diff mbox series

[v2,2/3] wcn36xx: Enable firmware link monitoring

Message ID 20201103121735.291324-3-bryan.odonoghue@linaro.org (mailing list archive)
State Accepted
Commit 8def9ec46a5fafc0abcf34489a9e8a787bca984d
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Firmware link monitor/keepalive offload | expand

Commit Message

Bryan O'Donoghue Nov. 3, 2020, 12:17 p.m. UTC
This patch switches on CONNECTION_MONITOR. Once done it is up to the
firmware to send keep alive and to monitor the link state.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 706728fba72d..e924cc4acde0 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1246,6 +1246,7 @@  static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
 	ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL);
 	ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS);
 	ieee80211_hw_set(wcn->hw, REPORTS_TX_ACK_STATUS);
+	ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR);
 
 	wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_AP) |