diff mbox

[v2] wcn36xx: pass correct BSS index when deleting BSS keys

Message ID 20180412122330.6916-1-daniel@zonque.org
State Accepted
Commit 0fc8bb50bbfc82d113218c803e1965838dcdbc89
Delegated to: Kalle Valo
Headers show

Commit Message

Daniel Mack April 12, 2018, 12:23 p.m. UTC
The firmware message to delete BSS keys expects a BSS index to be passed.
This field is currently hard-coded to 0. Fix this by passing in the index
we received from the firmware when the BSS was configured.

The encryption type in that message also needs to be set to what was used
when the key was set, so the assignment of vif_priv->encrypt_type is now
done after the firmware command was sent. This reportedly fixes the
following error in AP mode:

  wcn36xx: ERROR hal_remove_bsskey response failed err=6

Also, AFAIU, when a BSS is deleted, the firmware apparently drops all the
keys associated with it. Trying to remove the key explicitly afterwards
will hence lead to the following message:

  wcn36xx: ERROR hal_remove_bsskey response failed err=16

This is now suppressed with an extra check for the BSS index validity.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
v2: mention the vif_priv->encrypt_type move in the commit log.

 drivers/net/wireless/ath/wcn36xx/main.c | 10 +++++++---
 drivers/net/wireless/ath/wcn36xx/smd.c  |  6 ++++--
 drivers/net/wireless/ath/wcn36xx/smd.h  |  2 ++
 3 files changed, 13 insertions(+), 5 deletions(-)

Comments

Kalle Valo April 24, 2018, 5:57 a.m. UTC | #1
Daniel Mack <daniel@zonque.org> wrote:

> The firmware message to delete BSS keys expects a BSS index to be passed.
> This field is currently hard-coded to 0. Fix this by passing in the index
> we received from the firmware when the BSS was configured.
> 
> The encryption type in that message also needs to be set to what was used
> when the key was set, so the assignment of vif_priv->encrypt_type is now
> done after the firmware command was sent. This reportedly fixes the
> following error in AP mode:
> 
>   wcn36xx: ERROR hal_remove_bsskey response failed err=6
> 
> Also, AFAIU, when a BSS is deleted, the firmware apparently drops all the
> keys associated with it. Trying to remove the key explicitly afterwards
> will hence lead to the following message:
> 
>   wcn36xx: ERROR hal_remove_bsskey response failed err=16
> 
> This is now suppressed with an extra check for the BSS index validity.
> 
> Signed-off-by: Daniel Mack <daniel@zonque.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

0fc8bb50bbfc wcn36xx: pass correct BSS index when deleting BSS keys
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 0bc9283e7d8d..1b17c35a7944 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -547,6 +547,7 @@  static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		} else {
 			wcn36xx_smd_set_bsskey(wcn,
 				vif_priv->encrypt_type,
+				vif_priv->bss_index,
 				key_conf->keyidx,
 				key_conf->keylen,
 				key);
@@ -564,10 +565,13 @@  static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 	case DISABLE_KEY:
 		if (!(IEEE80211_KEY_FLAG_PAIRWISE & key_conf->flags)) {
+			if (vif_priv->bss_index != WCN36XX_HAL_BSS_INVALID_IDX)
+				wcn36xx_smd_remove_bsskey(wcn,
+					vif_priv->encrypt_type,
+					vif_priv->bss_index,
+					key_conf->keyidx);
+
 			vif_priv->encrypt_type = WCN36XX_HAL_ED_NONE;
-			wcn36xx_smd_remove_bsskey(wcn,
-				vif_priv->encrypt_type,
-				key_conf->keyidx);
 		} else {
 			sta_priv->is_data_encrypted = false;
 			/* do not remove key if disassociated */
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 9827a1e1124b..297a785d0785 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1636,6 +1636,7 @@  int wcn36xx_smd_set_stakey(struct wcn36xx *wcn,
 
 int wcn36xx_smd_set_bsskey(struct wcn36xx *wcn,
 			   enum ani_ed_type enc_type,
+			   u8 bssidx,
 			   u8 keyidx,
 			   u8 keylen,
 			   u8 *key)
@@ -1645,7 +1646,7 @@  int wcn36xx_smd_set_bsskey(struct wcn36xx *wcn,
 
 	mutex_lock(&wcn->hal_mutex);
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_SET_BSSKEY_REQ);
-	msg_body.bss_idx = 0;
+	msg_body.bss_idx = bssidx;
 	msg_body.enc_type = enc_type;
 	msg_body.num_keys = 1;
 	msg_body.keys[0].id = keyidx;
@@ -1706,6 +1707,7 @@  int wcn36xx_smd_remove_stakey(struct wcn36xx *wcn,
 
 int wcn36xx_smd_remove_bsskey(struct wcn36xx *wcn,
 			      enum ani_ed_type enc_type,
+			      u8 bssidx,
 			      u8 keyidx)
 {
 	struct wcn36xx_hal_remove_bss_key_req_msg msg_body;
@@ -1713,7 +1715,7 @@  int wcn36xx_smd_remove_bsskey(struct wcn36xx *wcn,
 
 	mutex_lock(&wcn->hal_mutex);
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_RMV_BSSKEY_REQ);
-	msg_body.bss_idx = 0;
+	msg_body.bss_idx = bssidx;
 	msg_body.enc_type = enc_type;
 	msg_body.key_id = keyidx;
 
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 8076edf40ac8..61bb8d43138c 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -97,6 +97,7 @@  int wcn36xx_smd_set_stakey(struct wcn36xx *wcn,
 			   u8 sta_index);
 int wcn36xx_smd_set_bsskey(struct wcn36xx *wcn,
 			   enum ani_ed_type enc_type,
+			   u8 bssidx,
 			   u8 keyidx,
 			   u8 keylen,
 			   u8 *key);
@@ -106,6 +107,7 @@  int wcn36xx_smd_remove_stakey(struct wcn36xx *wcn,
 			      u8 sta_index);
 int wcn36xx_smd_remove_bsskey(struct wcn36xx *wcn,
 			      enum ani_ed_type enc_type,
+			      u8 bssidx,
 			      u8 keyidx);
 int wcn36xx_smd_enter_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif);
 int wcn36xx_smd_exit_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif);