diff mbox series

mwifiex: Fix reporting 'operation not supported' error code

Message ID 20200703112151.18917-1-pali@kernel.org
State Accepted
Commit 9187f4e840929161be957fc0be28c51e964f9824
Delegated to: Kalle Valo
Headers show
Series mwifiex: Fix reporting 'operation not supported' error code | expand

Commit Message

Pali Rohár July 3, 2020, 11:21 a.m. UTC
ENOTSUPP (double PP) is internal linux kernel code 524 available only in
kernel include file linux/errno.h and not exported to userspace.

EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not
supported' available via kernel include file uapi/asm-generic/errno.h.

ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace
include file bits/errno.h and not available in kernel.

Because Linux kernel does not support ENOTSUP (single P) and because
userspace does not support ENOTSUPP (double PP), report error code for
'operation not supported' via EOPNOTSUPP macro.

This patch fixes problem that mwifiex kernel driver sends to userspace
unsupported error codes like: "failed: -524 (No error information)".
After applying this patch userspace see: "failed: -95 (Not supported)".

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 .../net/wireless/marvell/mwifiex/cfg80211.c    | 18 +++++++++---------
 drivers/net/wireless/marvell/mwifiex/main.c    |  2 +-
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c |  4 ++--
 3 files changed, 12 insertions(+), 12 deletions(-)

Comments

Ganapathi Bhat July 7, 2020, 7:21 a.m. UTC | #1
Hi Pali,

> This patch fixes problem that mwifiex kernel driver sends to userspace
> unsupported error codes like: "failed: -524 (No error information)".
> After applying this patch userspace see: "failed: -95 (Not supported)".
> 


OK, yes this was a mistake. Thank you for this change.

Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>

Regards,
Ganapathi
Kalle Valo July 15, 2020, 9:13 a.m. UTC | #2
Pali Rohár <pali@kernel.org> wrote:

> ENOTSUPP (double PP) is internal linux kernel code 524 available only in
> kernel include file linux/errno.h and not exported to userspace.
> 
> EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not
> supported' available via kernel include file uapi/asm-generic/errno.h.
> 
> ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace
> include file bits/errno.h and not available in kernel.
> 
> Because Linux kernel does not support ENOTSUP (single P) and because
> userspace does not support ENOTSUPP (double PP), report error code for
> 'operation not supported' via EOPNOTSUPP macro.
> 
> This patch fixes problem that mwifiex kernel driver sends to userspace
> unsupported error codes like: "failed: -524 (No error information)".
> After applying this patch userspace see: "failed: -95 (Not supported)".
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>

Patch applied to wireless-drivers-next.git, thanks.

9187f4e84092 mwifiex: Fix reporting 'operation not supported' error code
diff mbox series

Patch

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 867b5cf385a8..96848fa0e417 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -3727,11 +3727,11 @@  mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 	int ret;
 
 	if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	switch (action_code) {
 	case WLAN_TDLS_SETUP_REQUEST:
@@ -3799,11 +3799,11 @@  mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 
 	if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
 	    !(wiphy->flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mwifiex_dbg(priv->adapter, MSG,
 		    "TDLS peer=%pM, oper=%d\n", peer, action);
@@ -3833,7 +3833,7 @@  mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 	default:
 		mwifiex_dbg(priv->adapter, ERROR,
 			    "tdls_oper: operation not supported\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return mwifiex_tdls_oper(priv, peer, action);
@@ -3914,11 +3914,11 @@  mwifiex_cfg80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 
 	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	return mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CREATE_LINK);
 }
@@ -4151,11 +4151,11 @@  mwifiex_cfg80211_change_station(struct wiphy *wiphy, struct net_device *dev,
 
 	/* we support change_station handler only for TDLS peers*/
 	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	priv->sta_params = params;
 
diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index 529099137644..9ee5600351a7 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -953,7 +953,7 @@  int mwifiex_set_mac_address(struct mwifiex_private *priv,
 	} else {
 		/* Internal mac address change */
 		if (priv->bss_type == MWIFIEX_BSS_TYPE_ANY)
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 
 		mac_addr = old_mac_addr;
 
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
index 8bd355d7974e..d3a968ef21ef 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
@@ -1723,7 +1723,7 @@  mwifiex_cmd_tdls_config(struct mwifiex_private *priv,
 	default:
 		mwifiex_dbg(priv->adapter, ERROR,
 			    "Unknown TDLS configuration\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	le16_unaligned_add_cpu(&cmd->size, len);
@@ -1849,7 +1849,7 @@  mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 		break;
 	default:
 		mwifiex_dbg(priv->adapter, ERROR, "Unknown TDLS operation\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	le16_unaligned_add_cpu(&cmd->size, config_len);