@@ -1702,6 +1702,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
* @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode
* @RATE_INFO_FLAGS_EXTENDED_SC_DMG: 60GHz extended SC MCS
* @RATE_INFO_FLAGS_EHT_MCS: EHT MCS information
+ * @RATE_INFO_FLAGS_S1G_MCS: MCS field filled with S1G MCS
*/
enum rate_info_flags {
RATE_INFO_FLAGS_MCS = BIT(0),
@@ -1712,6 +1713,7 @@ enum rate_info_flags {
RATE_INFO_FLAGS_EDMG = BIT(5),
RATE_INFO_FLAGS_EXTENDED_SC_DMG = BIT(6),
RATE_INFO_FLAGS_EHT_MCS = BIT(7),
+ RATE_INFO_FLAGS_S1G_MCS = BIT(8),
};
/**
@@ -1728,6 +1730,11 @@ enum rate_info_flags {
* @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation
* @RATE_INFO_BW_320: 320 MHz bandwidth
* @RATE_INFO_BW_EHT_RU: bandwidth determined by EHT RU allocation
+ * @RATE_INFO_BW_1: 1 MHz bandwidth
+ * @RATE_INFO_BW_2: 2 MHz bandwidth
+ * @RATE_INFO_BW_4: 4 MHz bandwidth
+ * @RATE_INFO_BW_8: 8 MHz bandwidth
+ * @RATE_INFO_BW_16: 16 MHz bandwidth
*/
enum rate_info_bw {
RATE_INFO_BW_20 = 0,
@@ -1739,6 +1746,11 @@ enum rate_info_bw {
RATE_INFO_BW_HE_RU,
RATE_INFO_BW_320,
RATE_INFO_BW_EHT_RU,
+ RATE_INFO_BW_1,
+ RATE_INFO_BW_2,
+ RATE_INFO_BW_4,
+ RATE_INFO_BW_8,
+ RATE_INFO_BW_16,
};
/**
@@ -1747,8 +1759,8 @@ enum rate_info_bw {
* Information about a receiving or transmitting bitrate
*
* @flags: bitflag of flags from &enum rate_info_flags
- * @mcs: mcs index if struct describes an HT/VHT/HE rate
* @legacy: bitrate in 100kbit/s for 802.11abg
+ * @mcs: mcs index if struct describes an HT/VHT/HE/EHT/S1G rate
* @nss: number of streams (VHT & HE only)
* @bw: bandwidth (from &enum rate_info_bw)
* @he_gi: HE guard interval (from &enum nl80211_he_gi)
@@ -1761,9 +1773,9 @@ enum rate_info_bw {
* only valid if bw is %RATE_INFO_BW_EHT_RU)
*/
struct rate_info {
- u8 flags;
- u8 mcs;
+ u16 flags;
u16 legacy;
+ u8 mcs;
u8 nss;
u8 bw;
u8 he_gi;
@@ -3667,6 +3667,13 @@ enum nl80211_eht_ru_alloc {
* (u8, see &enum nl80211_eht_gi)
* @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
* non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
+ * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)
+ * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)
+ * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate
+ * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate
+ * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
+ * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
+ * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
*/
enum nl80211_rate_info {
@@ -3693,6 +3700,13 @@ enum nl80211_rate_info {
NL80211_RATE_INFO_EHT_NSS,
NL80211_RATE_INFO_EHT_GI,
NL80211_RATE_INFO_EHT_RU_ALLOC,
+ NL80211_RATE_INFO_S1G_MCS,
+ NL80211_RATE_INFO_S1G_NSS,
+ NL80211_RATE_INFO_1_MHZ_WIDTH,
+ NL80211_RATE_INFO_2_MHZ_WIDTH,
+ NL80211_RATE_INFO_4_MHZ_WIDTH,
+ NL80211_RATE_INFO_8_MHZ_WIDTH,
+ NL80211_RATE_INFO_16_MHZ_WIDTH,
/* keep last */
__NL80211_RATE_INFO_AFTER_LAST,
@@ -6365,12 +6365,27 @@ bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, int attr)
return false;
switch (info->bw) {
+ case RATE_INFO_BW_1:
+ rate_flg = NL80211_RATE_INFO_1_MHZ_WIDTH;
+ break;
+ case RATE_INFO_BW_2:
+ rate_flg = NL80211_RATE_INFO_2_MHZ_WIDTH;
+ break;
+ case RATE_INFO_BW_4:
+ rate_flg = NL80211_RATE_INFO_4_MHZ_WIDTH;
+ break;
case RATE_INFO_BW_5:
rate_flg = NL80211_RATE_INFO_5_MHZ_WIDTH;
break;
+ case RATE_INFO_BW_8:
+ rate_flg = NL80211_RATE_INFO_8_MHZ_WIDTH;
+ break;
case RATE_INFO_BW_10:
rate_flg = NL80211_RATE_INFO_10_MHZ_WIDTH;
break;
+ case RATE_INFO_BW_16:
+ rate_flg = NL80211_RATE_INFO_16_MHZ_WIDTH;
+ break;
default:
WARN_ON(1);
fallthrough;
@@ -6429,6 +6444,14 @@ bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, int attr)
nla_put_u8(msg, NL80211_RATE_INFO_HE_RU_ALLOC,
info->he_ru_alloc))
return false;
+ } else if (info->flags & RATE_INFO_FLAGS_S1G_MCS) {
+ if (nla_put_u8(msg, NL80211_RATE_INFO_S1G_MCS, info->mcs))
+ return false;
+ if (nla_put_u8(msg, NL80211_RATE_INFO_S1G_NSS, info->nss))
+ return false;
+ if (info->flags & RATE_INFO_FLAGS_SHORT_GI &&
+ nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI))
+ return false;
} else if (info->flags & RATE_INFO_FLAGS_EHT_MCS) {
if (nla_put_u8(msg, NL80211_RATE_INFO_EHT_MCS, info->mcs))
return false;
@@ -1646,6 +1646,114 @@ static u32 cfg80211_calculate_bitrate_eht(struct rate_info *rate)
return result / 10000;
}
+static u32 cfg80211_calculate_bitrate_s1g(struct rate_info *rate)
+{
+ /* For 1, 2, 4, 8 and 16 MHz channels */
+ static const u32 base[5][11] = {
+ { 300000,
+ 600000,
+ 900000,
+ 1200000,
+ 1800000,
+ 2400000,
+ 2700000,
+ 3000000,
+ 3600000,
+ 4000000,
+ /* MCS 10 supported in 1 MHz only */
+ 150000,
+ },
+ { 650000,
+ 1300000,
+ 1950000,
+ 2600000,
+ 3900000,
+ 5200000,
+ 5850000,
+ 6500000,
+ 7800000,
+ /* MCS 9 not valid */
+ },
+ { 1350000,
+ 2700000,
+ 4050000,
+ 5400000,
+ 8100000,
+ 10800000,
+ 12150000,
+ 13500000,
+ 16200000,
+ 18000000,
+ },
+ { 2925000,
+ 5850000,
+ 8775000,
+ 11700000,
+ 17550000,
+ 23400000,
+ 26325000,
+ 29250000,
+ 35100000,
+ 39000000,
+ },
+ { 8580000,
+ 11700000,
+ 17550000,
+ 23400000,
+ 35100000,
+ 46800000,
+ 52650000,
+ 58500000,
+ 70200000,
+ 78000000,
+ },
+ };
+ u32 bitrate;
+ /* default is 1 MHz index */
+ int idx = 0;
+
+ if (rate->mcs >= 11)
+ goto warn;
+
+ switch (rate->bw) {
+ case RATE_INFO_BW_16:
+ idx = 4;
+ break;
+ case RATE_INFO_BW_8:
+ idx = 3;
+ break;
+ case RATE_INFO_BW_4:
+ idx = 2;
+ break;
+ case RATE_INFO_BW_2:
+ idx = 1;
+ break;
+ case RATE_INFO_BW_1:
+ idx = 0;
+ break;
+ case RATE_INFO_BW_5:
+ case RATE_INFO_BW_10:
+ case RATE_INFO_BW_20:
+ case RATE_INFO_BW_40:
+ case RATE_INFO_BW_80:
+ case RATE_INFO_BW_160:
+ default:
+ goto warn;
+ }
+
+ bitrate = base[idx][rate->mcs];
+ bitrate *= rate->nss;
+
+ if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+ bitrate = (bitrate / 9) * 10;
+ /* do NOT round down here */
+ return (bitrate + 50000) / 100000;
+warn:
+ WARN_ONCE(1, "invalid rate bw=%d, mcs=%d, nss=%d\n",
+ rate->bw, rate->mcs, rate->nss);
+ return 0;
+}
+
u32 cfg80211_calculate_bitrate(struct rate_info *rate)
{
if (rate->flags & RATE_INFO_FLAGS_MCS)
@@ -1662,6 +1770,8 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate)
return cfg80211_calculate_bitrate_he(rate);
if (rate->flags & RATE_INFO_FLAGS_EHT_MCS)
return cfg80211_calculate_bitrate_eht(rate);
+ if (rate->flags & RATE_INFO_FLAGS_S1G_MCS)
+ return cfg80211_calculate_bitrate_s1g(rate);
return rate->legacy;
}
Increase the size of S1G rate_info flags to support S1G and add flags for new S1G MCS and the supported bandwidths. Also, include S1G rate information to netlink STA rate message. Lastly, add rate calculation function for S1G MCS. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202305110435.EhEiLYWA-lkp@intel.com/ Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> --- v3: - Add changelog to commit message v2: - Add link to Dan Carpenter's reported issue - Fix for the issue above - Add missing S1G kernel-doc for MCS and the requested EHT --- include/net/cfg80211.h | 18 +++++- include/uapi/linux/nl80211.h | 14 +++++ net/wireless/nl80211.c | 23 ++++++++ net/wireless/util.c | 110 +++++++++++++++++++++++++++++++++++ 4 files changed, 162 insertions(+), 3 deletions(-) base-commit: f3dc7bb037d813ab7da84f488dd485f0fce66347