diff mbox series

[2/8] mt76: mt76x02: fix beacon timer drift adjustment

Message ID 20190226092945.54738-2-nbd@nbd.name (mailing list archive)
State Accepted
Delegated to: Kalle Valo
Headers show
Series [1/8] mt76: mt76x02: fix TSF sync mode | expand

Commit Message

Felix Fietkau Feb. 26, 2019, 9:29 a.m. UTC 
Check the count before incrementing it to match vendor code behavior.
This defers the adjustment by one more tick, which should improve accuracy

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
index 374bc9d91f12..f0198eea2bb8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
@@ -79,24 +79,24 @@  mt76x02_resync_beacon_timer(struct mt76x02_dev *dev)
 	 * Beacon timer drifts by 1us every tick, the timer is configured
 	 * in 1/16 TU (64us) units.
 	 */
-	if (dev->tbtt_count < 62)
+	if (dev->tbtt_count < 63)
 		return;
 
-	if (dev->tbtt_count >= 64) {
-		dev->tbtt_count = 0;
-		return;
-	}
-
 	/*
 	 * The updated beacon interval takes effect after two TBTT, because
 	 * at this point the original interval has already been loaded into
 	 * the next TBTT_TIMER value
 	 */
-	if (dev->tbtt_count == 62)
+	if (dev->tbtt_count == 63)
 		timer_val -= 1;
 
 	mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
 		       MT_BEACON_TIME_CFG_INTVAL, timer_val);
+
+	if (dev->tbtt_count >= 64) {
+		dev->tbtt_count = 0;
+		return;
+	}
 }
 
 static void mt76x02_pre_tbtt_tasklet(unsigned long arg)