From patchwork Thu Apr 30 17:25:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thomas Pedersen X-Patchwork-Id: 11521053 X-Patchwork-Delegate: johannes@sipsolutions.net Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6A24A92C for ; Thu, 30 Apr 2020 17:26:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5047B2082E for ; Thu, 30 Apr 2020 17:26:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726478AbgD3R0E (ORCPT ); Thu, 30 Apr 2020 13:26:04 -0400 Received: from mail.adapt-ip.com ([173.164.178.19]:41250 "EHLO web.adapt-ip.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726380AbgD3R0E (ORCPT ); Thu, 30 Apr 2020 13:26:04 -0400 Received: from localhost (localhost [127.0.0.1]) by web.adapt-ip.com (Postfix) with ESMTP id 75E624F80F6; Thu, 30 Apr 2020 17:26:03 +0000 (UTC) X-Virus-Scanned: Debian amavisd-new at web.adapt-ip.com Received: from web.adapt-ip.com ([127.0.0.1]) by localhost (web.adapt-ip.com [127.0.0.1]) (amavisd-new, port 10026) with ESMTP id OURlGKCOA-40; Thu, 30 Apr 2020 17:25:58 +0000 (UTC) Received: from atlas.campbell.adapt-ip.com (gateway.adapt-ip.com [173.164.178.20]) (Authenticated sender: thomas@adapt-ip.com) by web.adapt-ip.com (Postfix) with ESMTPSA id 4F6EF4F80EE; Thu, 30 Apr 2020 17:25:56 +0000 (UTC) From: Thomas Pedersen To: Johannes Berg Cc: linux-wireless , Thomas Pedersen Subject: [PATCH v4 2/5] nl80211: add KHz frequency offset for most wifi commands Date: Thu, 30 Apr 2020 10:25:51 -0700 Message-Id: <20200430172554.18383-3-thomas@adapt-ip.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200430172554.18383-1-thomas@adapt-ip.com> References: <20200430172554.18383-1-thomas@adapt-ip.com> MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen --- v2: use NLA_POLICY_RANGE for the freq offsets (Johannes) v4: handle case when center_freq1 is not supplied with an offset, but primary frequency had one. --- include/uapi/linux/nl80211.h | 50 +++++++++++++++-------- net/wireless/nl80211.c | 78 +++++++++++++++++++++++++++--------- 2 files changed, 91 insertions(+), 37 deletions(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9679d561f7d0..0ceb4de52d9a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -296,13 +296,14 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the - * attributes determining the channel width; this is used for setting - * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL - * instead, the support here is for backward compatibility only. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the + * channel width; this is used for setting monitor mode channel), + * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, + * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or + * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, + * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward + * compatibility only. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -351,7 +352,8 @@ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the + * attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -536,11 +538,12 @@ * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * the SSID (mainly for association, but is included in authentication - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE - * is used to specify the authentication type. %NL80211_ATTR_IE is used to - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) - * to be added to the frame. + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the + * authentication type. %NL80211_ATTR_IE is used to define IEs + * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added + * to the frame. * When used as an event, this reports reception of an Authentication * frame in station and IBSS modes when the local MLME processed the * frame, i.e., it was for the local STA and was received in correct @@ -595,8 +598,9 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, - * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, + * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and @@ -1433,7 +1437,8 @@ enum nl80211_commands { * of &enum nl80211_chan_width, describing the channel width. See the * documentation of the enum for more information. * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the - * channel, used for anything but 20 MHz bandwidth + * channel, used for anything but 20 MHz bandwidth. In S1G this is the + * operating channel center frequency. * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ @@ -2480,9 +2485,14 @@ enum nl80211_commands { * entry without having to force a disconnection after the PMK timeout. If * no roaming occurs between the reauth threshold and PMK expiration, * disassociation is still forced. - * * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the * %NL80211_CMD_REGISTER_FRAME command, see the description there. + * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated + * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with + * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. + * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the + * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. + * * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2960,6 +2970,8 @@ enum nl80211_attrs { NL80211_ATTR_PMK_REAUTH_THRESHOLD, NL80211_ATTR_RECEIVE_MULTICAST, + NL80211_ATTR_WIPHY_FREQ_OFFSET, + NL80211_ATTR_CENTER_FREQ1_OFFSET, /* add attributes here, update the policy in nl80211.c */ @@ -3682,6 +3694,7 @@ enum nl80211_wmm_rule { * (see &enum nl80211_wmm_rule) * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3712,6 +3725,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_10MHZ, NL80211_FREQUENCY_ATTR_WMM, NL80211_FREQUENCY_ATTR_NO_HE, + NL80211_FREQUENCY_ATTR_OFFSET, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4482,6 +4496,7 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. + * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4506,6 +4521,7 @@ enum nl80211_bss { NL80211_BSS_PARENT_TSF, NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, + NL80211_BSS_FREQUENCY_OFFSET, /* keep last */ __NL80211_BSS_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 755701132d71..a4ac9b38d0f2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -365,6 +365,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_CHANNEL_WIDTH] = { .type = NLA_U32 }, [NL80211_ATTR_CENTER_FREQ1] = { .type = NLA_U32 }, + [NL80211_ATTR_CENTER_FREQ1_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999), [NL80211_ATTR_CENTER_FREQ2] = { .type = NLA_U32 }, [NL80211_ATTR_WIPHY_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1), @@ -662,6 +663,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_PMK_LIFETIME] = NLA_POLICY_MIN(NLA_U32, 1), [NL80211_ATTR_PMK_REAUTH_THRESHOLD] = NLA_POLICY_RANGE(NLA_U8, 1, 100), [NL80211_ATTR_RECEIVE_MULTICAST] = { .type = NLA_FLAG }, + [NL80211_ATTR_WIPHY_FREQ_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999), }; /* policy for the key attributes */ @@ -946,6 +948,9 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy, chan->center_freq)) goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_OFFSET, chan->freq_offset)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_DISABLED) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_DISABLED)) goto nla_put_failure; @@ -1351,13 +1356,11 @@ static int nl80211_key_allowed(struct wireless_dev *wdev) } static struct ieee80211_channel *nl80211_get_valid_chan(struct wiphy *wiphy, - struct nlattr *tb) + u32 freq) { struct ieee80211_channel *chan; - if (tb == NULL) - return NULL; - chan = ieee80211_get_channel(wiphy, nla_get_u32(tb)); + chan = ieee80211_get_channel_khz(wiphy, freq); if (!chan || chan->flags & IEEE80211_CHAN_DISABLED) return NULL; return chan; @@ -2812,13 +2815,17 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev, if (!attrs[NL80211_ATTR_WIPHY_FREQ]) return -EINVAL; - control_freq = nla_get_u32(attrs[NL80211_ATTR_WIPHY_FREQ]); + control_freq = MHZ_TO_KHZ( + nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ])); + if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]) + control_freq += + nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]); memset(chandef, 0, sizeof(*chandef)); - - chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq); + chandef->chan = ieee80211_get_channel_khz(&rdev->wiphy, control_freq); chandef->width = NL80211_CHAN_WIDTH_20_NOHT; - chandef->center_freq1 = control_freq; + chandef->center_freq1 = KHZ_TO_MHZ(control_freq); + chandef->freq1_offset = control_freq % 1000; chandef->center_freq2 = 0; /* Primary channel not allowed */ @@ -2866,9 +2873,15 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev, } else if (attrs[NL80211_ATTR_CHANNEL_WIDTH]) { chandef->width = nla_get_u32(attrs[NL80211_ATTR_CHANNEL_WIDTH]); - if (attrs[NL80211_ATTR_CENTER_FREQ1]) + if (attrs[NL80211_ATTR_CENTER_FREQ1]) { chandef->center_freq1 = nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ1]); + if (attrs[NL80211_ATTR_CENTER_FREQ1_OFFSET]) + chandef->freq1_offset = nla_get_u32( + attrs[NL80211_ATTR_CENTER_FREQ1_OFFSET]); + else + chandef->freq1_offset = 0; + } if (attrs[NL80211_ATTR_CENTER_FREQ2]) chandef->center_freq2 = nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ2]); @@ -3301,6 +3314,9 @@ static int nl80211_send_chandef(struct sk_buff *msg, if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, chandef->chan->center_freq)) return -ENOBUFS; + if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET, + chandef->chan->freq_offset)) + return -ENOBUFS; switch (chandef->width) { case NL80211_CHAN_WIDTH_20_NOHT: case NL80211_CHAN_WIDTH_20: @@ -8918,6 +8934,8 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, goto nla_put_failure; if (nla_put_u16(msg, NL80211_BSS_CAPABILITY, res->capability) || nla_put_u32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq) || + nla_put_u32(msg, NL80211_BSS_FREQUENCY_OFFSET, + res->channel->freq_offset) || nla_put_u32(msg, NL80211_BSS_CHAN_WIDTH, res->scan_width) || nla_put_u32(msg, NL80211_BSS_SEEN_MS_AGO, jiffies_to_msecs(jiffies - intbss->ts))) @@ -9186,6 +9204,7 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info) enum nl80211_auth_type auth_type; struct key_parse key; bool local_state_change; + u32 freq; if (!info->attrs[NL80211_ATTR_MAC]) return -EINVAL; @@ -9242,8 +9261,12 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info) return -EOPNOTSUPP; bssid = nla_data(info->attrs[NL80211_ATTR_MAC]); - chan = nl80211_get_valid_chan(&rdev->wiphy, - info->attrs[NL80211_ATTR_WIPHY_FREQ]); + freq = MHZ_TO_KHZ(nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ])); + if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]) + freq += + nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]); + + chan = nl80211_get_valid_chan(&rdev->wiphy, freq); if (!chan) return -EINVAL; @@ -9433,6 +9456,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info) struct cfg80211_assoc_request req = {}; const u8 *bssid, *ssid; int err, ssid_len = 0; + u32 freq; if (dev->ieee80211_ptr->conn_owner_nlportid && dev->ieee80211_ptr->conn_owner_nlportid != info->snd_portid) @@ -9452,8 +9476,11 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info) bssid = nla_data(info->attrs[NL80211_ATTR_MAC]); - chan = nl80211_get_valid_chan(&rdev->wiphy, - info->attrs[NL80211_ATTR_WIPHY_FREQ]); + freq = MHZ_TO_KHZ(nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ])); + if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]) + freq += + nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]); + chan = nl80211_get_valid_chan(&rdev->wiphy, freq); if (!chan) return -EINVAL; @@ -10133,6 +10160,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) struct cfg80211_connect_params connect; struct wiphy *wiphy; struct cfg80211_cached_keys *connkeys = NULL; + u32 freq = 0; int err; memset(&connect, 0, sizeof(connect)); @@ -10203,14 +10231,21 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) connect.prev_bssid = nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]); - if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { - connect.channel = nl80211_get_valid_chan( - wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ]); + if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) + freq = MHZ_TO_KHZ(nla_get_u32( + info->attrs[NL80211_ATTR_WIPHY_FREQ])); + if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]) + freq += + nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]); + + if (freq) { + connect.channel = nl80211_get_valid_chan(wiphy, freq); if (!connect.channel) return -EINVAL; } else if (info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]) { - connect.channel_hint = nl80211_get_valid_chan( - wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]); + freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]); + freq = MHZ_TO_KHZ(freq); + connect.channel_hint = nl80211_get_valid_chan(wiphy, freq); if (!connect.channel_hint) return -EINVAL; } @@ -16257,6 +16292,7 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev, nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev), NL80211_ATTR_PAD) || nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, KHZ_TO_MHZ(freq)) || + nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET, freq % 1000) || (sig_dbm && nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) || nla_put(msg, NL80211_ATTR_FRAME, len, buf) || @@ -16906,8 +16942,10 @@ void cfg80211_report_obss_beacon_khz(struct wiphy *wiphy, const u8 *frame, if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || (freq && - nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, - KHZ_TO_MHZ(freq))) || + (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, + KHZ_TO_MHZ(freq)) || + nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET, + freq % 1000))) || (sig_dbm && nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) || nla_put(msg, NL80211_ATTR_FRAME, len, frame))