diff -uprN a/drivers/net/wireless/rsi/91x/Makefile b/drivers/net/wireless/rsi/91x/Makefile
--- a/drivers/net/wireless/rsi/91x/Makefile	1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/wireless/rsi/91x/Makefile	2014-01-30 16:25:13.800523737 +0530
@@ -0,0 +1,9 @@
+ifeq ($(CONFIG_RSI_USB), y)
+	ccflags-y =-DUSE_USB_INTF
+else
+	ccflags-y =-DUSE_SDIO_INTF
+endif
+ccflags-y += -Iinclude/
+rsi_91x-y := rsi_91x_mac80211.o rsi_91x_mgmt.o rsi_91x_pkt.o \
+	     rsi_91x_dev_ops.o rsi_91x_main.o
+obj-$(CONFIG_RSI_91x) := rsi_91x.o
diff -uprN a/drivers/net/wireless/rsi/91x/rsi_91x_dev_ops.c b/drivers/net/wireless/rsi/91x/rsi_91x_dev_ops.c
--- a/drivers/net/wireless/rsi/91x/rsi_91x_dev_ops.c	1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/wireless/rsi/91x/rsi_91x_dev_ops.c	2014-01-30 16:25:13.803524118 +0530
@@ -0,0 +1,661 @@
+/**
+ * @file rsi_91x_dev_ops.c
+ * @author
+ * @version 1.0
+ *
+ * @section LICENSE
+ * Copyright (c) 2013 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * @section DESCRIPTION
+ *
+ * The file contains the initialization part of the SDBus driver and Loading of
+ * the TA firmware.
+ */
+
+#include <linux/firmware.h>
+#include "../include/rsi_main.h"
+#include "../include/rsi_hw_intf.h"
+#include "../include/rsi_device_ops.h"
+
+static struct ta_metadata {
+	unsigned char *name;
+	unsigned int address;
+} metadata[] = {
+	{"rsi_91x.fw", 0x00000000},
+};
+
+/**
+ * This function prepares the skb.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @param  buffer Pointer to the packet data.
+ * @param  pkt_len Length of the packet.
+ * @param  extended_desc Extended descriptor.
+ * @return Successfully created netbuf control block.
+ */
+static struct sk_buff *rsi_prepare_skb(struct rsi_common *common,
+				       unsigned char *buffer,
+				       unsigned int pkt_len,
+				       unsigned char extended_desc)
+{
+	struct ieee80211_tx_info *info;
+	struct skb_info *rx_params;
+	struct sk_buff *skb = NULL;
+	unsigned char payload_offset;
+
+	if (!pkt_len) {
+		rsi_dbg(ERR_ZONE, "%s: Dummy pkt has come in\n", __func__);
+		return NULL;
+	}
+
+	if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) {
+		rsi_dbg(ERR_ZONE, "%s: Toooo big packet %d\n", __func__,
+			pkt_len);
+		pkt_len = RSI_RCV_BUFFER_LEN * 4;
+	}
+
+	if ((pkt_len < RSI_HEADER_SIZE) || (pkt_len < MIN_802_11_HDR_LEN)) {
+		rsi_dbg(ERR_ZONE, "%s: Too small packet %d\n", __func__,
+			pkt_len);
+	}
+
+	pkt_len -= extended_desc;
+	skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ);
+	if (skb == NULL)
+		return NULL;
+
+	payload_offset = (extended_desc + FRAME_DESC_SZ);
+	skb_put(skb, pkt_len);
+	memcpy((skb->data), (buffer + payload_offset), skb->len);
+
+	info = IEEE80211_SKB_CB(skb);
+	rx_params = (struct skb_info *)info->driver_data;
+	rx_params->rssi = rsi_get_rssi(buffer);
+	rx_params->channel = rsi_get_connected_channel(common->priv);
+
+	return skb;
+}
+
+/**
+ * This function read frames from the SD card.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @return 0 on success, -1 on failure.
+ */
+static int rsi_read_pkt(struct rsi_common *common)
+{
+#ifdef USE_SDIO_INTF
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_common_ops *common_ops = common->common_ops;
+	unsigned char num_blks = 0;
+	unsigned int rcv_pkt_len = 0;
+	int status = 0;
+#endif
+	unsigned char *frame_desc = NULL;
+	unsigned int index, length = 0;
+	unsigned short actual_length = 0, offset;
+	struct sk_buff *skb = NULL;
+	unsigned int queueno;
+	unsigned char extended_desc;
+
+#ifdef USE_SDIO_INTF
+	status = common_ops->read_register(adapter,
+					   SDIO_RX_NUM_BLOCKS_REG,
+					   &num_blks);
+
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to read pkt length from the card:\n",
+			__func__);
+		return status;
+	}
+	rcv_pkt_len = (num_blks * 256);
+
+	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
+	if (!common->rx_data_pkt) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
+			__func__);
+		return -1;
+	}
+
+	status = common_ops->host_intf_read_pkt(adapter,
+						common->rx_data_pkt,
+						rcv_pkt_len);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
+			__func__);
+		goto fail;
+	}
+#endif
+	index = 0;
+	do {
+		frame_desc = &common->rx_data_pkt[index];
+		actual_length = *(unsigned short *)&frame_desc[0];
+		offset = *(unsigned short *)&frame_desc[2];
+
+		queueno = rsi_get_queueno(frame_desc, offset);
+		length = rsi_get_length(frame_desc, offset);
+		extended_desc = rsi_get_extended_desc(frame_desc, offset);
+
+		switch (queueno) {
+		case RSI_WIFI_DATA_Q:
+			skb = rsi_prepare_skb(common,
+					      (frame_desc + offset),
+					      length,
+					      extended_desc);
+			if (skb == NULL)
+				goto fail;
+
+			rsi_indicate_pkt_to_os(common, skb);
+			break;
+
+		case RSI_WIFI_MGMT_Q:
+			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
+			break;
+
+		default:
+			rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
+				__func__,   queueno);
+			common->common_ops->print(ERR_ZONE,
+						  common->rx_data_pkt,
+						  200);
+			goto fail;
+		}
+
+		index  += actual_length;
+#ifdef USE_USB_INTF
+	} while (0);
+#else
+		rcv_pkt_len -= actual_length;
+	} while (rcv_pkt_len);
+	kfree(common->rx_data_pkt);
+#endif
+	return 0;
+fail:
+	kfree(common->rx_data_pkt);
+	return -1;
+}
+
+
+#ifdef USE_SDIO_INTF
+/**
+ * This function read and process the SDIO interrupts.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @return None.
+ */
+void rsi_interrupt_handler(struct rsi_common *common)
+{
+	int status;
+	enum SDIO_INTERRUPT_TYPE isr_type;
+	unsigned char isr_status = 0;
+	unsigned char fw_status = 0;
+	struct rsi_common_ops *common_ops = common->common_ops;
+
+	common->rx_info.sdio_int_counter++;
+
+	do {
+		mutex_lock(&common->tx_rxlock);
+		status = common_ops->read_register(common->priv,
+						   RSI_FN1_INT_REGISTER,
+						   &isr_status);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to Read Intr Status Register\n",
+				__func__);
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+
+		if (isr_status == 0) {
+			common_ops->set_event(&common->tx_event);
+			common->rx_info.sdio_intr_status_zero++;
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+
+		rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
+			__func__, isr_status, (1 << MSDU_PKT_PENDING),
+			(1 << FW_ASSERT_IND));
+
+		do {
+			RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
+
+			switch (isr_type) {
+			case BUFFER_AVAILABLE:
+				common->rx_info.watch_bufferfull_count = 0;
+				common->rx_info.buffer_full = false;
+				common->rx_info.mgmt_buffer_full = false;
+				common_ops->ack_interrupt(common->priv,
+						     (1 << PKT_BUFF_AVAILABLE));
+				common_ops->set_event((&common->tx_event));
+				rsi_dbg(ISR_ZONE,
+					"%s: ==> BUFFER_AVILABLE <==\n",
+					__func__);
+				common->rx_info.buf_avilable_counter++;
+				break;
+
+			case FIRMWARE_ASSERT_IND:
+				rsi_dbg(ERR_ZONE,
+					"%s: ==> FIRMWARE Assert <==\n",
+					__func__);
+				status = common_ops->read_register(common->priv,
+							SDIO_FW_STATUS_REG,
+							&fw_status);
+				if (status) {
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to read f/w reg\n",
+						__func__);
+				} else {
+					rsi_dbg(ERR_ZONE,
+						"%s: Firmware Status is 0x%x\n",
+						__func__ , fw_status);
+					common_ops->ack_interrupt(common->priv,
+							(1 << FW_ASSERT_IND));
+				}
+
+				common->fsm_state = FSM_CARD_NOT_READY;
+				break;
+
+			case MSDU_PACKET_PENDING:
+				rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
+				common->rx_info.total_sdio_msdu_pending_intr++;
+
+				status = rsi_read_pkt(common);
+				if (status) {
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to read pkt\n",
+						__func__);
+					mutex_unlock(&common->tx_rxlock);
+					return;
+				}
+				break;
+			default:
+				common_ops->ack_interrupt(common->priv,
+							  isr_status);
+				common->rx_info.total_sdio_unknown_intr++;
+				isr_status = 0;
+				rsi_dbg(ISR_ZONE,
+					"Unknown Interrupt %x\n",
+					isr_status);
+				break;
+			}
+			isr_status ^= BIT(isr_type - 1);
+		} while (isr_status);
+		mutex_unlock(&common->tx_rxlock);
+	} while (1);
+	return;
+}
+EXPORT_SYMBOL(rsi_interrupt_handler);
+#endif
+
+
+#ifdef USE_SDIO_INTF
+/**
+ * This function sets the AHB master access MS word in the SDIO slave registers.
+ *
+ * @param  adapter Pointer to the adapter structure.
+ * @param  ms_word ms word need to be initialized.
+ * @return status: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
+					 unsigned short ms_word)
+{
+	struct rsi_common *common = adapter->priv;
+	struct rsi_common_ops *common_ops = common->common_ops;
+	unsigned char byte;
+	unsigned char reg_dmn = 0;
+	int status = 0;
+
+	byte = (unsigned char)(ms_word & 0x00FF);
+
+	rsi_dbg(INIT_ZONE,
+		"%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);
+
+	status = common_ops->write_register(adapter,
+					    reg_dmn,
+					    SDIO_MASTER_ACCESS_MSBYTE,
+					    &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: fail to access MASTER_ACCESS_MSBYTE\n",
+			__func__);
+		return -1;
+	}
+
+	byte = (unsigned char)(ms_word >> 8);
+
+	rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
+	status = common_ops->write_register(adapter,
+					    reg_dmn,
+					    SDIO_MASTER_ACCESS_LSBYTE,
+					    &byte);
+	return status;
+}
+#endif
+
+/**
+ * This function includes the actual funtionality of copying the TA firmware to the card.
+ * Basically this function includes opening the TA file,reading the TA file and
+ * writing their values in blocks of data.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @param  fw Pointer to the firmware value to be written.
+ * @param  len length of firmware file.
+ * @param  num_blocks Number of blocks to be written to the card.
+ * @return 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+			    const unsigned char *fw,
+			    unsigned int len,
+			    unsigned int num_blocks)
+{
+	struct rsi_hw *adapter = common->priv;
+	unsigned int indx, ii;
+	unsigned int block_size = adapter->tx_blk_size;
+	struct rsi_common_ops *common_ops = common->common_ops;
+	unsigned int lsb_address;
+#ifdef USE_SDIO_INTF
+	unsigned int data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
+				TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
+	unsigned int address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
+				   TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
+#endif
+	unsigned int base_address;
+	unsigned short msb_address;
+
+	base_address = metadata[0].address;
+	msb_address = base_address >> 16;
+
+	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+		lsb_address = base_address;
+#ifdef USE_SDIO_INTF
+		lsb_address = ((unsigned short) base_address |
+				RSI_SD_REQUEST_MASTER);
+#endif
+		if (common_ops->load_firmware(adapter,
+					      lsb_address,
+					      (unsigned char *)(fw + indx),
+					      block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load %s blk\n", __func__,
+				metadata[0].name);
+			return -1;
+		}
+		rsi_dbg(INIT_ZONE, "%s: loading %s block: %d\n",
+			__func__, metadata[0].name, ii);
+		base_address += block_size;
+#ifdef USE_SDIO_INTF
+		if ((base_address >> 16) != msb_address) {
+			msb_address += 1;
+			if (rsi_sdio_master_access_msword(adapter,
+							  msb_address)) {
+				rsi_dbg(ERR_ZONE,
+					"%s: Unable to set ms word reg\n",
+					__func__);
+				return -1;
+			}
+		}
+#endif
+	}
+
+	if (len % block_size) {
+		lsb_address = base_address;
+#ifdef USE_SDIO_INTF
+		lsb_address |= ((unsigned short) base_address |
+				RSI_SD_REQUEST_MASTER);
+#endif
+		if (common_ops->load_firmware(adapter,
+					      lsb_address,
+					      (unsigned char *)(fw + indx),
+					      len % block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load %s blk\n", __func__,
+				metadata[0].name);
+			return -1;
+		}
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Succesfully loaded %s instructions\n", __func__,
+		metadata[0].name);
+
+#ifdef USE_SDIO_INTF
+
+	if (rsi_sdio_master_access_msword(adapter, 0x2200)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return -1;
+	}
+
+	for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
+		/* Bringing TA out of reset */
+		if (common_ops->write_reg_multiple(adapter,
+						   (address[ii] |
+						    RSI_SD_REQUEST_MASTER),
+						   (unsigned char *)&data[ii],
+						   4)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to hold TA threads\n", __func__);
+			return -1;
+		}
+	}
+#endif
+	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+	return 0;
+}
+
+/**
+ * This function reads the firmware version from the firmware file.
+ *
+ * @param  fw Pointer to the firmware  data.
+ * @param  fw_ver Pointer to firmware version_info structure.
+ * @return None
+ */
+static void rsi_fill_fw_ver(const unsigned char *fw,
+			    struct version_info *fw_ver)
+{
+	fw_ver->major = (fw[LMAC_VER_OFFSET] & 0xFF);
+	fw_ver->minor = (fw[LMAC_VER_OFFSET + 1] & 0xFF);
+	fw_ver->release_num = (fw[LMAC_VER_OFFSET + 2] & 0xFF);
+	fw_ver->patch_num = (fw[LMAC_VER_OFFSET + 3] & 0xFF);
+	fw_ver->info.fw_ver[0] = (fw[LMAC_VER_OFFSET + 4] & 0xFF);
+	return;
+}
+
+/**
+ * This function includes the actual funtionality of loading the TA firmware.
+ * This function also includes opening the TA file,reading the TA file and
+ * writing their values in blocks of data.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @param  fw_status Firmware status.
+ * @return status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common,
+				    unsigned short fw_status)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct version_info *fw_ver = &common->fw_ver;
+	unsigned int len;
+	unsigned int num_blocks;
+	const unsigned char *fw;
+	const struct firmware *fw_entry = NULL;
+	unsigned int block_size = adapter->tx_blk_size;
+	int status = 0;
+
+#ifdef USE_SDIO_INTF
+	unsigned int base_address;
+	unsigned short msb_address;
+
+	if (rsi_sdio_master_access_msword(adapter, 0x2200)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return -1;
+	}
+	base_address = metadata[0].address;
+	msb_address = (base_address >> 16);
+
+	if (rsi_sdio_master_access_msword(adapter, msb_address)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word reg\n", __func__);
+		return -1;
+	}
+#endif
+
+	status = request_firmware(&fw_entry, metadata[0].name, adapter->device);
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+			__func__, metadata[0].name);
+		return status;
+	}
+
+	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	len = fw_entry->size;
+
+#ifdef USE_USB_INTF
+	if (fw_status) {
+#endif
+		rsi_fill_fw_ver(fw, fw_ver);
+#ifdef USE_USB_INTF
+		return 0;
+	}
+#endif
+
+	if (len % 4)
+		len += (4 - (len % 4));
+
+	num_blocks = (len / block_size);
+
+	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+	status = rsi_copy_to_card(common, fw, len, num_blocks);
+	release_firmware(fw_entry);
+	return status;
+}
+
+/**
+ * This function is a kernel thread to send the packets to the device.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @return None.
+ */
+void rsi_tx_scheduler_thread(struct rsi_common *common)
+{
+	struct rsi_common_ops *common_ops = common->common_ops;
+
+	do {
+		if (common->rx_info.buffer_full) {
+			common_ops->wait_queue_event(&common->tx_event, 2);
+			rsi_dbg(INFO_ZONE,
+				"%s: Event wait for 2ms\n", __func__);
+		} else {
+			common_ops->wait_queue_event(&common->tx_event,
+						     EVENT_WAIT_FOREVER);
+		}
+		common_ops->reset_event(&common->tx_event);
+
+		if (common->init_done)
+			common_ops->qos_processor(common);
+	} while (atomic_read(&common->tx_thread_done) == 0);
+	complete_and_exit(&common->tx_thread.completion, 0);
+}
+EXPORT_SYMBOL(rsi_tx_scheduler_thread);
+
+#ifdef USE_USB_INTF
+/**
+ * This is a kernel thread to receive the packets from the USB device.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @return None.
+ */
+void rsi_usb_rx_thread(struct rsi_common *common)
+{
+	struct rsi_common_ops *common_ops = common->common_ops;
+	struct rsi_hw *adapter = common->priv;
+
+	while (1) {
+		common_ops->wait_queue_event(&common->rx_event,
+					     EVENT_WAIT_FOREVER);
+
+		if (atomic_read(&common->rx_thread_done))
+			goto out;
+
+		mutex_lock(&common->tx_rxlock);
+		if (rsi_read_pkt(common)) {
+			rsi_dbg(ERR_ZONE, "%s: Failed to read pkt\n", __func__);
+			mutex_unlock(&common->tx_rxlock);
+			goto out;
+		}
+		mutex_unlock(&common->tx_rxlock);
+		common_ops->reset_event(&common->rx_event);
+		if (common_ops->rx_urb_submit(adapter)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed in urb submission\n", __func__);
+			goto out;
+		}
+	}
+
+out:
+	rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
+	atomic_inc(&common->rx_thread_done);
+	complete_and_exit(&common->rx_thread.completion, 0);
+	return;
+}
+EXPORT_SYMBOL(rsi_usb_rx_thread);
+#endif
+
+/**
+ * This Function Initializes The HAL.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @param  fw_status Firmware status.
+ * @return 0 on success, -1 on failure.
+ */
+int rsi_device_init(struct rsi_common *common, unsigned short fw_status)
+{
+	rsi_set_default_parameters(common);
+
+	if (rsi_load_ta_instructions(common, fw_status))
+		return -1;
+
+#ifdef USE_SDIO_INTF
+	if (rsi_sdio_master_access_msword(common->priv, 0x4105)) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
+			__func__);
+		return -1;
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Setting ms word to 0x41050000\n", __func__);
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL(rsi_device_init);
+
+/**
+ * This Function de-initializes The HAL.
+ *
+ * @param  adapter Pointer to the adapter structure.
+ * @return 0 on success.
+ */
+int rsi_device_deinit(struct rsi_hw *adapter)
+{
+	rsi_mac80211_detach(adapter);
+	return 0;
+}
+EXPORT_SYMBOL(rsi_device_deinit);
diff -uprN a/drivers/net/wireless/rsi/91x/rsi_91x_main.c b/drivers/net/wireless/rsi/91x/rsi_91x_main.c
--- a/drivers/net/wireless/rsi/91x/rsi_91x_main.c	1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/net/wireless/rsi/91x/rsi_91x_main.c	2014-01-30 16:25:13.984547126 +0530
@@ -0,0 +1,94 @@
+/**
+ * @file rsi_91x_main.c
+ * @author
+ * @version 1.0
+ *
+ * @section LICENSE
+ * Copyright (c) 2013 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * @section DESCRIPTION
+ *
+ * This file contians the code specific to file operations like creation, open,
+ * reading/ writing to the files
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../include/rsi_main.h"
+#include "../include/rsi_device_ops.h"
+
+unsigned int rsi_zone_enabled = /*INFO_ZONE |
+				INIT_ZONE |
+				MGMT_TX_ZONE |
+				MGMT_RX_ZONE |
+				DATA_TX_ZONE |
+				DATA_RX_ZONE |
+				FSM_ZONE |
+				ISR_ZONE | */
+				ERR_ZONE |
+				0;
+EXPORT_SYMBOL(rsi_zone_enabled);
+
+/**
+ * This function reads parameters of module connected.
+ *
+ * @param  common Pointer to the driver private structure.
+ * @return 0 on success, -1 on failure.
+ */
+int rsi_set_default_parameters(struct rsi_common *common)
+{
+	common->rftype = RSI_RF_8111;
+	common->band = IEEE80211_BAND_2GHZ;
+	common->channel_width = BW_20MHZ;
+	common->rts_threshold = MAX_RTS_THRESHOLD;
+	common->channel = 1;
+	common->min_rate = 0xffff;
+	common->fsm_state = FSM_CARD_NOT_READY;
+	return 0;
+}
+
+/**
+ * This function is invoked when the module is loaded into the kernel.
+ * It registers the client driver.
+ *
+ * @param  Void.
+ * @return 0 on success, -1 on failure.
+ */
+static int rsi_91x_hal_module_init(void)
+{
+	rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__);
+	return 0;
+}
+
+/**
+ * This function is called at the time of removing/unloading the module.
+ * It unregisters the client driver.
+ *
+ * @param  Void.
+ * @return None.
+ */
+static void rsi_91x_hal_module_exit(void)
+{
+	rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__);
+	return;
+}
+
+module_init(rsi_91x_hal_module_init);
+module_exit(rsi_91x_hal_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Station driver for RSI 91x driver");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
