diff mbox series

[2/2] wifi: ath5k: Use platform_get_irq() to get the interrupt

Message ID 20230124110057.2.Ic4f8542b0588d7eb4bc6e322d4af3d2064e84ff0@changeid (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series [1/2] wifi: ath11k: Use platform_get_irq() to get the interrupt | expand

Commit Message

Doug Anderson Jan. 24, 2023, 7:01 p.m. UTC
For the same reasons talked about in commit 9503a1fc123d ("ath9k: Use
platform_get_irq() to get the interrupt"), we should be using
platform_get_irq() in ath5k. Let's make the switch.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
I'm not setup to actually test this, but I figured that I might as
well go all the way and fix all the instances of the same pattern that
I found in the ath drivers since the old call was actually breaking me
in ath11k. I did at least confirm that the code compiles for me.

If folks would rather not land an untested patch like this, though,
feel free to drop this and just land patch #1 as long as that one
looks OK.

 drivers/net/wireless/ath/ath5k/ahb.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
diff mbox series


diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
index 2c9cec8b53d9..28a1e5eff204 100644
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -113,15 +113,13 @@  static int ath_ahb_probe(struct platform_device *pdev)
 		goto err_out;
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no IRQ resource found\n");
-		ret = -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ resource found: %d\n", irq);
+		ret = irq;
 		goto err_iounmap;
-	irq = res->start;
 	hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
 	if (hw == NULL) {
 		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");