enum halmac_ret_status +deinit_pcie_cfg_88xx(struct halmac_adapter *adapter); + +enum halmac_ret_status +cfg_pcie_rx_agg_88xx(struct halmac_adapter *adapter, + struct halmac_rxagg_cfg *cfg); + +u8 +reg_r8_pcie_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w8_pcie_88xx(struct halmac_adapter *adapter, u32 offset, u8 value); + +u16 +reg_r16_pcie_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w16_pcie_88xx(struct halmac_adapter *adapter, u32 offset, u16 value); + +u32 +reg_r32_pcie_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w32_pcie_88xx(struct halmac_adapter *adapter, u32 offset, u32 value); + +enum halmac_ret_status +cfg_txagg_pcie_align_88xx(struct halmac_adapter *adapter, u8 enable, + u16 align_size); + +enum halmac_ret_status +tx_allowed_pcie_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size); + +u32 +pcie_indirect_reg_r32_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +pcie_reg_rn_88xx(struct halmac_adapter *adapter, u32 offset, u32 size, + u8 *value); + +enum halmac_ret_status +set_pcie_bulkout_num_88xx(struct halmac_adapter *adapter, u8 num); + +enum halmac_ret_status +get_pcie_tx_addr_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u32 *cmd53_addr); + +enum halmac_ret_status +get_pcie_bulkout_id_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u8 *id); + +enum halmac_ret_status +mdio_write_88xx(struct halmac_adapter *adapter, u8 addr, u16 data, u8 speed); + +u16 +mdio_read_88xx(struct halmac_adapter *adapter, u8 addr, u8 speed); + +enum halmac_ret_status +dbi_w32_88xx(struct halmac_adapter *adapter, u16 addr, u32 data); + +u32 +dbi_r32_88xx(struct halmac_adapter *adapter, u16 addr); + +enum halmac_ret_status +dbi_w8_88xx(struct halmac_adapter *adapter, u16 addr, u8 data); + +u8 +dbi_r8_88xx(struct halmac_adapter *adapter, u16 addr); + +enum halmac_ret_status +trxdma_check_idle_88xx(struct halmac_adapter *adapter); + +void +en_ref_autok_88xx(struct halmac_adapter *dapter, u8 en); + +#endif/* _HALMAC_PCIE_88XX_H_ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.c new file mode 100644 index 000000000000..97a3112e63c6 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.c @@ -0,0 +1,895 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "halmac_sdio_88xx.h" +#include "halmac_88xx_cfg.h" + +/* define the SDIO Bus CLK threshold */ +/* for avoiding CMD53 fails that result from SDIO CLK sync to ana_clk fail */ +#define SDIO_CLK_HIGH_SPEED_TH 50 /* 50MHz */ +#define SDIO_CLK_SPEED_MAX 208 /* 208MHz */ + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u8 +r_indir_cmd52_88xx(struct halmac_adapter *adapter, u32 offset); + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r_indir_cmd53_88xx(struct halmac_adapter *adapter, u32 offset); + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r8_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr); + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r16_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr); + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r32_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr); + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w_indir_cmd52_88xx(struct halmac_adapter *adapter, u32 adr, u32 val, + enum halmac_io_size size); + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w_indir_cmd53_88xx(struct halmac_adapter *adapter, u32 adr, u32 val, + enum halmac_io_size size); + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w8_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val); + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w16_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val); + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w32_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val); + +/** + * init_sdio_cfg_88xx() - init SDIO + * @adapter : the adapter of halmac + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +init_sdio_cfg_88xx(struct halmac_adapter *adapter) +{ + u32 value32; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + if (adapter->intf != HALMAC_INTERFACE_SDIO) + return HALMAC_RET_WRONG_INTF; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + HALMAC_REG_R32(REG_SDIO_FREE_TXPG); + + value32 = HALMAC_REG_R32(REG_SDIO_TX_CTRL) & 0xFFFF; + value32 &= ~(BIT_CMD_ERR_STOP_INT_EN | BIT_EN_MASK_TIMER | + BIT_EN_RXDMA_MASK_INT); + HALMAC_REG_W32(REG_SDIO_TX_CTRL, value32); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * deinit_sdio_cfg_88xx() - deinit SDIO + * @adapter : the adapter of halmac + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +deinit_sdio_cfg_88xx(struct halmac_adapter *adapter) +{ + if (adapter->intf != HALMAC_INTERFACE_SDIO) + return HALMAC_RET_WRONG_INTF; + + return HALMAC_RET_SUCCESS; +} + +/** + * cfg_sdio_rx_agg_88xx() - config rx aggregation + * @adapter : the adapter of halmac + * @halmac_rx_agg_mode + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +cfg_sdio_rx_agg_88xx(struct halmac_adapter *adapter, + struct halmac_rxagg_cfg *cfg) +{ + u8 value8; + u8 size; + u8 timeout; + u8 agg_enable; + u32 value32; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + agg_enable = HALMAC_REG_R8(REG_TXDMA_PQ_MAP); + + switch (cfg->mode) { + case HALMAC_RX_AGG_MODE_NONE: + agg_enable &= ~(BIT_RXDMA_AGG_EN); + break; + case HALMAC_RX_AGG_MODE_DMA: + case HALMAC_RX_AGG_MODE_USB: + agg_enable |= BIT_RXDMA_AGG_EN; + break; + default: + pr_err("unsupported mode\n"); + agg_enable &= ~BIT_RXDMA_AGG_EN; + break; + } + + if (cfg->threshold.drv_define == 0) { + size = 0xFF; + timeout = 0x01; + } else { + size = cfg->threshold.size; + timeout = cfg->threshold.timeout; + } + + value32 = HALMAC_REG_R32(REG_RXDMA_AGG_PG_TH); + if (cfg->threshold.size_limit_en == 0) + HALMAC_REG_W32(REG_RXDMA_AGG_PG_TH, value32 & ~BIT_EN_PRE_CALC); + else + HALMAC_REG_W32(REG_RXDMA_AGG_PG_TH, value32 | BIT_EN_PRE_CALC); + + HALMAC_REG_W8(REG_TXDMA_PQ_MAP, agg_enable); + HALMAC_REG_W16(REG_RXDMA_AGG_PG_TH, + (u16)(size | (timeout << BIT_SHIFT_DMA_AGG_TO_V1))); + + value8 = HALMAC_REG_R8(REG_RXDMA_MODE); + if (0 != (agg_enable & BIT_RXDMA_AGG_EN)) + HALMAC_REG_W8(REG_RXDMA_MODE, value8 | BIT_DMA_MODE); + else + HALMAC_REG_W8(REG_RXDMA_MODE, value8 & ~(BIT_DMA_MODE)); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * sdio_reg_rn_88xx() - read n byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @halmac_size : register value size + * @value : register value + * Author : Soar + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +sdio_reg_rn_88xx(struct halmac_adapter *adapter, u32 offset, u32 size, + u8 *value) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if (0 == (offset & 0xFFFF0000)) { + pr_err("offset 0x%x\n", offset); + return HALMAC_RET_FAIL; + } + + status = cnv_to_sdio_bus_offset_88xx(adapter, &offset); + if (status != HALMAC_RET_SUCCESS) { + pr_err("convert offset\n"); + return status; + } + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) { + pr_err("power off\n"); + return HALMAC_RET_FAIL; + } + + PLTFM_SDIO_CMD53_RN(offset, size, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * cfg_txagg_sdio_align_88xx() -config sdio bus tx agg alignment + * @adapter : the adapter of halmac + * @enable : function enable(1)/disable(0) + * @align_size : sdio bus tx agg alignment size (2^n, n = 3~11) + * Author : Soar Tu + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +cfg_txagg_sdio_align_88xx(struct halmac_adapter *adapter, u8 enable, + u16 align_size) +{ + u8 i; + u8 flag = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (adapter->chip_id == HALMAC_CHIP_ID_8822B) + return HALMAC_RET_NOT_SUPPORT; + + if ((align_size & 0xF000) != 0) { + pr_err("out of range\n"); + return HALMAC_RET_FAIL; + } + + for (i = 3; i <= 11; i++) { + if (align_size == 1 << i) { + flag = 1; + break; + } + } + + if (flag == 0) { + pr_err("not 2^3 ~ 2^11\n"); + return HALMAC_RET_FAIL; + } + + adapter->hw_cfg_info.tx_align_size = align_size; + + if (enable) + HALMAC_REG_W16(REG_RQPN_CTRL_2, 0x8000 | align_size); + else + HALMAC_REG_W16(REG_RQPN_CTRL_2, align_size); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * sdio_indirect_reg_r32_88xx() - read MAC reg by SDIO reg + * @adapter : the adapter of halmac + * @offset : register offset + * Author : Soar + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u32 +sdio_indirect_reg_r32_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return r_indir_sdio_88xx(adapter, offset, HALMAC_IO_DWORD); +} + +/** + * set_sdio_bulkout_num_88xx() - inform bulk-out num + * @adapter : the adapter of halmac + * @bulkout_num : usb bulk-out number + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +set_sdio_bulkout_num_88xx(struct halmac_adapter *adapter, u8 num) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * get_sdio_bulkout_id_88xx() - get bulk out id for the TX packet + * @adapter : the adapter of halmac + * @halmac_buf : tx packet, include txdesc + * @halmac_size : tx packet size + * @bulkout_id : usb bulk-out id + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +get_sdio_bulkout_id_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u8 *id) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * sdio_cmd53_4byte_88xx() - cmd53 only for 4byte len register IO + * @adapter : the adapter of halmac + * @enable : 1->CMD53 only use in 4byte reg, 0 : No limitation + * Author : Ivan Lin/KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +sdio_cmd53_4byte_88xx(struct halmac_adapter *adapter, + enum halmac_sdio_cmd53_4byte_mode mode) +{ + if (adapter->intf != HALMAC_INTERFACE_SDIO) + return HALMAC_RET_WRONG_INTF; + + if (adapter->api_registry.sdio_cmd53_4byte_en == 0) + return HALMAC_RET_NOT_SUPPORT; + + adapter->sdio_cmd53_4byte = mode; + + return HALMAC_RET_SUCCESS; +} + +/** + * sdio_hw_info_88xx() - info sdio hw info + * @adapter : the adapter of halmac + * @HALMAC_SDIO_CMD53_4BYTE_MODE : + * clock_speed : sdio bus clock. Unit -> MHz + * spec_ver : sdio spec version + * Author : Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +sdio_hw_info_88xx(struct halmac_adapter *adapter, + struct halmac_sdio_hw_info *info) +{ + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (adapter->intf != HALMAC_INTERFACE_SDIO) + return HALMAC_RET_WRONG_INTF; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "SDIO clock:%d, spec:%d\n", info->clock_speed, info->spec_ver); + + if (info->clock_speed > SDIO_CLK_SPEED_MAX) + return HALMAC_RET_SDIO_CLOCK_ERR; + + if (info->clock_speed > SDIO_CLK_HIGH_SPEED_TH) + adapter->sdio_hw_info.io_hi_speed_flag = 1; + + adapter->sdio_hw_info.io_indir_flag = info->io_indir_flag; + if (info->clock_speed > SDIO_CLK_HIGH_SPEED_TH && + adapter->sdio_hw_info.io_indir_flag == 0) + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_WARNING, + "SDIO clock:%d, indir access is better\n", + info->clock_speed); + + adapter->sdio_hw_info.clock_speed = info->clock_speed; + adapter->sdio_hw_info.spec_ver = info->spec_ver; + adapter->sdio_hw_info.block_size = info->block_size; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +void +cfg_sdio_tx_page_threshold_88xx(struct halmac_adapter *adapter, + struct halmac_tx_page_threshold_info *info) +{ + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + u32 threshold = info->threshold; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (info->enable == 1) { + threshold = BIT(31) | threshold; + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "enable\n"); + } else { + threshold = ~(BIT(31)) & threshold; + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, + "disable\n"); + } + + switch (info->dma_queue_sel) { + case HALMAC_MAP2_HQ: + HALMAC_REG_W32(REG_TQPNT1, threshold); + break; + case HALMAC_MAP2_NQ: + HALMAC_REG_W32(REG_TQPNT2, threshold); + break; + case HALMAC_MAP2_LQ: + HALMAC_REG_W32(REG_TQPNT3, threshold); + break; + case HALMAC_MAP2_EXQ: + HALMAC_REG_W32(REG_TQPNT4, threshold); + break; + default: + break; + } + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); +} + +enum halmac_ret_status +cnv_to_sdio_bus_offset_88xx(struct halmac_adapter *adapter, u32 *offset) +{ + switch ((*offset) & 0xFFFF0000) { + case WLAN_IOREG_OFFSET: + *offset &= HALMAC_WLAN_MAC_REG_MSK; + *offset |= HALMAC_SDIO_CMD_ADDR_MAC_REG << 13; + break; + case SDIO_LOCAL_OFFSET: + *offset &= HALMAC_SDIO_LOCAL_MSK; + *offset |= HALMAC_SDIO_CMD_ADDR_SDIO_REG << 13; + break; + default: + *offset = 0xFFFFFFFF; + pr_err("base address!!\n"); + return HALMAC_RET_CONVERT_SDIO_OFFSET_FAIL; + } + + return HALMAC_RET_SUCCESS; +} + +enum halmac_ret_status +leave_sdio_suspend_88xx(struct halmac_adapter *adapter) +{ + u8 value8; + u32 cnt; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + value8 = HALMAC_REG_R8(REG_SDIO_HSUS_CTRL); + HALMAC_REG_W8(REG_SDIO_HSUS_CTRL, value8 & ~(BIT(0))); + + cnt = 10000; + while (!(HALMAC_REG_R8(REG_SDIO_HSUS_CTRL) & 0x02)) { + cnt--; + if (cnt == 0) + return HALMAC_RET_SDIO_LEAVE_SUSPEND_FAIL; + } + + value8 = HALMAC_REG_R8(REG_HCI_OPT_CTRL + 2); + if (adapter->sdio_hw_info.spec_ver == HALMAC_SDIO_SPEC_VER_3_00) + HALMAC_REG_W8(REG_HCI_OPT_CTRL + 2, value8 | BIT(2)); + else + HALMAC_REG_W8(REG_HCI_OPT_CTRL + 2, value8 & ~(BIT(2))); + + return HALMAC_RET_SUCCESS; +} + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u8 +r_indir_cmd52_88xx(struct halmac_adapter *adapter, u32 offset) +{ + u8 value8, tmp, cnt = 50; + u32 reg_cfg = REG_SDIO_INDIRECT_REG_CFG; + u32 reg_data = REG_SDIO_INDIRECT_REG_DATA; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_cfg); + if (status != HALMAC_RET_SUCCESS) + return status; + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_data); + if (status != HALMAC_RET_SUCCESS) + return status; + + PLTFM_SDIO_CMD52_W(reg_cfg, (u8)offset); + PLTFM_SDIO_CMD52_W(reg_cfg + 1, (u8)(offset >> 8)); + PLTFM_SDIO_CMD52_W(reg_cfg + 2, (u8)(BIT(3) | BIT(4))); + + do { + tmp = PLTFM_SDIO_CMD52_R(reg_cfg + 2); + cnt--; + } while (((tmp & BIT(4)) == 0) && (cnt > 0)); + + if (((cnt & BIT(4)) == 0) && cnt == 0) + pr_err("sdio indirect CMD52 read\n"); + + value8 = PLTFM_SDIO_CMD52_R(reg_data); + + return value8; +} + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r_indir_cmd53_88xx(struct halmac_adapter *adapter, u32 offset) +{ + u8 cnt = 50; + u8 value[6]; + u32 reg_cfg = REG_SDIO_INDIRECT_REG_CFG; + u32 reg_data = REG_SDIO_INDIRECT_REG_DATA; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + union { + __le32 dword; + u8 byte[4]; + } value32 = { 0x00000000 }; + + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_cfg); + if (status != HALMAC_RET_SUCCESS) + return status; + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_data); + if (status != HALMAC_RET_SUCCESS) + return status; + + PLTFM_SDIO_CMD53_W32(reg_cfg, offset | BIT(19) | BIT(20)); + + do { + PLTFM_SDIO_CMD53_RN(reg_cfg + 2, sizeof(value), value); + cnt--; + } while (((value[0] & BIT(4)) == 0) && (cnt > 0)); + + if (((cnt & BIT(4)) == 0) && cnt == 0) + pr_err("sdio indirect CMD53 read\n"); + + value32.byte[0] = value[2]; + value32.byte[1] = value[3]; + value32.byte[2] = value[4]; + value32.byte[3] = value[5]; + + return le32_to_cpu(value32.dword); +} + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r8_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr) +{ + union { + __le32 dword; + u8 byte[4]; + } val = { 0x00000000 }; + + if (adapter->pwr_off_flow_flag == 1 || + adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) { + val.byte[0] = r_indir_cmd52_88xx(adapter, adr); + return le32_to_cpu(val.dword); + } + + return r_indir_cmd53_88xx(adapter, adr); +} + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r16_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr) +{ + u32 reg_data = REG_SDIO_INDIRECT_REG_DATA; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + union { + __le32 dword; + u8 byte[4]; + } val = { 0x00000000 }; + + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_data); + if (status != HALMAC_RET_SUCCESS) + return status; + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) { + if (0 != (adr & (2 - 1))) { + val.byte[0] = r_indir_cmd52_88xx(adapter, adr); + val.byte[1] = r_indir_cmd52_88xx(adapter, adr + 1); + } else { + val.byte[0] = r_indir_cmd52_88xx(adapter, adr); + val.byte[1] = PLTFM_SDIO_CMD52_R(reg_data + 1); + } + + return le32_to_cpu(val.dword); + } + + if (0 != (adr & (2 - 1))) { + val.byte[0] = (u8)r_indir_cmd53_88xx(adapter, adr); + val.byte[1] = (u8)r_indir_cmd53_88xx(adapter, adr + 1); + + return le32_to_cpu(val.dword); + } + + return r_indir_cmd53_88xx(adapter, adr); +} + +/*only for r_indir_sdio_88xx !!, Soar 20171222*/ +static u32 +r32_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr) +{ + u32 reg_data = REG_SDIO_INDIRECT_REG_DATA; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + union { + __le32 dword; + u8 byte[4]; + } val = { 0x00000000 }; + + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_data); + if (status != HALMAC_RET_SUCCESS) + return status; + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) { + if (0 != (adr & (4 - 1))) { + val.byte[0] = r_indir_cmd52_88xx(adapter, adr); + val.byte[1] = r_indir_cmd52_88xx(adapter, adr + 1); + val.byte[2] = r_indir_cmd52_88xx(adapter, adr + 2); + val.byte[3] = r_indir_cmd52_88xx(adapter, adr + 3); + } else { + val.byte[0] = r_indir_cmd52_88xx(adapter, adr); + val.byte[1] = PLTFM_SDIO_CMD52_R(reg_data + 1); + val.byte[2] = PLTFM_SDIO_CMD52_R(reg_data + 2); + val.byte[3] = PLTFM_SDIO_CMD52_R(reg_data + 3); + } + + return le32_to_cpu(val.dword); + } + + if (0 != (adr & (4 - 1))) { + val.byte[0] = (u8)r_indir_cmd53_88xx(adapter, adr); + val.byte[1] = (u8)r_indir_cmd53_88xx(adapter, adr + 1); + val.byte[2] = (u8)r_indir_cmd53_88xx(adapter, adr + 2); + val.byte[3] = (u8)r_indir_cmd53_88xx(adapter, adr + 3); + + return le32_to_cpu(val.dword); + } + + return r_indir_cmd53_88xx(adapter, adr); +} + +u32 +r_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, + enum halmac_io_size size) +{ + u32 value32 = 0; + + mutex_lock(&adapter->sdio_indir_mutex); + + switch (size) { + case HALMAC_IO_BYTE: + value32 = r8_indir_sdio_88xx(adapter, adr); + break; + case HALMAC_IO_WORD: + value32 = r16_indir_sdio_88xx(adapter, adr); + break; + case HALMAC_IO_DWORD: + value32 = r32_indir_sdio_88xx(adapter, adr); + break; + default: + break; + } + + mutex_unlock(&adapter->sdio_indir_mutex); + + return value32; +} + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w_indir_cmd52_88xx(struct halmac_adapter *adapter, u32 adr, u32 val, + enum halmac_io_size size) +{ + u8 tmp, cnt = 50; + u32 reg_cfg = REG_SDIO_INDIRECT_REG_CFG; + u32 reg_data = REG_SDIO_INDIRECT_REG_DATA; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_cfg); + if (status != HALMAC_RET_SUCCESS) + return status; + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_data); + if (status != HALMAC_RET_SUCCESS) + return status; + + PLTFM_SDIO_CMD52_W(reg_cfg, (u8)adr); + PLTFM_SDIO_CMD52_W(reg_cfg + 1, (u8)(adr >> 8)); + switch (size) { + case HALMAC_IO_BYTE: + PLTFM_SDIO_CMD52_W(reg_data, (u8)val); + PLTFM_SDIO_CMD52_W(reg_cfg + 2, (u8)(BIT(2) | BIT(4))); + break; + case HALMAC_IO_WORD: + PLTFM_SDIO_CMD52_W(reg_data, (u8)val); + PLTFM_SDIO_CMD52_W(reg_data + 1, (u8)(val >> 8)); + PLTFM_SDIO_CMD52_W(reg_cfg + 2, + (u8)(BIT(0) | BIT(2) | BIT(4))); + break; + case HALMAC_IO_DWORD: + PLTFM_SDIO_CMD52_W(reg_data, (u8)val); + PLTFM_SDIO_CMD52_W(reg_data + 1, (u8)(val >> 8)); + PLTFM_SDIO_CMD52_W(reg_data + 2, (u8)(val >> 16)); + PLTFM_SDIO_CMD52_W(reg_data + 3, (u8)(val >> 24)); + PLTFM_SDIO_CMD52_W(reg_cfg + 2, + (u8)(BIT(1) | BIT(2) | BIT(4))); + break; + default: + break; + } + + do { + tmp = PLTFM_SDIO_CMD52_R(reg_cfg + 2); + cnt--; + } while (((tmp & BIT(4)) == 0) && (cnt > 0)); + + if (((cnt & BIT(4)) == 0) && cnt == 0) + pr_err("sdio indirect CMD52 write\n"); + + return status; +} + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w_indir_cmd53_88xx(struct halmac_adapter *adapter, u32 adr, u32 val, + enum halmac_io_size size) +{ + u8 tmp, cnt = 50; + u32 reg_cfg = REG_SDIO_INDIRECT_REG_CFG; + u32 reg_data = REG_SDIO_INDIRECT_REG_DATA; + u32 value32 = 0; + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_cfg); + if (status != HALMAC_RET_SUCCESS) + return status; + status = cnv_to_sdio_bus_offset_88xx(adapter, ®_data); + if (status != HALMAC_RET_SUCCESS) + return status; + + switch (size) { + case HALMAC_IO_BYTE: + value32 = adr | BIT(18) | BIT(20); + break; + case HALMAC_IO_WORD: + value32 = adr | BIT(16) | BIT(18) | BIT(20); + break; + case HALMAC_IO_DWORD: + value32 = adr | BIT(17) | BIT(18) | BIT(20); + break; + default: + return HALMAC_RET_FAIL; + } + + PLTFM_SDIO_CMD53_W32(reg_data, val); + PLTFM_SDIO_CMD53_W32(reg_cfg, value32); + + do { + tmp = PLTFM_SDIO_CMD52_R(reg_cfg + 2); + cnt--; + } while (((tmp & BIT(4)) == 0) && (cnt > 0)); + + if (((cnt & BIT(4)) == 0) && cnt == 0) + pr_err("sdio indirect CMD53 read\n"); + + return status; +} + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w8_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if (adapter->pwr_off_flow_flag == 1 || + adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) + status = w_indir_cmd52_88xx(adapter, adr, val, HALMAC_IO_BYTE); + else + status = w_indir_cmd53_88xx(adapter, adr, val, HALMAC_IO_BYTE); + return status; +} + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w16_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) { + if (0 != (adr & (2 - 1))) { + status = w_indir_cmd52_88xx(adapter, adr, val, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd52_88xx(adapter, adr + 1, val >> 8, + HALMAC_IO_BYTE); + } else { + status = w_indir_cmd52_88xx(adapter, adr, val, + HALMAC_IO_WORD); + } + } else { + if (0 != (adr & (2 - 1))) { + status = w_indir_cmd53_88xx(adapter, adr, val, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd53_88xx(adapter, adr + 1, val >> 8, + HALMAC_IO_BYTE); + } else { + status = w_indir_cmd53_88xx(adapter, adr, val, + HALMAC_IO_WORD); + } + } + return status; +} + +/*only for w_indir_sdio_88xx !!, Soar 20171222*/ +static enum halmac_ret_status +w32_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + if (adapter->halmac_state.mac_pwr == HALMAC_MAC_POWER_OFF) { + if (0 != (adr & (4 - 1))) { + status = w_indir_cmd52_88xx(adapter, adr, val, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd52_88xx(adapter, adr + 1, val >> 8, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd52_88xx(adapter, adr + 2, val >> 16, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd52_88xx(adapter, adr + 3, val >> 24, + HALMAC_IO_BYTE); + } else { + status = w_indir_cmd52_88xx(adapter, adr, val, + HALMAC_IO_DWORD); + } + } else { + if (0 != (adr & (4 - 1))) { + status = w_indir_cmd53_88xx(adapter, adr, val, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd53_88xx(adapter, adr + 1, val >> 8, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd53_88xx(adapter, adr + 2, val >> 16, + HALMAC_IO_BYTE); + if (status != HALMAC_RET_SUCCESS) + return status; + status = w_indir_cmd53_88xx(adapter, adr + 3, val >> 24, + HALMAC_IO_BYTE); + } else { + status = w_indir_cmd53_88xx(adapter, adr, val, + HALMAC_IO_DWORD); + } + } + return status; +} + +enum halmac_ret_status +w_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val, + enum halmac_io_size size) +{ + enum halmac_ret_status status = HALMAC_RET_SUCCESS; + + mutex_lock(&adapter->sdio_indir_mutex); + + switch (size) { + case HALMAC_IO_BYTE: + status = w8_indir_sdio_88xx(adapter, adr, val); + break; + case HALMAC_IO_WORD: + status = w16_indir_sdio_88xx(adapter, adr, val); + break; + case HALMAC_IO_DWORD: + status = w32_indir_sdio_88xx(adapter, adr, val); + break; + default: + break; + } + + mutex_unlock(&adapter->sdio_indir_mutex); + + return status; +} diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.h new file mode 100644 index 000000000000..d16c80902486 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_sdio_88xx.h @@ -0,0 +1,75 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef _HALMAC_SDIO_88XX_H_ +#define _HALMAC_SDIO_88XX_H_ + +#include "../halmac_api.h" + +enum halmac_ret_status +init_sdio_cfg_88xx(struct halmac_adapter *adapter); + +enum halmac_ret_status +deinit_sdio_cfg_88xx(struct halmac_adapter *adapter); + +enum halmac_ret_status +cfg_sdio_rx_agg_88xx(struct halmac_adapter *adapter, + struct halmac_rxagg_cfg *cfg); + +enum halmac_ret_status +cfg_txagg_sdio_align_88xx(struct halmac_adapter *adapter, u8 enable, + u16 align_size); + +u32 +sdio_indirect_reg_r32_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +sdio_reg_rn_88xx(struct halmac_adapter *adapter, u32 offset, u32 size, + u8 *value); + +enum halmac_ret_status +set_sdio_bulkout_num_88xx(struct halmac_adapter *adapter, u8 num); + +enum halmac_ret_status +get_sdio_bulkout_id_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u8 *id); + +enum halmac_ret_status +sdio_cmd53_4byte_88xx(struct halmac_adapter *adapter, + enum halmac_sdio_cmd53_4byte_mode mode); + +enum halmac_ret_status +sdio_hw_info_88xx(struct halmac_adapter *adapter, + struct halmac_sdio_hw_info *info); + +void +cfg_sdio_tx_page_threshold_88xx(struct halmac_adapter *adapter, + struct halmac_tx_page_threshold_info *info); + +enum halmac_ret_status +cnv_to_sdio_bus_offset_88xx(struct halmac_adapter *adapter, u32 *offset); + +enum halmac_ret_status +leave_sdio_suspend_88xx(struct halmac_adapter *adapter); + +u32 +r_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, + enum halmac_io_size size); + +enum halmac_ret_status +w_indir_sdio_88xx(struct halmac_adapter *adapter, u32 adr, u32 val, + enum halmac_io_size size); + +#endif/* _HALMAC_SDIO_88XX_H_ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.c b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.c new file mode 100644 index 000000000000..8ab1d31fb227 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.c @@ -0,0 +1,522 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#include "halmac_usb_88xx.h" + +enum usb_burst_size { + USB_BURST_SIZE_3_0 = 0x0, + USB_BURST_SIZE_2_0_HS = 0x1, + USB_BURST_SIZE_2_0_FS = 0x2, + USB_BURST_SIZE_2_0_OTHERS = 0x3, + USB_BURST_SIZE_UNDEFINE = 0x7F, +}; + +/** + * init_usb_cfg_88xx() - init USB + * @adapter : the adapter of halmac + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +init_usb_cfg_88xx(struct halmac_adapter *adapter) +{ + u8 value8 = 0; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + value8 |= (BIT_DMA_MODE | (0x3 << BIT_SHIFT_BURST_CNT)); + + if (HALMAC_REG_R8(REG_SYS_CFG2 + 3) == 0x20) { + /* usb3.0 */ + value8 |= (USB_BURST_SIZE_3_0 << BIT_SHIFT_BURST_SIZE); + } else { + if ((HALMAC_REG_R8(REG_USB_USBSTAT) & 0x3) == 0x1)/* usb2.0 */ + value8 |= USB_BURST_SIZE_2_0_HS << BIT_SHIFT_BURST_SIZE; + else /* usb1.1 */ + value8 |= USB_BURST_SIZE_2_0_FS << BIT_SHIFT_BURST_SIZE; + } + + HALMAC_REG_W8(REG_RXDMA_MODE, value8); + HALMAC_REG_W16_SET(REG_TXDMA_OFFSET_CHK, BIT_DROP_DATA_EN); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * deinit_usb_cfg_88xx() - deinit USB + * @adapter : the adapter of halmac + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +deinit_usb_cfg_88xx(struct halmac_adapter *adapter) +{ + return HALMAC_RET_SUCCESS; +} + +/** + * cfg_usb_rx_agg_88xx() - config rx aggregation + * @adapter : the adapter of halmac + * @halmac_rx_agg_mode + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +cfg_usb_rx_agg_88xx(struct halmac_adapter *adapter, + struct halmac_rxagg_cfg *cfg) +{ + u8 dma_usb_agg; + u8 size; + u8 timeout; + u8 agg_enable; + u32 value32; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + dma_usb_agg = HALMAC_REG_R8(REG_RXDMA_AGG_PG_TH + 3); + agg_enable = HALMAC_REG_R8(REG_TXDMA_PQ_MAP); + + switch (cfg->mode) { + case HALMAC_RX_AGG_MODE_NONE: + agg_enable &= ~BIT_RXDMA_AGG_EN; + break; + case HALMAC_RX_AGG_MODE_DMA: + agg_enable |= BIT_RXDMA_AGG_EN; + dma_usb_agg |= BIT(7); + break; + + case HALMAC_RX_AGG_MODE_USB: + agg_enable |= BIT_RXDMA_AGG_EN; + dma_usb_agg &= ~BIT(7); + break; + default: + pr_err("unsupported mode\n"); + agg_enable &= ~BIT_RXDMA_AGG_EN; + break; + } + + if (cfg->threshold.drv_define == 0) { + if (HALMAC_REG_R8(REG_SYS_CFG2 + 3) == 0x20) { + /* usb3.0 */ + size = 0x5; + timeout = 0xA; + } else { + /* usb2.0 */ + size = 0x5; + timeout = 0x20; + } + } else { + size = cfg->threshold.size; + timeout = cfg->threshold.timeout; + } + + value32 = HALMAC_REG_R32(REG_RXDMA_AGG_PG_TH); + if (cfg->threshold.size_limit_en == 0) + HALMAC_REG_W32(REG_RXDMA_AGG_PG_TH, value32 & ~BIT_EN_PRE_CALC); + else + HALMAC_REG_W32(REG_RXDMA_AGG_PG_TH, value32 | BIT_EN_PRE_CALC); + + HALMAC_REG_W8(REG_TXDMA_PQ_MAP, agg_enable); + HALMAC_REG_W8(REG_RXDMA_AGG_PG_TH + 3, dma_usb_agg); + HALMAC_REG_W16(REG_RXDMA_AGG_PG_TH, + (u16)(size | (timeout << BIT_SHIFT_DMA_AGG_TO_V1))); + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * reg_r8_usb_88xx() - read 1byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u8 +reg_r8_usb_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return PLTFM_REG_R8(offset); +} + +/** + * reg_w8_usb_88xx() - write 1byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w8_usb_88xx(struct halmac_adapter *adapter, u32 offset, u8 value) +{ + PLTFM_REG_W8(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * reg_r16_usb_88xx() - read 2byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u16 +reg_r16_usb_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return PLTFM_REG_R16(offset); +} + +/** + * reg_w16_usb_88xx() - write 2byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w16_usb_88xx(struct halmac_adapter *adapter, u32 offset, u16 value) +{ + PLTFM_REG_W16(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * reg_r32_usb_88xx() - read 4byte register + * @adapter : the adapter of halmac + * @offset : register offset + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u32 +reg_r32_usb_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return PLTFM_REG_R32(offset); +} + +/** + * reg_w32_usb_88xx() - write 4byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @value : register value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +reg_w32_usb_88xx(struct halmac_adapter *adapter, u32 offset, u32 value) +{ + PLTFM_REG_W32(offset, value); + + return HALMAC_RET_SUCCESS; +} + +/** + * set_usb_bulkout_num_88xx() - inform bulk-out num + * @adapter : the adapter of halmac + * @bulkout_num : usb bulk-out number + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +set_usb_bulkout_num_88xx(struct halmac_adapter *adapter, u8 num) +{ + adapter->bulkout_num = num; + + return HALMAC_RET_SUCCESS; +} + +/** + * get_usb_bulkout_id_88xx() - get bulk out id for the TX packet + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size + * @id : usb bulk-out id + * Author : KaiYuan Chang + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +get_usb_bulkout_id_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u8 *id) +{ + enum halmac_qsel queue_sel; + enum halmac_dma_mapping dma_mapping; + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s ===>\n", + __func__); + + if (!buf) { + pr_err("buf is NULL!!\n"); + return HALMAC_RET_DATA_BUF_NULL; + } + + if (size == 0) { + pr_err("size is 0!!\n"); + return HALMAC_RET_DATA_SIZE_INCORRECT; + } + + queue_sel = (enum halmac_qsel)GET_TX_DESC_QSEL(buf); + + switch (queue_sel) { + case HALMAC_QSEL_VO: + case HALMAC_QSEL_VO_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_VO]; + break; + case HALMAC_QSEL_VI: + case HALMAC_QSEL_VI_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_VI]; + break; + case HALMAC_QSEL_BE: + case HALMAC_QSEL_BE_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_BE]; + break; + case HALMAC_QSEL_BK: + case HALMAC_QSEL_BK_V2: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_BK]; + break; + case HALMAC_QSEL_MGNT: + dma_mapping = adapter->pq_map[HALMAC_PQ_MAP_MG]; + break; + case HALMAC_QSEL_HIGH: + case HALMAC_QSEL_BCN: + case HALMAC_QSEL_CMD: + dma_mapping = HALMAC_DMA_MAPPING_HIGH; + break; + default: + pr_err("Qsel is out of range\n"); + return HALMAC_RET_QSEL_INCORRECT; + } + + switch (dma_mapping) { + case HALMAC_DMA_MAPPING_HIGH: + *id = 0; + break; + case HALMAC_DMA_MAPPING_NORMAL: + *id = 1; + break; + case HALMAC_DMA_MAPPING_LOW: + *id = 2; + break; + case HALMAC_DMA_MAPPING_EXTRA: + *id = 3; + break; + default: + pr_err("out of range\n"); + return HALMAC_RET_DMA_MAP_INCORRECT; + } + + RT_TRACE(adapter->drv_adapter, COMP_HALMAC, DBG_DMESG, "%s <===\n", + __func__); + + return HALMAC_RET_SUCCESS; +} + +/** + * cfg_txagg_usb_align_88xx() -config sdio bus tx agg alignment + * @adapter : the adapter of halmac + * @enable : function enable(1)/disable(0) + * @align_size : sdio bus tx agg alignment size (2^n, n = 3~11) + * Author : Soar Tu + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +cfg_txagg_usb_align_88xx(struct halmac_adapter *adapter, u8 enable, + u16 align_size) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * tx_allowed_usb_88xx() - check tx status + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size, include txdesc + * Author : Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +tx_allowed_usb_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * usb_indirect_reg_r32_88xx() - read MAC reg by SDIO reg + * @adapter : the adapter of halmac + * @offset : register offset + * Author : Soar + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +u32 +usb_indirect_reg_r32_88xx(struct halmac_adapter *adapter, u32 offset) +{ + return 0xFFFFFFFF; +} + +/** + * usb_reg_rn_88xx() - read n byte register + * @adapter : the adapter of halmac + * @offset : register offset + * @size : register value size + * @value : register value + * Author : Soar + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +usb_reg_rn_88xx(struct halmac_adapter *adapter, u32 offset, u32 size, + u8 *value) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +/** + * get_usb_tx_addr_88xx() - get CMD53 addr for the TX packet + * @adapter : the adapter of halmac + * @buf : tx packet, include txdesc + * @size : tx packet size + * @pcmd53_addr : cmd53 addr value + * Author : KaiYuan Chang/Ivan Lin + * Return : enum halmac_ret_status + * More details of status code can be found in prototype document + */ +enum halmac_ret_status +get_usb_tx_addr_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u32 *cmd53_addr) +{ + return HALMAC_RET_NOT_SUPPORT; +} + +enum halmac_ret_status +set_usb_mode_88xx(struct halmac_adapter *adapter, enum halmac_usb_mode mode) +{ + u32 usb_tmp; + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + enum halmac_usb_mode cur_mode; + + cur_mode = (HALMAC_REG_R8(REG_SYS_CFG2 + 3) == 0x20) ? + HALMAC_USB_MODE_U3 : HALMAC_USB_MODE_U2; + + /* check if HW supports usb2_usb3 switch */ + usb_tmp = HALMAC_REG_R32(REG_PAD_CTRL2); + if (0 == (BIT_GET_USB23_SW_MODE_V1(usb_tmp) | + (usb_tmp & BIT_USB3_USB2_TRANSITION))) { + pr_err("u2/u3 switch\n"); + return HALMAC_RET_USB2_3_SWITCH_UNSUPPORT; + } + + if (mode == cur_mode) { + pr_err("u2/u3 unchange\n"); + return HALMAC_RET_USB_MODE_UNCHANGE; + } + + /* Enable IO wrapper timeout */ + if (adapter->chip_id == HALMAC_CHIP_ID_8822B || + adapter->chip_id == HALMAC_CHIP_ID_8821C) + HALMAC_REG_W8_CLR(REG_SW_MDIO + 3, BIT(0)); + + usb_tmp &= ~(BIT_USB23_SW_MODE_V1(0x3)); + + if (mode == HALMAC_USB_MODE_U2) + HALMAC_REG_W32(REG_PAD_CTRL2, + usb_tmp | + BIT_USB23_SW_MODE_V1(HALMAC_USB_MODE_U2) | + BIT_RSM_EN_V1); + else + HALMAC_REG_W32(REG_PAD_CTRL2, + usb_tmp | + BIT_USB23_SW_MODE_V1(HALMAC_USB_MODE_U3) | + BIT_RSM_EN_V1); + + HALMAC_REG_W8(REG_PAD_CTRL2 + 1, 4); + HALMAC_REG_W16_SET(REG_SYS_PW_CTRL, BIT_APFM_OFFMAC); + usleep_range(1000, 1100); + HALMAC_REG_W32_SET(REG_PAD_CTRL2, BIT_NO_PDN_CHIPOFF_V1); + + return HALMAC_RET_SUCCESS; +} + +enum halmac_ret_status +usbphy_write_88xx(struct halmac_adapter *adapter, u8 addr, u16 data, u8 speed) +{ + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + + if (speed == HAL_INTF_PHY_USB3) { + HALMAC_REG_W8(0xff0d, (u8)data); + HALMAC_REG_W8(0xff0e, (u8)(data >> 8)); + HALMAC_REG_W8(0xff0c, addr | BIT(7)); + } else if (speed == HAL_INTF_PHY_USB2) { + HALMAC_REG_W8(0xfe41, (u8)data); + HALMAC_REG_W8(0xfe40, addr); + HALMAC_REG_W8(0xfe42, 0x81); + } else { + pr_err("Error USB Speed !\n"); + return HALMAC_RET_NOT_SUPPORT; + } + + return HALMAC_RET_SUCCESS; +} + +u16 +usbphy_read_88xx(struct halmac_adapter *adapter, u8 addr, u8 speed) +{ + struct halmac_api *api = (struct halmac_api *)adapter->halmac_api; + u16 value = 0; + + if (speed == HAL_INTF_PHY_USB3) { + HALMAC_REG_W8(0xff0c, addr | BIT(6)); + value = (u16)(HALMAC_REG_R32(0xff0c) >> 8); + } else if (speed == HAL_INTF_PHY_USB2) { + if (addr >= 0xE0) + addr -= 0x20; + if (addr >= 0xC0 && addr <= 0xDF) { + HALMAC_REG_W8(0xfe40, addr); + HALMAC_REG_W8(0xfe42, 0x81); + value = HALMAC_REG_R8(0xfe43); + } else { + pr_err("phy offset\n"); + return HALMAC_RET_NOT_SUPPORT; + } + } else { + pr_err("usb speed !\n"); + return HALMAC_RET_NOT_SUPPORT; + } + + return value; +} diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.h new file mode 100644 index 000000000000..895215f8df1f --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_88xx/halmac_usb_88xx.h @@ -0,0 +1,83 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef _HALMAC_USB_88XX_H_ +#define _HALMAC_USB_88XX_H_ + +#include "../halmac_api.h" + +enum halmac_ret_status +init_usb_cfg_88xx(struct halmac_adapter *adapter); + +enum halmac_ret_status +deinit_usb_cfg_88xx(struct halmac_adapter *adapter); + +enum halmac_ret_status +cfg_usb_rx_agg_88xx(struct halmac_adapter *adapter, + struct halmac_rxagg_cfg *cfg); + +u8 +reg_r8_usb_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w8_usb_88xx(struct halmac_adapter *adapter, u32 offset, u8 value); + +u16 +reg_r16_usb_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w16_usb_88xx(struct halmac_adapter *adapter, u32 offset, u16 value); + +u32 +reg_r32_usb_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +reg_w32_usb_88xx(struct halmac_adapter *adapter, u32 offset, u32 value); + +enum halmac_ret_status +set_usb_bulkout_num_88xx(struct halmac_adapter *adapter, u8 num); + +enum halmac_ret_status +get_usb_bulkout_id_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u8 *id); + +enum halmac_ret_status +cfg_txagg_usb_align_88xx(struct halmac_adapter *adapter, u8 enable, + u16 align_size); + +enum halmac_ret_status +tx_allowed_usb_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size); + +u32 +usb_indirect_reg_r32_88xx(struct halmac_adapter *adapter, u32 offset); + +enum halmac_ret_status +usb_reg_rn_88xx(struct halmac_adapter *adapter, u32 offset, u32 size, + u8 *value); + +enum halmac_ret_status +get_usb_tx_addr_88xx(struct halmac_adapter *adapter, u8 *buf, u32 size, + u32 *cmd53_addr); + +enum halmac_ret_status +set_usb_mode_88xx(struct halmac_adapter *adapter, enum halmac_usb_mode mode); + +enum halmac_ret_status +usbphy_write_88xx(struct halmac_adapter *adapter, u8 addr, u16 data, u8 speed); + +u16 +usbphy_read_88xx(struct halmac_adapter *adapter, u8 addr, u8 speed); + +#endif/* _HALMAC_API_88XX_USB_H_ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_intf_phy_cmd.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_intf_phy_cmd.h new file mode 100644 index 000000000000..f44bfa11e4d9 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_intf_phy_cmd.h @@ -0,0 +1,45 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef HALMAC_INTF_PHY_CMD +#define HALMAC_INTF_PHY_CMD + +/* Cut mask */ +enum halmac_intf_phy_cut { + HALMAC_INTF_PHY_CUT_TESTCHIP = BIT(0), + HALMAC_INTF_PHY_CUT_A = BIT(1), + HALMAC_INTF_PHY_CUT_B = BIT(2), + HALMAC_INTF_PHY_CUT_C = BIT(3), + HALMAC_INTF_PHY_CUT_D = BIT(4), + HALMAC_INTF_PHY_CUT_E = BIT(5), + HALMAC_INTF_PHY_CUT_F = BIT(6), + HALMAC_INTF_PHY_CUT_G = BIT(7), + HALMAC_INTF_PHY_CUT_ALL = 0x7FFF, +}; + +/* IP selection */ +enum halmac_ip_sel { + HALMAC_IP_INTF_PHY = 0, + HALMAC_IP_SEL_MAC = 1, + HALMAC_IP_PCIE_DBI = 2, + HALMAC_IP_SEL_UNDEFINE = 0x7FFF, +}; + +/* Platform mask */ +enum halmac_intf_phy_platform { + HALMAC_INTF_PHY_PLATFORM_ALL = 0x7FFF, +}; + +#endif diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_pcie_reg.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_pcie_reg.h new file mode 100644 index 000000000000..a2406bea00be --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_pcie_reg.h @@ -0,0 +1,36 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef __HALMAC_PCIE_REG_H__ +#define __HALMAC_PCIE_REG_H__ + +/* PCIE PHY register */ +#define RAC_CTRL_PPR 0x00 +#define RAC_SET_PPR 0x20 +#define RAC_TRG_PPR 0x21 + +/* PCIE CFG register */ +#define PCIE_L1_BACKDOOR 0x719 +#define PCIE_ASPM_CTRL 0x70F + +/* PCIE MAC register */ +#define LINK_CTRL2_REG_OFFSET 0xA0 +#define GEN2_CTRL_OFFSET 0x80C +#define LINK_STATUS_REG_OFFSET 0x82 + +#define PCIE_GEN1_SPEED 0x01 +#define PCIE_GEN2_SPEED 0x02 + +#endif/* __HALMAC_PCIE_REG_H__ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_sdio_reg.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_sdio_reg.h new file mode 100644 index 000000000000..53b6b85d0e43 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_sdio_reg.h @@ -0,0 +1,53 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef __HALMAC_SDIO_REG_H__ +#define __HALMAC_SDIO_REG_H__ + +/* SDIO CMD address mapping */ + +#define HALMAC_SDIO_4BYTE_LEN_MASK 0x1FFF +#define HALMAC_SDIO_LOCAL_MSK 0x0FFF +#define HALMAC_WLAN_MAC_REG_MSK 0xFFFF +#define HALMAC_WLAN_IOREG_MSK 0xFFFF + +/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */ +enum halmac_sdio_cmd_addr { + HALMAC_SDIO_CMD_ADDR_SDIO_REG = 0, + HALMAC_SDIO_CMD_ADDR_MAC_REG = 8, + HALMAC_SDIO_CMD_ADDR_TXFF_HIGH = 4, + HALMAC_SDIO_CMD_ADDR_TXFF_LOW = 6, + HALMAC_SDIO_CMD_ADDR_TXFF_NORMAL = 5, + HALMAC_SDIO_CMD_ADDR_TXFF_EXTRA = 7, + HALMAC_SDIO_CMD_ADDR_RXFF = 7, +}; + +/* IO Bus domain address mapping */ +#define SDIO_LOCAL_OFFSET 0x10250000 +#define WLAN_IOREG_OFFSET 0x10260000 +#define FW_FIFO_OFFSET 0x10270000 +#define TX_HIQ_OFFSET 0x10310000 +#define TX_MIQ_OFFSET 0x10320000 +#define TX_LOQ_OFFSET 0x10330000 +#define TX_EXQ_OFFSET 0x10350000 +#define RX_RXOFF_OFFSET 0x10340000 + +/* Get TX WLAN FIFO information in CMD53 addr */ +#define GET_WLAN_TXFF_DEVICE_ID(cmd53_addr) \ + LE_BITS_TO_4BYTE((u32 *)cmd53_addr, 13, 4) +#define GET_WLAN_TXFF_PKT_SIZE(cmd53_addr) \ + (LE_BITS_TO_4BYTE((u32 *)cmd53_addr, 0, 13) << 2) + +#endif/* __HALMAC_SDIO_REG_H__ */ diff --git a/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_usb_reg.h b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_usb_reg.h new file mode 100644 index 000000000000..b856c55ef6cf --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/halmac/halmac_usb_reg.h @@ -0,0 +1,19 @@ +/****************************************************************************** + * + * Copyright(c) 2016 - 2018 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + ******************************************************************************/ + +#ifndef __HALMAC_USB_REG_H__ +#define __HALMAC_USB_REG_H__ + +#endif/* __HALMAC_USB_REG_H__ */