From patchwork Tue Aug 6 17:00:04 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Nemanov, Michael" X-Patchwork-Id: 13755110 X-Patchwork-Delegate: kvalo@adurom.com Received: from lelv0142.ext.ti.com (lelv0142.ext.ti.com [198.47.23.249]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6DAEC4AEE0; Tue, 6 Aug 2024 17:01:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.47.23.249 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722963700; cv=none; b=eZdXOwgmygj9DFc06Q1ZZwCdJ7xOK9rpfZOiBCYErWqTKT2PS1VcxgX1oBsQytbn3dQZsEBuSaStBL4j5raJgCfDDdIDT01ODrfSxuDSwLKtM5YYx+nS/HT9A457Tu7cFGERp0DQcvLnmStrEsB0DNzOQ6I+Q54PoWERIAkISZ8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722963700; c=relaxed/simple; bh=tzeirnFJWxx+cz1PpmPt+XxpH+azIK/4wTW7jwoKuzM=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=QdqBrwGXHT6DCFNHSf8V8gxLCuposkoQbPyiNEmD3y4Vig6V1UpfEGzxNX1qvYaGwMgJ4YWi/RYuUYBziNn8e6GSUvyHAwoRc9k0dzpg7r4DqWt5fLFA1SS5VWLwMYEvhQcYBPQ5UDji55ORoK5ilZB/pES6a4wNn2FYKYcjkm0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com; spf=pass smtp.mailfrom=ti.com; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b=GXFv9FO0; arc=none smtp.client-ip=198.47.23.249 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ti.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="GXFv9FO0" Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 476H1U83117605; Tue, 6 Aug 2024 12:01:30 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1722963690; bh=A1F4lAyD77U5opm2xOGneHVReOj23QZGVuT+vV2YHJk=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=GXFv9FO0GVDSLbmryVATUWZOA7YyJPxWgsKG2jc/dBVZvbYD7XM4m/KQl3KleAt0e 6+dfAS6g8hzcERjQYwvHogJidP4awnDmzcGRNgEaXijhgSoCxcdBugJqanLa6qyHUb JvDS5Y7ukceGLfepvjSPa87eeX1BGOL0ecMmj2pA= Received: from DLEE104.ent.ti.com (dlee104.ent.ti.com [157.170.170.34]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 476H1UMR006230 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 6 Aug 2024 12:01:30 -0500 Received: from DLEE110.ent.ti.com (157.170.170.21) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Tue, 6 Aug 2024 12:01:29 -0500 Received: from lelvsmtp6.itg.ti.com (10.180.75.249) by DLEE110.ent.ti.com (157.170.170.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Tue, 6 Aug 2024 12:01:29 -0500 Received: from localhost (udb0389739.dhcp.ti.com [137.167.1.149]) by lelvsmtp6.itg.ti.com (8.15.2/8.15.2) with ESMTP id 476H1SR5036897; Tue, 6 Aug 2024 12:01:29 -0500 From: Michael Nemanov To: Kalle Valo , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , , , , CC: Sabeeh Khan , Michael Nemanov Subject: [PATCH v3 03/17] wifi: cc33xx: Add sdio.c, io.c, io.h Date: Tue, 6 Aug 2024 20:00:04 +0300 Message-ID: <20240806170018.638585-4-michael.nemanov@ti.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240806170018.638585-1-michael.nemanov@ti.com> References: <20240806170018.638585-1-michael.nemanov@ti.com> Precedence: bulk X-Mailing-List: linux-wireless@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 sdio.c implements SDIO transport functions. These are bound into struct cc33xx_if_operations and accessed via io.h in order to abstract multiple transport interfaces such as SPI in the future. The CC33xx driver supports the SDIO in-band IRQ option so the IRQ from the device received here as well. Unlike wl1xxx products, there is no longer mapping between HW and SDIO / SPI address space of any kind. There are only 3 valid addresses for control, data and status transactions each with a predefined structure. Signed-off-by: Michael Nemanov --- drivers/net/wireless/ti/cc33xx/io.c | 131 ++++++ drivers/net/wireless/ti/cc33xx/io.h | 26 ++ drivers/net/wireless/ti/cc33xx/sdio.c | 584 ++++++++++++++++++++++++++ 3 files changed, 741 insertions(+) create mode 100644 drivers/net/wireless/ti/cc33xx/io.c create mode 100644 drivers/net/wireless/ti/cc33xx/io.h create mode 100644 drivers/net/wireless/ti/cc33xx/sdio.c diff --git a/drivers/net/wireless/ti/cc33xx/io.c b/drivers/net/wireless/ti/cc33xx/io.c new file mode 100644 index 000000000000..c8759b63ac2d --- /dev/null +++ b/drivers/net/wireless/ti/cc33xx/io.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "cc33xx.h" +#include "debug.h" +#include "io.h" +#include "tx.h" + +bool cc33xx_set_block_size(struct cc33xx *cc) +{ + if (cc->if_ops->set_block_size) { + cc->if_ops->set_block_size(cc->dev, CC33XX_BUS_BLOCK_SIZE); + cc33xx_debug(DEBUG_CC33xx, + "Set BLKsize to %d", CC33XX_BUS_BLOCK_SIZE); + return true; + } + + cc33xx_debug(DEBUG_CC33xx, "Could not set BLKsize"); + return false; +} + +void cc33xx_disable_interrupts_nosync(struct cc33xx *cc) +{ + cc->if_ops->disable_irq(cc->dev); +} + +void cc33xx_irq(void *cookie); +void cc33xx_enable_interrupts(struct cc33xx *cc) +{ + cc->if_ops->enable_irq(cc->dev); + + cc33xx_debug(DEBUG_CC33xx, "IBI_WA: Read core status"); + cc33xx_irq(cc); + cc33xx_debug(DEBUG_CC33xx, "IBI_WA: Core status processed"); +} + +void cc33xx_io_reset(struct cc33xx *cc) +{ + if (cc->if_ops->reset) + cc->if_ops->reset(cc->dev); +} + +void cc33xx_io_init(struct cc33xx *cc) +{ + if (cc->if_ops->init) + cc->if_ops->init(cc->dev); +} + +/* Raw target IO, address is not translated */ +static int __must_check cc33xx_raw_write(struct cc33xx *cc, int addr, + void *buf, size_t len, bool fixed) +{ + int ret; + + if (test_bit(CC33XX_FLAG_IO_FAILED, &cc->flags) || + WARN_ON((test_bit(CC33XX_FLAG_IN_ELP, &cc->flags) && + addr != HW_ACCESS_ELP_CTRL_REG))) + return -EIO; + + ret = cc->if_ops->write(cc->dev, addr, buf, len, fixed); + if (ret && cc->state != CC33XX_STATE_OFF) + set_bit(CC33XX_FLAG_IO_FAILED, &cc->flags); + + return ret; +} + +int __must_check cc33xx_raw_read(struct cc33xx *cc, int addr, + void *buf, size_t len, bool fixed) +{ + int ret; + + if (test_bit(CC33XX_FLAG_IO_FAILED, &cc->flags) || + WARN_ON((test_bit(CC33XX_FLAG_IN_ELP, &cc->flags) && + addr != HW_ACCESS_ELP_CTRL_REG))) + return -EIO; + + ret = cc->if_ops->read(cc->dev, addr, buf, len, fixed); + if (ret && cc->state != CC33XX_STATE_OFF) + set_bit(CC33XX_FLAG_IO_FAILED, &cc->flags); + + return ret; +} + +int __must_check cc33xx_write(struct cc33xx *cc, int addr, + void *buf, size_t len, bool fixed) +{ + return cc33xx_raw_write(cc, addr, buf, len, fixed); +} + +void claim_core_status_lock(struct cc33xx *cc) +{ + /* When accessing core-status data (read or write) the transport lock + * should be held. + */ + cc->if_ops->interface_claim(cc->dev); +} + +void release_core_status_lock(struct cc33xx *cc) +{ + /* After accessing core-status data (read or write) the transport lock + * should be released. + */ + cc->if_ops->interface_release(cc->dev); +} + +void cc33xx_power_off(struct cc33xx *cc) +{ + int ret = 0; + + if (!test_bit(CC33XX_FLAG_GPIO_POWER, &cc->flags)) + return; + + if (cc->if_ops->power) + ret = cc->if_ops->power(cc->dev, false); + if (!ret) + clear_bit(CC33XX_FLAG_GPIO_POWER, &cc->flags); +} + +int cc33xx_power_on(struct cc33xx *cc) +{ + int ret = 0; + + if (cc->if_ops->power) + ret = cc->if_ops->power(cc->dev, true); + if (ret == 0) + set_bit(CC33XX_FLAG_GPIO_POWER, &cc->flags); + + return ret; +} diff --git a/drivers/net/wireless/ti/cc33xx/io.h b/drivers/net/wireless/ti/cc33xx/io.h new file mode 100644 index 000000000000..cc5abd428d99 --- /dev/null +++ b/drivers/net/wireless/ti/cc33xx/io.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#ifndef __IO_H__ +#define __IO_H__ + +struct cc33xx; + +void cc33xx_disable_interrupts_nosync(struct cc33xx *cc); +void cc33xx_enable_interrupts(struct cc33xx *cc); +void cc33xx_io_reset(struct cc33xx *cc); +void cc33xx_io_init(struct cc33xx *cc); +int __must_check cc33xx_raw_read(struct cc33xx *cc, int addr, + void *buf, size_t len, bool fixed); +int __must_check cc33xx_write(struct cc33xx *cc, int addr, + void *buf, size_t len, bool fixed); +void claim_core_status_lock(struct cc33xx *cc); +void release_core_status_lock(struct cc33xx *cc); +void cc33xx_power_off(struct cc33xx *cc); +int cc33xx_power_on(struct cc33xx *cc); +int cc33xx_translate_addr(struct cc33xx *cc, int addr); +bool cc33xx_set_block_size(struct cc33xx *cc); + +#endif /* __IO_H__ */ diff --git a/drivers/net/wireless/ti/cc33xx/sdio.c b/drivers/net/wireless/ti/cc33xx/sdio.c new file mode 100644 index 000000000000..ef41dc352a64 --- /dev/null +++ b/drivers/net/wireless/ti/cc33xx/sdio.c @@ -0,0 +1,584 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include +#include +#include +#include +#include + +#include "cc33xx.h" +#include "io.h" + +#ifndef SDIO_VENDOR_ID_TI +#define SDIO_VENDOR_ID_TI 0x0097 +#endif + +#define SDIO_DEVICE_ID_CC33XX_NO_EFUSE 0x4076 +#define SDIO_DEVICE_ID_TI_CC33XX 0x4077 + +static bool dump; + +struct cc33xx_sdio_glue { + struct device *dev; + struct platform_device *core; +}; + +static const struct sdio_device_id cc33xx_devices[] = { + { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_CC33XX) }, + { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_CC33XX_NO_EFUSE) }, + {} +}; +MODULE_DEVICE_TABLE(sdio, cc33xx_devices); + +static void cc33xx_sdio_claim(struct device *child) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); +} + +static void cc33xx_sdio_release(struct device *child) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_release_host(func); +} + +static void cc33xx_sdio_set_block_size(struct device *child, + unsigned int blksz) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + sdio_set_block_size(func, blksz); + sdio_release_host(func); +} + +static int __must_check cc33xx_sdio_raw_read(struct device *child, int addr, + void *buf, size_t len, bool fixed) +{ + int ret; + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + + if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { + ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); + dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n", + addr, ((u8 *)buf)[0]); + } else { + if (fixed) + ret = sdio_readsb(func, buf, addr, len); + else + ret = sdio_memcpy_fromio(func, buf, addr, len); + + dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n", + addr, len); + } + + sdio_release_host(func); + + if (WARN_ON(ret)) + dev_err(child->parent, "sdio read failed (%d)\n", ret); + + if (unlikely(dump)) { + dev_dbg(glue->dev, "cc33xx_sdio: READ from 0x%04x\n", addr); + print_hex_dump(KERN_DEBUG, "cc33xx_sdio: READ ", + DUMP_PREFIX_OFFSET, 16, 1, buf, len, false); + } + + return ret; +} + +static int __must_check cc33xx_sdio_raw_write(struct device *child, int addr, + void *buf, size_t len, bool fixed) +{ + int ret; + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + + if (unlikely(dump)) { + dev_dbg(child->parent, "cc33xx_sdio: WRITE to 0x%04x length 0x%zx (first 64 Bytes):\n", + addr, len); + print_hex_dump(KERN_DEBUG, "cc33xx_sdio: WRITE ", + DUMP_PREFIX_OFFSET, 16, 1, buf, + min(len, (size_t)64), false); + } + + if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { + sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); + dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n", + addr, ((u8 *)buf)[0]); + } else { + dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n", + addr, len); + + if (fixed) + ret = sdio_writesb(func, addr, buf, len); + else + ret = sdio_memcpy_toio(func, addr, buf, len); + } + + sdio_release_host(func); + + if (WARN_ON(ret)) + dev_err(child->parent, "sdio write failed (%d)\n", ret); + + return ret; +} + +static int cc33xx_sdio_power_on(struct cc33xx_sdio_glue *glue) +{ + int ret; + struct sdio_func *func = dev_to_sdio_func(glue->dev); + struct mmc_card *card = func->card; + + ret = pm_runtime_get_sync(&card->dev); + if (ret < 0) { + pm_runtime_put_noidle(&card->dev); + dev_err(glue->dev, "%s: failed to get_sync(%d)\n", + __func__, ret); + + return ret; + } + + sdio_claim_host(func); + sdio_enable_func(func); + sdio_release_host(func); + + return 0; +} + +static int cc33xx_sdio_power_off(struct cc33xx_sdio_glue *glue) +{ + struct sdio_func *func = dev_to_sdio_func(glue->dev); + struct mmc_card *card = func->card; + + sdio_claim_host(func); + sdio_disable_func(func); + sdio_release_host(func); + + /* Let runtime PM know the card is powered off */ + pm_runtime_put(&card->dev); + return 0; +} + +static int cc33xx_sdio_set_power(struct device *child, bool enable) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + + if (enable) + return cc33xx_sdio_power_on(glue); + else + return cc33xx_sdio_power_off(glue); +} + +/** + * inband_irq_handler - Called from the MMC subsystem when the + * function's IRQ is signaled. + * @func: an SDIO function of the card + * + * Note that the host is already claimed when handler is invoked. + */ +static void inband_irq_handler(struct sdio_func *func) +{ + struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func); + struct platform_device *pdev = glue->core; + struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); + + dev_dbg(glue->dev, "Inband SDIO IRQ"); + + if (WARN_ON(!pdev_data->irq_handler)) + return; + + pdev_data->irq_handler(pdev); +} + +static void cc33xx_enable_async_interrupt(struct sdio_func *func) +{ + u8 reg_val; + const int CCCR_REG_16_ADDR = 0x16; + const int ENABLE_ASYNC_IRQ_BIT = BIT(1); + + reg_val = sdio_f0_readb(func, CCCR_REG_16_ADDR, NULL); + reg_val |= ENABLE_ASYNC_IRQ_BIT; + sdio_f0_writeb(func, reg_val, CCCR_REG_16_ADDR, NULL); +} + +static void cc33xx_sdio_enable_irq(struct device *child) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + cc33xx_enable_async_interrupt(func); + sdio_claim_irq(func, inband_irq_handler); + sdio_release_host(func); +} + +static void cc33xx_sdio_disable_irq(struct device *child) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + sdio_release_irq(func); + sdio_release_host(func); +} + +static void cc33xx_enable_line_irq(struct device *child) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct platform_device *pdev = glue->core; + struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); + + enable_irq(pdev_data->gpio_irq_num); +} + +static void cc33xx_disable_line_irq(struct device *child) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct platform_device *pdev = glue->core; + struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); + + disable_irq_nosync(pdev_data->gpio_irq_num); +} + +static void cc33xx_set_irq_handler(struct device *child, void *handler) +{ + struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct platform_device *pdev = glue->core; + struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); + + pdev_data->irq_handler = handler; +} + +static struct cc33xx_if_operations sdio_ops_gpio_irq = { + .interface_claim = cc33xx_sdio_claim, + .interface_release = cc33xx_sdio_release, + .read = cc33xx_sdio_raw_read, + .write = cc33xx_sdio_raw_write, + .power = cc33xx_sdio_set_power, + .set_block_size = cc33xx_sdio_set_block_size, + .set_irq_handler = cc33xx_set_irq_handler, + .disable_irq = cc33xx_disable_line_irq, + .enable_irq = cc33xx_enable_line_irq, +}; + +static struct cc33xx_if_operations sdio_ops_inband_irq = { + .interface_claim = cc33xx_sdio_claim, + .interface_release = cc33xx_sdio_release, + .read = cc33xx_sdio_raw_read, + .write = cc33xx_sdio_raw_write, + .power = cc33xx_sdio_set_power, + .set_block_size = cc33xx_sdio_set_block_size, + .set_irq_handler = cc33xx_set_irq_handler, + .disable_irq = cc33xx_sdio_disable_irq, + .enable_irq = cc33xx_sdio_enable_irq, +}; + +#ifdef CONFIG_OF +static const struct cc33xx_family_data cc33xx_data = { + .name = "cc33xx", + .cfg_name = "ti-connectivity/cc33xx-conf.bin", + .nvs_name = "ti-connectivity/cc33xx-nvs.bin", +}; + +static const struct of_device_id cc33xx_sdio_of_match_table[] = { + { .compatible = "ti,cc3300", .data = &cc33xx_data }, + { .compatible = "ti,cc3301", .data = &cc33xx_data }, + { .compatible = "ti,cc3350", .data = &cc33xx_data }, + { .compatible = "ti,cc3351", .data = &cc33xx_data }, + { } +}; + +static int cc33xx_probe_of(struct device *dev, int *irq, int *wakeirq, + struct cc33xx_platdev_data *pdev_data) +{ + struct device_node *np = dev->of_node; + const struct of_device_id *of_id; + + of_id = of_match_node(cc33xx_sdio_of_match_table, np); + if (!of_id) + return -ENODEV; + + pdev_data->family = of_id->data; + + *irq = irq_of_parse_and_map(np, 0); + + *wakeirq = irq_of_parse_and_map(np, 1); + + return 0; +} +#else +static int cc33xx_probe_of(struct device *dev, int *irq, int *wakeirq, + struct cc33xx_platdev_data *pdev_data) +{ + return -ENODATA; +} +#endif /* CONFIG_OF */ + +static irqreturn_t gpio_irq_hard_handler(int irq, void *cookie) +{ + return IRQ_WAKE_THREAD; +} + +static irqreturn_t gpio_irq_thread_handler(int irq, void *cookie) +{ + struct sdio_func *func = cookie; + struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func); + struct platform_device *pdev = glue->core; + struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); + + if (WARN_ON(!pdev_data->irq_handler)) + return IRQ_HANDLED; + + pdev_data->irq_handler(pdev); + + return IRQ_HANDLED; +} + +static int sdio_cc33xx_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + struct cc33xx_platdev_data *pdev_data; + struct cc33xx_sdio_glue *glue; + struct resource res[1]; + mmc_pm_flag_t mmcflags; + int ret = -ENOMEM; + int gpio_irq, wakeirq, irq_flags; + const char *chip_family; + + /* We are only able to handle the wlan function */ + if (func->num != 0x02) + return -ENODEV; + + pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) + return -ENOMEM; + + glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->dev = &func->dev; + + /* Grab access to FN0 for ELP reg. */ + func->card->quirks |= MMC_QUIRK_LENIENT_FN0; + + /* Use block mode for transferring over one block size of data */ + func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; + + ret = cc33xx_probe_of(&func->dev, &gpio_irq, &wakeirq, pdev_data); + if (ret) + goto out; + + /* if sdio can keep power while host is suspended, enable wow */ + mmcflags = sdio_get_host_pm_caps(func); + dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); + + sdio_set_drvdata(func, glue); + + /* Tell PM core that we don't need the card to be powered now */ + pm_runtime_put_noidle(&func->dev); + + chip_family = "cc33xx"; + + glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); + if (!glue->core) { + dev_err(glue->dev, "can't allocate platform_device"); + ret = -ENOMEM; + goto out; + } + + glue->core->dev.parent = &func->dev; + + if (gpio_irq) { + dev_info(glue->dev, "Using GPIO as IRQ\n"); + + irq_flags = irqd_get_trigger_type(irq_get_irq_data(gpio_irq)); + + irq_set_status_flags(gpio_irq, IRQ_NOAUTOEN); + + if (irq_flags & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) + irq_flags |= IRQF_ONESHOT; + + ret = request_threaded_irq(gpio_irq, gpio_irq_hard_handler, + gpio_irq_thread_handler, + irq_flags, glue->core->name, func); + if (ret) { + dev_err(glue->dev, "can't register GPIO IRQ handler\n"); + goto out_dev_put; + } + + pdev_data->gpio_irq_num = gpio_irq; + + if ((mmcflags & MMC_PM_KEEP_POWER) && + (enable_irq_wake(gpio_irq) == 0)) + pdev_data->pwr_in_suspend = true; + + pdev_data->if_ops = &sdio_ops_gpio_irq; + } else { + dev_info(glue->dev, "Using SDIO in-band IRQ\n"); + + pdev_data->if_ops = &sdio_ops_inband_irq; + } + + if (wakeirq > 0) { + res[0].start = wakeirq; + res[0].flags = IORESOURCE_IRQ | + irqd_get_trigger_type(irq_get_irq_data(wakeirq)); + res[0].name = "wakeirq"; + + ret = platform_device_add_resources(glue->core, res, 1); + if (ret) { + dev_err(glue->dev, "can't add resources\n"); + goto out_dev_put; + } + } + + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); + if (ret) { + dev_err(glue->dev, "can't add platform data\n"); + goto out_dev_put; + } + + ret = platform_device_add(glue->core); + if (ret) { + dev_err(glue->dev, "can't add platform device\n"); + goto out_dev_put; + } + return 0; + +out_dev_put: + platform_device_put(glue->core); + + if (pdev_data->gpio_irq_num) + free_irq(pdev_data->gpio_irq_num, func); + +out: + return ret; +} + +static void sdio_cc33xx_remove(struct sdio_func *func) +{ + struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func); + struct platform_device *pdev = glue->core; + struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); + + /* Undo decrement done above in sdio_cc33xx_probe */ + pm_runtime_get_noresume(&func->dev); + + platform_device_unregister(glue->core); + + if (pdev_data->gpio_irq_num) { + free_irq(pdev_data->gpio_irq_num, func); + if (pdev_data->pwr_in_suspend) + disable_irq_wake(pdev_data->gpio_irq_num); + } else { + sdio_claim_host(func); + sdio_release_irq(func); + sdio_release_host(func); + } +} + +#ifdef CONFIG_PM +static int cc33xx_suspend(struct device *dev) +{ + /* Tell MMC/SDIO core it's OK to power down the card + * (if it isn't already), but not to remove it completely + */ + struct sdio_func *func = dev_to_sdio_func(dev); + struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func); + struct cc33xx *cc = platform_get_drvdata(glue->core); + mmc_pm_flag_t sdio_flags; + int ret = 0; + + if (!cc) { + dev_err(dev, "no wilink module was probed\n"); + goto out; + } + + dev_dbg(dev, "cc33xx suspend. keep_device_power: %d\n", + cc->keep_device_power); + + if (cc->keep_device_power) { + sdio_flags = sdio_get_host_pm_caps(func); + + if (!(sdio_flags & MMC_PM_KEEP_POWER)) { + dev_err(dev, "can't keep power while host is suspended\n"); + ret = -EINVAL; + goto out; + } + + /* keep power while host suspended */ + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (ret) { + dev_err(dev, "error while trying to keep power\n"); + goto out; + } + } +out: + return ret; +} + +static int cc33xx_resume(struct device *dev) +{ + dev_dbg(dev, "cc33xx resume\n"); + + return 0; +} + +static const struct dev_pm_ops cc33xx_sdio_pm_ops = { + .suspend = cc33xx_suspend, + .resume = cc33xx_resume, +}; + +static struct sdio_driver cc33xx_sdio_driver = { + .name = "cc33xx_sdio", + .id_table = cc33xx_devices, + .probe = sdio_cc33xx_probe, + .remove = sdio_cc33xx_remove, + .drv = { + .pm = &cc33xx_sdio_pm_ops, + }, +}; +#else +static struct sdio_driver cc33xx_sdio_driver = { + .name = "cc33xx_sdio", + .id_table = cc33xx_devices, + .probe = sdio_cc33xx_probe, + .remove = sdio_cc33xx_remove, +}; +#endif /* CONFIG_PM */ + +static int __init sdio_cc33xx_init(void) +{ + return sdio_register_driver(&cc33xx_sdio_driver); +} + +static void __exit sdio_cc33xx_exit(void) +{ + sdio_unregister_driver(&cc33xx_sdio_driver); +} + +module_init(sdio_cc33xx_init); +module_exit(sdio_cc33xx_exit); + +module_param(dump, bool, 0600); +MODULE_PARM_DESC(dump, "Enable sdio read/write dumps."); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SDIO transport for Texas Instruments CC33xx WLAN driver"); +MODULE_AUTHOR("Michael Nemanov "); +MODULE_AUTHOR("Sabeeh Khan ");