diff mbox series

[32/36] wcn36xx: Encode PHY mode for 80MHz channel in hw_value

Message ID 20200803031132.1427063-33-bryan.odonoghue@linaro.org (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Add support for WCN3680 802.11ac | expand

Commit Message

Bryan O'Donoghue Aug. 3, 2020, 3:11 a.m. UTC
This commit encodes the 802.11ac PHY mode for a given channel in the upper
bits of the hw_value field. This allows for a neat read-out and application
of the relevant PHY setting.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 50 ++++++++++++-------------
 1 file changed, 25 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 6a85bb699d10..c96ae33a80d5 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -39,10 +39,10 @@  MODULE_PARM_DESC(debug_mask, "Debugging mask");
 	.max_power = 25, \
 }
 
-#define CHAN5G(_freq, _idx) { \
+#define CHAN5G(_freq, _idx, _phy_val) { \
 	.band = NL80211_BAND_5GHZ, \
 	.center_freq = (_freq), \
-	.hw_value = (_idx), \
+	.hw_value = (_phy_val) << HW_VALUE_PHY_SHIFT | HW_VALUE_CHANNEL(_idx), \
 	.max_power = 25, \
 }
 
@@ -67,29 +67,29 @@  static struct ieee80211_channel wcn_2ghz_channels[] = {
 };
 
 static struct ieee80211_channel wcn_5ghz_channels[] = {
-	CHAN5G(5180, 36),
-	CHAN5G(5200, 40),
-	CHAN5G(5220, 44),
-	CHAN5G(5240, 48),
-	CHAN5G(5260, 52),
-	CHAN5G(5280, 56),
-	CHAN5G(5300, 60),
-	CHAN5G(5320, 64),
-	CHAN5G(5500, 100),
-	CHAN5G(5520, 104),
-	CHAN5G(5540, 108),
-	CHAN5G(5560, 112),
-	CHAN5G(5580, 116),
-	CHAN5G(5600, 120),
-	CHAN5G(5620, 124),
-	CHAN5G(5640, 128),
-	CHAN5G(5660, 132),
-	CHAN5G(5700, 140),
-	CHAN5G(5745, 149),
-	CHAN5G(5765, 153),
-	CHAN5G(5785, 157),
-	CHAN5G(5805, 161),
-	CHAN5G(5825, 165)
+	CHAN5G(5180, 36, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5200, 40, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
+	CHAN5G(5220, 44, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5240, 48, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
+	CHAN5G(5260, 52, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5280, 56, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
+	CHAN5G(5300, 60, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5320, 64, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
+	CHAN5G(5500, 100, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5520, 104, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
+	CHAN5G(5540, 108, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5560, 112, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
+	CHAN5G(5580, 116, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5600, 120, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
+	CHAN5G(5620, 124, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5640, 128, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
+	CHAN5G(5660, 132, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5700, 140, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5745, 149, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5765, 153, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
+	CHAN5G(5785, 157, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5805, 161, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
+	CHAN5G(5825, 165, 0)
 };
 
 #define RATE(_bitrate, _hw_rate, _flags) { \