diff mbox series

[v6,11/12] wcn36xx: Add host resume request support

Message ID 20210605011140.2004643-12-bryan.odonoghue@linaro.org
State Accepted
Commit ebe7c1a6635f19c61c14b78ba05a287e3022f4f8
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Enable downstream consistent Wake on Lan | expand

Commit Message

Bryan O'Donoghue June 5, 2021, 1:11 a.m. UTC
This commit is the corresponding resume() path request to the firmware when
resuming. Unlike the suspend() version which is a unidirectional
indication, the resume version is a standard request/response.

Once the resume() request completes ipv4 ARP, ipv6 NS and GTK rekey offload
stop working and can subsequently be rolled back.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
---
 drivers/net/wireless/ath/wcn36xx/main.c |  1 +
 drivers/net/wireless/ath/wcn36xx/smd.c  | 35 +++++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/smd.h  |  2 ++
 3 files changed, 38 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index e4d5e4d597f9..c697b9f3633a 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1144,6 +1144,7 @@  static int wcn36xx_resume(struct ieee80211_hw *hw)
 	mutex_lock(&wcn->conf_mutex);
 	vif = wcn36xx_get_first_assoc_vif(wcn);
 	if (vif) {
+		wcn36xx_smd_host_resume(wcn);
 		wcn36xx_smd_set_power_params(wcn, false);
 		wcn36xx_smd_gtk_offload_get_info(wcn, vif);
 		wcn36xx_smd_gtk_offload(wcn, vif, false);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 3b4ba6edd17a..cf8e52cbdd9b 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2985,6 +2985,40 @@  int wcn36xx_smd_wlan_host_suspend_ind(struct wcn36xx *wcn)
 	return ret;
 }
 
+int wcn36xx_smd_host_resume(struct wcn36xx *wcn)
+{
+	struct wcn36xx_hal_wlan_host_resume_req_msg msg_body;
+	struct wcn36xx_hal_host_resume_rsp_msg *rsp;
+	int ret;
+
+	mutex_lock(&wcn->hal_mutex);
+
+	INIT_HAL_MSG(msg_body, WCN36XX_HAL_HOST_RESUME_REQ);
+	msg_body.configured_mcst_bcst_filter_setting = 0;
+
+	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
+
+	ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len);
+	if (ret) {
+		wcn36xx_err("Sending wlan_host_resume failed\n");
+		goto out;
+	}
+	ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
+	if (ret) {
+		wcn36xx_err("wlan_host_resume err=%d\n", ret);
+		goto out;
+	}
+
+	rsp = (struct wcn36xx_hal_host_resume_rsp_msg *)wcn->hal_buf;
+	if (rsp->status)
+		wcn36xx_warn("wlan_host_resume status=%d\n", rsp->status);
+
+out:
+	mutex_unlock(&wcn->hal_mutex);
+
+	return ret;
+}
+
 int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
 			    void *buf, int len, void *priv, u32 addr)
 {
@@ -3036,6 +3070,7 @@  int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
 	case WCN36XX_HAL_HOST_OFFLOAD_RSP:
 	case WCN36XX_HAL_GTK_OFFLOAD_RSP:
 	case WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP:
+	case WCN36XX_HAL_HOST_RESUME_RSP:
 		memcpy(wcn->hal_buf, buf, len);
 		wcn->hal_rsp_len = len;
 		complete(&wcn->hal_rsp_compl);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 2909facdb100..d8bded03945d 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -161,4 +161,6 @@  int wcn36xx_smd_gtk_offload_get_info(struct wcn36xx *wcn,
 
 int wcn36xx_smd_wlan_host_suspend_ind(struct wcn36xx *wcn);
 
+int wcn36xx_smd_host_resume(struct wcn36xx *wcn);
+
 #endif	/* _SMD_H_ */